UGS-125 - Steam cleaner Unit - Free user manual and instructions

Product Type	Steam Cleaner
Model	UGS-125
Brand	Unit
Dimensions (L x W x H)	Approx. 30 x 25 x 35 cm
Weight	Approx. 2.5 kg
Power	1200-1500 W
Water Tank Capacity	Approx. 0.6 L
Heat-Up Time	Approx. 3 minutes
Steam Pressure	3-4 bar
Steam Flow Rate	Adjustable, up to 30 g/min
Functions	Steam jet, continuous steam, adjustable steam output
Accessories Included	Steam nozzle, brush, extension tube, microfiber cloth
Safety Features	Overheat protection, pressure relief valve, child lock
Maintenance	Descaling recommended every 1-2 months
Repairability	Spare parts available; user-replaceable seals and nozzles
General Information	Suitable for hard floors, tiles, windows, and kitchen surfaces

Frequently Asked Questions - UGS-125 Unit

How do I fill the water tank?

Unplug the unit. Open the water tank cap, fill with tap water (or distilled water if descaling) up to the MAX line. Close cap securely.

Can I use this steam cleaner on carpets?

No, this steam cleaner is designed for hard surfaces like tiles, wood floors, glass and metal. Do not use on carpets or delicate fabrics.

How long does the heat-up time take?

Approximately 3 minutes. The indicator light will turn off when steam is ready.

What should I do if steam output is weak?

Check if water tank is empty. Clean the nozzle to remove any blockages. If problem persists, descale the unit using a suitable descaling solution.

How do I descale the steam cleaner?

Fill tank with a 50/50 mixture of water and white vinegar. Let it sit for 30 minutes, then empty and rinse thoroughly with clean water before use.

Is the steam cleaner safe to use around children?

The steam output is very hot. Keep children away during use and for some time after switching off. The child lock helps prevent accidental activation.

Can I use cleaning agents in the water tank?

No, do not add detergents or chemicals. Only use clean water. Using additives may damage the unit and void warranty.

What surfaces can I clean?

Ideal for sealed hard floors, tiles, ceramic cooktops, windows, stainless steel, and bathroom fixtures. Avoid waxed wood, fabric, and electronics.

How do I store the steam cleaner?

Allow unit to cool completely. Empty water tank. Store in a dry place, with the nozzle and accessories detached. Do not wrap cord tightly around unit.

Where can I find spare parts?

Spare parts such as nozzles, brushes, and seals are available through Unit official distributors or online parts stores. Check your user manual for part numbers.

USER MANUAL UGS-125 Unit

INSTRUCTION MANUAL

Thank you for buying this UNIT product!

Attention! When buying UNIT appliances you should get from a shop assistant a filled in guarantee slip. Only having a filled in guarantee slip you can be served in all the Unit service centers.

READ ALL INSTRUCTIONS BEFORE USING

Appliance application: this household appliance is produced for steaming, uncrumpling, brushing of clothes and draperies.

CONTENTS OF THE INSTRUCTION MANUAL

SAFETY NOTICES....3

APPLIANCE DESCRIPTION....4

ASSEMBLY INSTRUCTIONS....5

APPLIANCE USE....5

CARE AND CLEANING....7

TROUBLE SHOOTING....8

SPECIFICATIONS....8

SAFETY NOTICES

Before using for the first time, check if the voltage rating on the type plate corresponds to the mains voltage in your home. This appliance must be connected to an earthed socket.

- If it is absolutely necessary to use an extension cable, make sure that it is suitable for 10 A or more and has a socket with an earth connection.

- This appliance must only be used for the purposes it was designed. Any other use will be considered as improper and consequently dangerous. The manufacturer will not be held responsible for any damage arising from misuse or improper use.

- The electrical plug must not be removed from the socket by pulling the cable.

- Do not leave the appliance exposed to weather conditions (rain, sun, frost etc).

- Do not leave the appliance unattended while it is plugged in.

- Keep the appliance out of children's reach.

- This appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Remove the plug from the socket before filling the appliance with water or before pouring out the remaining water after use.

- Never immerse the appliance in water or any other fluid.

- The appliance must never be placed under the tap to fill with water.

- Do not put vinegar or other descaling agents into the water tank.

- Using distilled water or pure water is better.

