SmartPad Hx 8 HD - Tablet Mediacom - Free user manual and instructions

Product Type	Touchscreen Tablet
Brand	Mediacom
Model	SmartPad Hx 8 HD
Screen Size	8 inches HD
Screen Resolution	1280 x 800 pixels
Processor	Quad-core 1.3 GHz
RAM Memory	1 GB
Internal Storage	16 GB (expandable via microSD)
Operating System	Android
Wi-Fi Connectivity	Wi-Fi 802.11 b/g/n
Bluetooth	Bluetooth 4.0
Rear Camera	2 Megapixels
Front Camera	0.3 Megapixel
Battery	Lithium-ion 4000 mAh
Approximate Battery Life	Up to 6 hours
Dimensions	210 x 125 x 9 mm
Weight	350 g
Power Supply	5V 2A via microUSB
Care and Cleaning	Soft dry cloth, avoid liquids
Safety	Use in a dry and temperate environment
Spare parts and repairability	Contact Mediacom customer service

Frequently Asked Questions - SmartPad Hx 8 HD Mediacom

How to turn on the SmartPad Hx 8 HD tablet?

Press the power button located on the side of the device for 2 seconds until the Mediacom logo appears.

How to insert a microSD card?

Locate the microSD slot on the edge of the tablet, insert the card with the gold contacts facing down until it clicks into place.

How to perform a factory reset?

Go to Settings > Backup & reset > Factory data reset. Confirm the operation. All data will be erased.

The tablet is not charging, what should I do?

Check the microUSB cable, power adapter, and outlet. Try another cable. If the problem persists, contact Mediacom support.

How to connect the tablet to a TV?

The tablet does not have native HDMI output. Use a microUSB to HDMI adapter (not included) or a wireless connection via Chromecast.

Which version of Android is installed?

The tablet runs on Android 9.0 Pie (version subject to update depending on versions).

How to take a screenshot?

Press and hold the Volume Down and Power buttons simultaneously for 2 seconds. The image is saved in the gallery.

Can I use a Bluetooth keyboard?

Yes, enable Bluetooth in settings, pair the keyboard following the manufacturer's instructions.

How to clean the screen?

Use a microfibre cloth slightly dampened with water. Wipe gently without pressing. Do not use chemical products.

What to do if the touch screen stops responding?

Try restarting the tablet by holding down the power button. If the problem persists, perform a hardware reset.

USER MANUAL SmartPad Hx 8 HD Mediacom

Picture 3

SMARTPAD

Quick Start Guide Safety precautions

For safe and efficient operation of your Tablet PC, please observe the following rules:

• Keep the Tablet away from extreme heat, cold, moisture and dust.
• Do not spill any liquids on the Tablet PC as it may damage the device or cause a fire.
• Do not use liquids and chemical cleaners for cleaning the Tablet PC.
• Do not insert any objects in the Tablet air vents or other slots.
• Do not keep the device near magnetic sources, heaters, microwave ovens, heating up kitchen appliances, or in high pressure containers, as it may cause the battery leaking, the device overheating and inflammation.
• Do not disassemble the Tablet PC, only a certified service technician should perform repairs on your computer.
• Use only the AC adapters, power cords and batteries that are approved for use with this device. Use of another type of battery or AC adapter may cause fire or explosion.

Note: The device pictures, as well as data on the device appearance, color and design features are given in the manual for reference only. Mediacom reserves the right to change the appearance and technical parameters of its products without prior notice.

About your device (Picture 1)

Power button1.

Volume Bottoms2.

USB port – connecting 3.

your computer

4.5.SIM card slot (optional)

Micro SD card slot6.

Speaker 7.

Earphone port8.

Reset port (if available)9.

Rear camera (optional)10.

1. Front camera

2. DC-in (if available)

3. Microphone (if available)

4. Back (if available)

Switching on/off

To switch on the Tablet PC, press and hold the Power button. When startup window appears, release the button. The system initialization may take several minutes. Please wait patiently.

To switch off the tablet PC, press and hold the Power button. When "Power off" message appears, release the button. Touch the message, then press OK.

Recommendation: To save the battery charge, the device is set to sleep mode: the screen is locked and sensor functions become inactive (in accordance with the settings of screen lock time). To "wake up" the device, short press the power button.

Unlocking the screen (Picture 2)

If you do not use the screen during certain period of time, the screen will be locked. To unlock the screen, press the power button once and drag "Lock" image right.

Main screen (Picture 3)

Voice search (if available)

1.

Application menu2.

Battery charge indicator3.

Time4.

Connected to PC 5.

Recently used applications6.

Home7.

Back 8.

Google search9.

Clock10.

1. Standard application button

Restarting the device

If the screen does not response to key press or tap, press the reset button (located in the hole) using any thin object (paper clip, pin, etc.) to restart your Tablet PC or keep power button for long time

Factory reset

To delete all data and restore your Tablet PC to factory defaults, touch Settings > > Recovery and reset; touch menu item Reset > Reset to factory defaults.

Contents

Tablet, USB Cable, OTG Cable (optional), Power adapter AC / DC, Quick Guide

Charging the battery

Device is provided with built in rechargeable battery There is no need of supplemental batteries. Important: The battery must be charged before using it for the first time. When related Icon or warning message alerts you please charge the battery using porper adapter (do not use diefferent adapter from original one).

Wireless networks

Prior to starting an Internet-application, activate Wi-Fi connection and set up Wi-Fi network.

Touch the icon "Applications" > "Settings" > "Wireless connections".1. Select Wi-Fi item and set the switch to On position.

1. The device will automatically start searching for available networks and will display them on the right panel.

Select any network from the list and press "Connect". If the network 3.

you selected is protected by WEP-protocol, type the security key, then press "Connect" button.

When the connection is successfully created, "Connected to" (Network name) message will appear on the screen.

3G networks (Optional)

Note that your Tablet PC will only have signal if you are in an area covered by your 3G provider's 3G or EDGE network.

Before inserting a SIM card, you must turn off the device.

A Pin number may be requested. Enter the SIM card pin number.

Your device will attempt to connect to the 3G network of your provider.

NOTE: If your device does not connect to your 3G provider's network

Contact your 3G provider to obtain the connection parameters.1.

On your device, tap the Menu icon, then settings.2.

Select Wireless & networks > Mobile networks > Select your operator.3. In Access Point Names, select the correct access point name and enter the exact connection parameters.

Bluetooth (Optional)

Tap "Settings" > Select "Wireless connections/Bluetooth" > Tap "On" to switch on the Bluetooth function. The device will automatically search for available Bluetooth device.

Select the Bluetooth device and start data transmission.

Imported and distributed by Datamatic S.p.A.

Via Agordat, 34 - 20127 - Milano - Italy

www.mediacomeurope.it