9088 WH3R - Scale SALTER - Free user manual and instructions

Product Type	Digital Bathroom Scale
Brand	Salter
Model	9088 WH3R
Color	White
Display Type	LCD, backlit
Weight Capacity	180 kg / 396 lb
Graduation	0.1 kg / 0.2 lb
Units of Measurement	kg, lb, st
Auto-On / Auto-Off	Yes
Low Battery Indicator	Yes
Overload Indicator	Yes
Power Supply	2 x CR2032 batteries (included)
Battery Life	Approximately 1 year with normal use
Platform Material	Tempered safety glass
Dimensions (W x D x H)	30 x 30 x 2.5 cm / 11.8 x 11.8 x 1.0 in
Weight	1.5 kg / 3.3 lb
Cleaning	Wipe with a damp cloth; do not immerse in water
Safety Features	Non-slip feet, shatter-resistant glass
Spare Parts	Batteries (CR2032) easily replaceable; no other user-serviceable parts
Repairability	Not repairable by user; contact Salter support
General Information	Designed for domestic use only; store in a dry place

Frequently Asked Questions - 9088 WH3R SALTER

How do I change the battery in my Salter 9088 WH3R scale?

Open the battery compartment on the underside, remove the old CR2032 battery, and insert a new one with the positive side facing up. Close the compartment securely.

Why does my scale show 'Err' or 'Overload'?

This indicates the weight exceeds the maximum capacity of 180 kg (396 lb). Step off immediately to avoid damage. The error will clear when the weight is removed.

How do I switch between kg, lb, and st?

Press the unit button on the scale (usually located under the platform or on the side) to cycle through kg, lb, and st. The selected unit will appear on the display.

My scale gives inconsistent readings. What should I do?

Ensure the scale is on a hard, flat surface. Avoid carpet or uneven floors. Make sure your feet are centered and standing still. If problems persist, replace the battery.

How do I clean my Salter scale?

Use a damp cloth to wipe the surface. Do not use abrasive cleaners or submerge the scale in water. Dry thoroughly after cleaning.

Can I use the scale on carpet?

No, for accurate readings always place the scale on a hard, level surface like tile or hardwood. Carpet can cause unstable measurements.

What does 'Lo' mean on the display?

'Lo' indicates the battery is low and needs to be replaced. Replace the CR2032 battery promptly for continued use.

Is the glass platform shatterproof?

It is made of tempered safety glass, which is strong and resistant to shattering. However, avoid dropping heavy objects on it to prevent damage.

How do I store the scale when not in use?

Store the scale in a dry, cool place away from direct sunlight. Remove the battery if storing for an extended period to prevent leakage.

Can I repair the scale if it breaks?

The scale has no user-serviceable parts other than the battery. For other repairs, contact Salter customer support or refer to the warranty.

USER MANUAL 9088 WH3R SALTER

Instructions and Guarantee

Register your product today at www.homedicsgroup.com/register

PÈSE-PERSONNE PERSONENWAAGE BALANZA PERSONAL BILANCIA PESAPERSONA

BILANÇA PESAPERSONA - BADEROMSVEKT PERSONENWEEGSCHAAL HENKHÖVAA'AT

PERSONVÁG PERSONVÆGT SZEMÉLYMÉRLEG OSOBNÍ VÁHA KİŞİSEL TERAZI

MiBODY Salter MiBody is a range of connected devices to make weight and health management easier. Measurements are sent wireless to your mobile device and can be viewed using the free to download MiBody App. Trends can be tracked over time and the measurements explained with healthy/recommended ranges. The results are stored on your personal mobile device and are private unless you choose to share your achievements.

MiBody should be used in addition with and not as a substitute to professional medical guidance. If you are concerned about any aspect of your health please seek professional medical guidance.

HOW DOES THIS SALTER SCALE WORK? This Salter Scales shows your current weight and BMI. It also remembers your previous weight and BMI readings and shows the difference. This scale stores the personal data of up to 8 users.

NEW FEATURE! This scale features our convenient step-on operation. Once initialised the scale can be operated by simply stepping straight on the platform – no more waiting!

PREPARING YOUR SCALE 1. Open the battery compartment on the scale underside.

