SGS5913 - Dishwasher BOSCH - Free user manual and instructions
Find the device manual for free SGS5913 BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher (or freestanding depending on model) |
| Brand | Bosch |
| Model | SGS5913 |
| Dimensions (H x W x D) | 84.5 cm x 60 cm x 60 cm |
| Net weight | Approximately 50 kg |
| Energy class | A+ (according to current standard) |
| Water consumption per cycle | 12 L (Eco program) |
| Power consumption per cycle | 1.05 kWh (Eco program) |
| Noise level | 48 dB(A) re 1 pW |
| Number of place settings | 12 standard place settings |
| Wash programs | Intensive, Eco, Quick (45 min), Daily, Pre-rinse, Delicate |
| Additional functions | Delay start (1-24 h), Half load, VarioSpeed, Intensive drying |
| Tub material | Stainless steel |
| Child safety | Yes (integrated door stop) |
| Leak protection | AquaStop (full leak protection) |
| Installation type | Built-in (removable decor panel) |
| Noise level | 48 dB(A) |
| Maintenance and cleaning | Regular cleaning of filters and spray arms recommended every 3 months |
| Spare parts and repairability | Repairability index 8.0/10 (according to manufacturer data) |
Frequently Asked Questions - SGS5913 BOSCH
How to install my Bosch SGS5913 dishwasher?
Installation must be carried out by a professional. Ensure that the water supply (hot or cold) and drainage are properly connected. The appliance level can be adjusted using the adjustable feet. Consult the installation plan provided.
Which detergents to use?
Use suitable dishwasher tablets, powder or liquid. Add regeneration salt in the dedicated compartment and rinse aid for optimal drying. Follow the dosages indicated on the packaging.
Why does my dishwasher not start?
First check that the appliance is plugged in and the door is properly closed. Make sure the program is not in delay start. If the 'Water' indicator flashes, check the water supply and the inlet filter.
How to clean the filters?
Regularly remove the combination filter at the bottom of the tub (usually every 2-4 weeks). Rinse under clean water and remove residues. Replace it following the mounting orientation. A clogged filter can reduce washing efficiency.
What to do in case of error code E15?
The E15 code indicates a leak detection (AquaStop has triggered). Turn off the water supply, unplug the appliance and contact customer service. Do not attempt to repair it yourself.
How to adjust the regeneration salt level?
The adjustment is made via the control panel (depending on model). Refer to the manual to access the setup menu. A level too low causes limescale on parts, a level too high leaves white residues.
Can the dishwasher be used half loaded?
Yes, activate the Half load function to save water and energy. The program then adjusts the duration accordingly. Place the dishes in the upper or lower basket as needed.
How to avoid white stains on dishes?
White stains are often due to a lack of rinse aid or too high a salt setting. Increase the rinse aid dosage and check the salt level. Use a quality product.
What is the duration of the Eco program?
The Eco program lasts about 3 hours at 50°C. It is designed to be the most water and energy efficient while ensuring satisfactory washing.
How to get spare parts?
Spare parts are available from the Bosch customer service or authorized dealers. Use the model number (SGS5913) to order. Visit the website to find a repair center.
User questions about SGS5913 BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SGS5913 - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SGS5913 by BOSCH.