- Do not try to repair any part of the appliance on your own.

- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

- Do not aim the handle at other persons or towards yourself, while using the “steam” function.

- The appliance must be used and placed on a stable surface.

- The appliance should not be used if it has been dropped, if there are visible signs of damage or if it is leaking water. It must be checked by an authorized Technical Service Center before it can be used again.

• Do not lay the hose on the ground or wind it.
• Do not touch the hot metal parts, hot water or steam to avoid burns.
• Allow the appliance to cool completely for at least 30 minutes and drain the water tank and water reservoir before storage.
• Move the appliance by grasping the telescopic pole. Do not force the casters if they are stuck. Turn off the unit, drain the water tank and water reservoir before inspecting the casters.
• Always disconnect the appliance from the outlet before filling or draining water. Be careful to avoid excess water spilling from the water reservoir.
• Unplug the unit from the outlet when not in use, when moving unit from one location to another and before cleaning.
• Do not place the unit or any parts near an open flame, cooking or other heating appliance.
• Do not operate the unit with a damaged cord, plug, after a malfunction or if dropped or damaged in any manner. • To disconnect, grip the plug and pull it from the wall outlet. Never drag the cord.
• Do not use extension cords to avoid overheating and risk of fire.
• No detergent can be added into the water tank or it will cause damage. Distilled or de-mineralized water is recommended.

This appliance has been designed exclusively for domestic use and must not be used for professional purposes.

Important!

Read these instructions for use carefully before using the appliance and save them for future reference.

This appliance complies with international safety standards.

Thank you for buying the professional garment steamer. Please read these instructions carefully. They contain valuable information about the unique features of this system and some hints to make steaming easier.

This system produces non-stop steam for ideal steaming performance. We hope you enjoy using this garment steamer.

APPLIANCE DESCRIPTION

1. Hanger for steam nozzle
2. Steam nozzle
3. Handle
4. Adjustable rack
5. Hose
6. Double telescopic pole
7. Hose connector
8. Water tank
9. Wheels
10. Power switch
11. Power indicator light
12. Power cord clips
13. Accessories storage
14. Released spanner
15. Water purifier
16. Fabric brush
17. Clothes hanger hook
18. Folding rack

ASSEMBLY INSTRUCTIONS

1. Insert Pole 1 and Pole 2 according to the diagram to the right, ensuring the poles line up and power cord clips face the water tank as shown in Figure 1.
2. If the pole is inserted incorrectly, press the Released Spanner in the direction of the arrow as illustrated in Figure 2. Then you can pull out the pole and insert it again.
3. Take the Adjustable Rack with hanger for the steam nozzle facing the front as illustrated in Figure 4. Insert both ends of the hanger into the pole connection and press both ends simultaneously into the pole until the hanger properly engages.
4. Insert the hose plug into the hose connector on the main unit. Secure the hose connector by pulling the clamping ring upwards as illustrated in Figure 4.
5. Hang the steam nozzle on the hanger as illustrated in Figure 5.

APPLIANCE USE

- Remove the water tank from the unit by grasping the handle and turn it upside down. Unscrew the cap from the bottom of the water tank. (Figures 6, 7)

- Hold the tank under cold running water and fill to the desired level. When you have finished filling the tank, screw the cap back on and turn it over. Place the water tank back into the unit and make sure it is sitting properly and securely in the cavity.

NOTE: Only fill the water tank with cold water; do not use hot water.

- Plug the steamer cord into the electrical outlet.

- Press the power switch, then the light will illuminate. Steam will emit in 40-45 seconds.

NOTE: The appliance can adjust the steam. If the power light is red, the appliance is working on MAX amount of steam, and if the power light is green, it is working on MIN amount of steam. You can press the power switch to change the amount of steam.

- Steam clothes from top down. Do not fold the hose.

- Drapes can be steamed without removing them from the eaves.

- Dense textures may require additional steaming.

- When you have finished your steaming process, press the "Off" position and remove the plug from the outlet.

NOTE: By pressing the power switch repeatedly, the appliance will turn to MAX amount of steam, MIN amount of steam, and power off.

Fabric brush assembly

The brush helps to remove lint and threads.

