Spot H6 ST IX A/60 - Range hood ELICA - Free user manual and instructions
Find the device manual for free Spot H6 ST IX A/60 ELICA in PDF.
| Product type | Decorative hood |
| Brand | Elica |
| Model | Spot H6 ST IX A/60 |
| Dimensions (L x D x H) | 60 x 50 x 40 cm |
| Net weight | 12 kg |
| Power supply | 230 V ~ 50 Hz |
| Motor power | 150 W |
| Maximum airflow | 600 m³/h |
| Noise level (max) | 50 dB(A) |
| Control type | Touch electronic |
| Lighting | Integrated LED |
| Grease filter | Washable aluminum filter |
| Number of speeds | 3 + intensive function |
| Energy class | A |
| Evacuation mode | External evacuation or recirculation |
| Air outlet diameter | 150 mm |
| Recommended mounting height | 65-75 cm (electric cooktop) |
| Maintenance and cleaning | Clean the filter and exterior surfaces regularly with a soft cloth and mild detergent |
| Safety | Automatic shut-off in case of overheating (estimation) |
| Repairability | Repairability index not communicated; spare parts available from after-sales service |
Frequently Asked Questions - Spot H6 ST IX A/60 ELICA
User questions about Spot H6 ST IX A/60 ELICA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Range hood in PDF format for free! Find your manual Spot H6 ST IX A/60 - ELICA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Spot H6 ST IX A/60 by ELICA.
USER MANUAL Spot H6 ST IX A/60 ELICA
EN - Instruction on mounting and use
Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is declined.
The hood can look different to that illustrated in the drawings in this booklet. The instructions for use, maintenance and installation, however, remain the same.
! It is important to conserve this booklet for consultation at any moment. In the case of sale, cession or move, make sure it is together with the product. ! Read the instructions carefully: there is important information about installation, use and safety. ! Do not carry out electrical or mechanical variations on the product or on the discharge conduits.
Note: the elements marked with the symbol “(*)” are optional accessories supplied only with some models or elements to purchase, not supplied.
Caution
WARNING! Do not connect the appliance to the mains until the installation is fully complete.
Before any cleaning or maintenance operation, disconnect hood from the mains by removing the plug or disconnecting the mains electrical supply.
Always wear work gloves for all installation and maintenance operations.
The appliance is not intended for use by children or persons with impaired physical, sensorial or mental faculties, or if lacking in experience or knowledge, unless they are under supervision or have been trained in the use of the appliance by a person responsible for their safety.
This appliance is designed to be operated by adults, children should be monitored to ensure that they do not play with the appliance.
This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appliance.
Never use the hood without effectively mounted grating!
The hood must NEVER be used as a support surface unless specifically indicated.
The premises where the appliance is installed must be sufficiently ventilated, when the kitchen hood is used together with other gas combustion devices or other fuels.
The ducting system for this appliance must not be connected to any existing ventilation system which is being used for any other purpose such as discharging exhaust fumes from appliances burning gas or other fuels.
The flaming of foods beneath the hood itself is severely prohibited.
The use of exposed flames is detrimental to the filters and may cause a fire risk, and must therefore be avoided in all circumstances.
Any frying must be done with care in order to make sure that the oil does not overheat and ignite.
Accessible parts may become hot when used with cooking appliances.
With regards to the technical and safety measures to be adopted for fume discharging it is important to closely follow the regulations provided by the authorised authorities.
The hood must be regularly cleaned on both the inside and outside (AT LEAST ONCE A MONTH).
This must be completed in accordance with the maintenance instructions provided in this manual). Failure to follow the instructions provided in this user guide regarding the cleaning of the hood and filters will lead to the risk of fires.
Do not use or leave the hood without the lamp correctly mounted due to the possible risk of electric shocks.
We will not accept any responsibility for any faults, damage or fires caused to the appliance as a result of the non-observance of the instructions included in this manual.
This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The symbol ■ on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal.
Use
The hood is designed to be used either for exhausting or filter version.
Ducting version
In this case the fumes are conveyed outside by means of a special pipe connected with the connection ring located on top of the hood.
Attention! The exhausting pipe is not supplied and must be purchased apart.
Diameter of the exhausting pipe must be equal to that of the connection ring.
