RE3000W - Wi-Fi repeater LINKSYS - Free user manual and instructions
Find the device manual for free RE3000W LINKSYS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AC1200 Wi-Fi Range Extender |
| Dimensions | Approx. 7.2 x 5.8 x 3.5 cm |
| Weight | Approx. 150 g |
| Power | 100-240 V AC via integrated power plug |
| Processor | Realtek RTL8197FS |
| Wi-Fi Standards | IEEE 802.11ac/n/g/b/a |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Speed | Up to 867 Mbps (5 GHz) + 300 Mbps (2.4 GHz) |
| Ethernet Port | 1 x 10/100/1000 Mbps port |
| Main Functions | Wi-Fi range extension, access point, repeater mode |
| Security | WPA2/WPA-PSK, WEP |
| Configuration | Via Linksys app or web interface |
| Maintenance and Cleaning | Unplug and wipe with a dry cloth |
| Spare Parts and Repairability | Not applicable, sealed device |
| General Information | 2-year warranty, compatible with any router |
Frequently Asked Questions - RE3000W LINKSYS
How to set up my Linksys RE3000W extender?
Plug the extender into an outlet near your router. Use the Linksys app or connect to the web interface via http://extenderLinksys.com. Follow the setup wizard to select your Wi-Fi network and enter the password.
What to do if the LED is red?
A red LED indicates poor connection to the router. Move the extender closer to the router or check that the Wi-Fi password is correct. Press the WPS button if your router supports it.
How to reset the extender to factory settings?
Press and hold the Reset button on the back of the device for about 10 seconds until the LED blinks orange. Release and wait for it to restart.
The extender is not connecting to my router, why?
Make sure the router is on and that you are entering the correct Wi-Fi password. Check that the extender is within range of the router. If the problem persists, reset the extender and try again.
What is the range of the RE3000W?
The range depends on the environment: up to 300 meters in open outdoor areas. Indoors, expect 30 to 50 meters depending on obstacles. The extender covers about 200 m².
Can I use the extender as an access point?
Yes, in access point mode, connect it directly to the router via an Ethernet cable. Configure it in the interface by selecting AP (Access Point) mode.
How to update the firmware?
In the web interface, go to Administration > Firmware Upgrade. Download the latest firmware from the Linksys website and follow the instructions. Do not power off during the update.
The speed is slow, what to do?
Place the extender halfway between the router and the area to cover. Avoid metal obstacles. Check that the firmware is up to date. Test on the 5 GHz band for better performance.
Does the extender heat up normally?
Slight warmth is normal during intensive use. Make sure the ventilation slots are not blocked. In case of excessive overheating, unplug it and contact support.
Is it compatible with my internet service provider?
Yes, the RE3000W is compatible with any standard router, regardless of your ISP (Orange, SFR, Free, etc.). It works with standard internet boxes.
User questions about RE3000W LINKSYS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual RE3000W - LINKSYS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RE3000W by LINKSYS.
USER MANUAL RE3000W LINKSYS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LINKSYS
Model : RE3000W
Category : Wi-Fi repeater