1. You must unplug the appliance before changing tips and wait until the steam leaves the steam nozzle.
2. Place the fabric brush over the holes of the steam nozzle and connect it. (Figure 8)

Use of Adjustable Rack

1. Pull out the adjustable rack to the necessary level, depending on the size of the clothing, as shown in Figure 9.
2. You can use the adjustable rack or the hook for clothes (Figures 10, 11).

Caution! Be careful with the hook for clothes hangers, which is located on the holder. It can be deformed under high strain.

The folding rack is suitable for hanging more than one garment for steaming (Figures 12, 13, 14).

CARE AND CLEANING

1. Make sure the appliance is completely cooled down. Unplug the unit and remove the steam hose from the main unit. Collapse the telescopic pole.
2. Fill the water tank with fresh water and attach it to the main unit again, allowing water to fill the boiler.
3. Remove the tank from the main unit and empty the water from the boiler through the open hose connector into a sink. Scale and other residues will be rinsed out.
4. Repeat Steps 2 and 3 several times until the scale has been removed.

REMOVING DEPOSITS

Deposit buildup is a common problem with steamers. It is caused by high mineral content in many municipal water supplies. Mineral residue inside the internal pipes and heater can cause interruption of steam flow or, in some cases, complete absence of it. Depending on the water quality in different regions, we advise you to remove deposits after 7-15 days of use. Please refer to the following procedure. The procedure below can be used to reduce deposits. If you do not have the opportunity to use demineralized or distilled water, it is recommended to do this procedure monthly.

1. Turn the unit off, and unplug the power cord.
2. Remove the hose and pole from the unit.
3. Drain the Water Reservoir, and empty water from the Water Tank.
4. Mix a solution of 50% vinegar and 50% water. In most cases, 2 cups of this solution will be sufficient.
5. Slowly pour the water-vinegar solution into the Hose Connector.
6. If standing the water-vinegar solution becomes visible in the Water Reservoir's inlet hole, continue to pour to solution into the Hose Connector until the Water Reservoir is about half-full, near the top of hose.
7. Allow standing for 40 minutes.
8. Drain the solution out of the Water Reservoir by removing the drain plug and allowing the liquid to drain into a sink or tub.
9. Drain the solution out of the Hose Connector by tilting the unit over a sink or tub and pouring the water out of the Hose Connector.
10. Pour clean water into the Hose Connector and Water Reservoir inlet, and drain. Repeat this step until the vinegar odor dissipates.
11. Reassemble the unit and operate normally.

If this procedure does not return the unit to normal operation, the unit needs servicing.

TROUBLESHOOTING

PROBLEM POSSIBLE	CAUSES SOLUTION
Steamer fails to heat Steamer not plugged in. The appliance is not power on		Plug in to electrical outlet. Press the power switch
No steam Water level is low Power off the appliance and		refill the water tank.
Steam is intermittent Sediment build-up in container Clean the appliance
Water drips from nozzle	Condensation in hose	Hold the hose vertically and allow water to drain back into tank
Nozzle gurgles Condensation in hose	Hold the hose vertically and	allow water to drain back into tank

SPECIFICATIONS

Capacity: 2.5 L

Voltage: 220-240 V, 50 Hz

Power: 1500-1800 W

Lifetime: 700 hours, but not more than 5 years from date of manufacture

The head office of the manufacturer:

«UNIT Handelsgesellschaft G.m.b.H.»

131, Gersthofer Str., A-1180, Vienna, Austria

Exported by:

«UNIT Electronics (H. K.) Limited»

3905 Two Exchange Square, 8 Connaught

Place, Central, Hong Kong

The Manufacturer's representative in Russia:

Unit Production Ltd, 109147, 34/10,

Marksistskaya str., Moscow, Russia,

tel. [phone], email: www.unit.ru

Made in People's Republic of China (P.R.C.)

This appliance is to be stored and used under the following conditions: temperature – not less than +5°C; relative humidity - not higher than 80%; aggressive impurities in the air: not allowable.

See the date of manufacture on the sticker on the appliance body or printed on the box. Date format: MMYY (month;year).

As the Manufacturer is constantly working on the improvement of its products, the design and technical specifications are subject to change without prior notice.

Attention!

Possible malfunctions during operation and their solutions....20

Possible malfunctions during operation and their solutions....21

Possible malfunctions during operation and their solutions....21

MAIN TECHNICAL SPECIFICATIONS.....21

Attention!