1. Remove isolating tab from beneath the battery (if fitted) or insert batteries observing the polarity signs (+ and -) inside the battery compartment. 3. Close the battery compartment. 4. Select kg, st or lb weight mode by the switch on the underside of the scale. 5. For use on carpet attach enclosed carpet feet. 6. Position scale on a firm flat surface.

INITIALISING YOUR SCALE 1. Press the platform centre and remove your foot.

1. '0.0' will be displayed. 3. The scale will switch off and is now ready for use.

This initialisation process must be repeated if the scale is moved.

At all other times step straight on the scale.

MiBODY APP Before using your device for the first time: 1. Download and install the Salter MiBody App from the App store. Use keyword search terms "Salter" or "MiBody". 2. Turn Bluetooth "On" in the "Settings" menu of your mobile device.

1. Open the MiBody App and follow the on screen instructions to set up your user account.

PAIRING DEVICES

1. Turn Bluetooth "On" in the "Settings" menu of your mobile device.
2. Open the MiBody App.

3. Press the button.

4. Press "Add Device".

5. Press the scale to turn on the scale.
6. The App should automatically find the scale. If not, just press the "to find the scale."
7. Once found, Select the user number you wish to pair. Touch the OK button to finish.
8. If pairing is successful, the user number will flash and cycle through the user details on the scale.
9. If pairing is unsuccessful will be displayed.
10. The scale will automatically switch off.
11. Repeat procedure for each user and each mobile device.
    Note: Each user number can only be paired with one mobile device. Results will be sent to the paired device only.

WEIGHT READING ONLY 1. Step on and stand very still while the scale computes your weight. 2. Your weight is displayed. 3. Step off. Your weight will be displayed for a few seconds. 4. The scale will switch off.

AUTO USER DETECTION Auto User Detection allows Weight and BMI readings by simply stepping straight onto the platform – no more waiting! The scale recognises a user +/-2.5kg from the previous weight reading.

NOTE: A user number must be set up and previous weight reading taken to use Auto User Detection.

PERSONAL DATA ENTRY

1. Press the platform centre and remove your foot.
2. Press the Cutton.
3. While the user number is flashing, select a user number by pressing the > or < buttons. Press the 🔊 button to confirm your selection.
4. The male or female symbol will flash. Press>or <to select male/female, then press the ☐ button.
5. The height (cm/‘:”) mode display will flash.

Press> button until the correct symbol is flashing, then press the Ⓞ button.

1. The height display will flash.

Press> or < as necessary to set your height, then press the◎ button.

1. The age display will flash.
   Press> and < as necessary to set your age, then press the button.
2. The Auto User Detection display will flash A-on/A-off.

3. Press > or < to select A-on or A-off, then press the button.

4. The display will show your settings, then switch off. The memory is set.

5. Repeat procedure for a second user, or to change user details.

NOTE: To update or overwrite the memorised data, follow the same procedure, making changes as required.

Auto User Detection off:

1. Position scale on a firm flat surface.

2. Press the platform centre and remove your foot.

3. Press the 📄 button.

4. Whilst the user number is flashing select your user number by pressing the >or buttons. Your settings will be displayed.

5. Wait until the user number stops flashing. Zero will be displayed.

6. When zero is displayed, step onto the platform and stand still.

7. After 2-3 seconds your weight, weight difference, BMI, BMI difference will be displayed.

8. The scale will turn off.

Auto User Detection on:

1. Step on and stand very still while the scale computes your weight.

2. Step off. Your weight will be displayed for a few seconds.

3. If the weight reading is within +/-2.5kg of a previous weight reading the scale will show the user number MEM1 - MEM8.

4. If the user number is correct wait and after 2-3 seconds your weight, weight difference, BMI and BMI difference will be displayed.

5. If the user number is incorrect, while the user number is flashing, select a user number by pressing the >or buttons. Press button to confirm your selection.

NOTE: Select MEM0 for a guest user. The weight reading will not be saved.

WHAT DOES MY BMI VALUE MEAN? Body Mass Index (BMI) is an index of weight-for-height that is commonly used to classify underweight, overweight and obesity in adults. This scale calculates your BMI value for you. The BMI categories shown in the chart and table below are recognised by the WHO (World Health Organisation) and can be used to interpret your BMI value.

Your BMI category can be identified using the table below.

BMI Category BMI Value Meaning Health Risk Based Solely On BMI

< 18.5 Underweight Moderate
18.6-24.9 Normal Low
25-29.9 Overweight Moderate
30+ Obese		High

IMPORTANT: If the chart/table shows that you are outside of a 'normal' healthy weight range, consult your doctor before taking any action. BMI classifications are for adults (age 20+ years) only.

QUESTIONS & ANSWERS For a full list of MiBody frequently asked questions please visit www.mibody.co.uk/help or click "About" from the "Settings" page of the MiBody App.

TECHNICAL SPECIFICATION

80 cm - 220 cm

Male/Female

2'7" - 7'2"

8 user memory

6 - 100 years

WARNING INDICATORS

0-Ld Weight exceeds maximum capacity.

LO Replace battery.

ERR Unstable weight. Stand still.

E1 Pairing failed

ADVICE FOR USE AND CARE Always weigh yourself on the same scale placed on the same floor surface. Do not compare weight readings from one scale to another as some differences will exist due to manufacturing tolerances • Placing your scale on a hard, even floor will ensure the greatest accuracy and repeatability • Weigh yourself at the same time each day, before meals and without footwear. First thing in the morning is a good time • Your scale rounds up or down to the nearest increment. If you weigh yourself twice and get two different readings, your weight lies between the two • Clean your scale with a damp cloth. Do not use chemical cleaning agents • Do not allow your scale to become saturated with water as this can damage the electronics • Treat your scale with care - it is a precision instrument. Do not drop it or jump on it • Caution: the platform may become slippery when wet.

TROUBLESHOOTING GUIDE If you experience any difficulty in the use of your scale: Check the battery is correctly fitted. Check that you have selected your preference of stones/pounds, kilograms or pounds. Check that the scale is on a flat, level floor and not touching against a wall. Repeat the 'Initialisation' procedure every time the scale is moved. If when you use the scale there is no display at all or if 'LO' is displayed - try a new battery. If 'O-Ld' is displayed the scale has been overloaded.

WEEE EXPLANATION This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

BATTERY DIRECTIVE This symbol indicates that batteries must not be disposed of in the domestic waste as they contain substances which can be damaging to the environment and health. Please dispose of batteries in designated collection points.

GUARANTEE This product is intended for domestic use only. Salter will repair or replace the product, or any part of this product, (excluding batteries) free of charge if within 15 years of the date of purchase. It can be shown to have failed through defective workmanship or materials. This guarantee covers working parts that affect the function of the product. It does not cover cosmetic deterioration caused by fair wear and tear or damage caused by accident or misuse. Salter shall not be responsible for any type of incidental, consequential or special damages. Opening or taking apart the product or its components will void the guarantee. Claims under guarantee must be supported by proof of purchase and be returned carriage paid to Salter (or local Salter appointed agent if outside the UK). Care should be taken in packing the product so that it is not damaged while in transit. This undertaking is in addition to a consumer's statutory rights and does not affect those rights in any way. For UK Sales and Service contact HoMedics Group Ltd, HoMedics House, Somerhill Business Park, Five Oak Green Road, Tonbridge, Kent TN11 OGP, UK. Helpline Tel No: [phone]. For Ireland, please contact Petra Brand Masters, Unit J4 Maynooth Business Campus, Maynooth, Co. Kildare, Ireland. Tel +00 353 (0) 1 6510660. e-mail [e-mail].

www.salterhousewares.com/servicecentres

D F

WAARSCHUWINGSWEERGAVE

HODNOTY HMOTNOSTI A BMI

DECLARATION OF CONFORMITY

Hereby, HoMedics Group Ltd, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be obtained from HoMedics Group Ltd

Address: HoMedics Group Ltd, HoMedics House, Somerhill Business Park, Five Oak Green Road, Tonbridge, Kent, TN11 0GP, UK. Email: [e-mail]

GB ELECTROMAGNETIC COMPATIBILITY

This product is intended for domestic use.

ADVICE TO THE USER This product is a sensitive electronic instrument and as such may temporarily be affected by Radio Transmitting Devices being used in close proximity to it (such as Mobile Phones, Walkie Talkies, CB Radios, Radio Model Controllers, and some Microwave Ovens, etc.) Additionally, extreme levels of Electrostatic Interference may cause this product to temporarily malfunction. In such case it may be necessary to remove and re-install the battery to re-establish normal working. If the problem persists then contact your local agent.

F COMPATIBILITE ELECTROMAGNETIQUE