In the horizontal runs the exhausting pipe must be slightly slanted (about 10° ) and directed upwards to vent the air easily from the room to the outside.
Attention! If the hood is supplied with active charcoal filter, then it must be removed.
Connect the hood and discharge holes on the walls with a diameter equivalent to the air outlet (connection flange).
Using the tubes and discharge holes on walls with smaller dimensions will cause a diminution of the suction performance and a drastic increase in noise.
Any responsibility in the matter is therefore declined.
! Use a duct of the minimum indispensable length. ! Use a duct with as few elbows as possible (maximum elbow angle: 90°). ! Avoid drastic changes in the duct cross-section. ! Use a duct with an as smooth as possible inside. ! The duct must be made of certified material.
Filter version
One active charcoal filter is needed for this and can be obtained from your usual retailer.
The filter removes the grease and smells from the extracted air before sending it back into the room through the upper outlet grid.
The models with no suction motor only operate in ducting mode, and must be connected to an external suction device (not supplied).
The connecting instructions are supplied with the peripheral suction unit.
Installation
The minimum distance between the supporting surface for the cooking equipment on the hob and the lowest part of the range hood must be not less than 50cm from electric cookers and 65cm from gas or mixed cookers.
If the instructions for installation for the gas hob specify a greater distance, this must be adhered to.
Electrical connection
The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area. If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area apply a double poled switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over-current category III, in accordance with installation instructions.
Warning! Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the mains cable is correctly assembled.
The hood is provided with a special power cable; if the cable is damaged, request a new one from Technical Service.
Mounting
Expansion wall plugs are provided to secure the hood to most types of walls/ceilings. However, a qualified technician must verify suitability of the materials in accordance with the type of wall/ceiling. The wall/ceiling must be strong enough to take the weight of the hood. Do not tile, grout or silicone this appliance to the wall. Surface mounting only.
Operation
Use the high suction speed in cases of concentrated kitchen vapours. It is recommended that the cooker hood suction is switched on for 5 minutes prior to cooking and to leave in operation during cooking and for another 15 minutes approximately after terminating cooking.
Model with button panel
DCBAE
A. on/off light switch B. on/off aspiration switch and minimum power selection B+C. medium power selection aspiration switch B+D. maximum power selection aspiration switch E. operating gauge (foreseen in the model with round buttons)
a. on/off light switch b. off aspiration switch c. minimum power selection aspiration switch d. medium power selection aspiration switch e. maximum power selection aspiration switch
a. operating gauge. b. on/off light switch c. off aspiration switch d. minimum power selection aspiration switch e. medium power selection aspiration switch f. maximum power selection aspiration switch
a. ON/OFF light switch b. Speed 1/OFF switch c. 2-speed selection d. 3-speed selection
Functioning - Model with display
1 ON/OFF motor
Pressing the button, the hood turns on at speed 1.
Pressing the button during functioning, the hood turns OFF.
2 Speed Increase
Pressing the button the hood passes from the OFF state to speed 1.
Pressing the button (hood in ON state) the motor speed is increased from speed 1 to intensive.
To each speed corresponds the ignition of the respective led.
Speed 1:1
Speed 2:2
Speed 3:3
Intensive Speed: 4 (flashing)
The intensive speed is timed. The standard timing is 5', at the end of which the hood positions itself to speed 2.
To deactivate the function before the time expires press key 2, the hood positions itself to speed 1, pressing key 1 the hood will turn off.
3 ON/OFF lights
4 Speed timing
5 Function state indicator
Speed Timing
The timing of the speed is enabled by pressing key 4, once the timing expires the hood turns off.
The timing is subdivided as follows:
Speed 1 - 20 minutes (1 fixed, flashing point)
Speed 2 - 15 minutes (2 fixed, flashing point)
Speed 3 - 10 minutes (3 fixed, flashing point)
Intensive Speed - 5 minutes (4 fixed, flashing point)
During time-running, if key 1 or 4 is pressed, the hood turns off; if key 2 is pressed, the hood stops time-running and sets to the selected speed.
Grease filter signalling
The grease filter is signalled by the display with number 1 flashing after 80 hours of use.
This means that the grease filter needs to be washed.
The signalling is visible with the hood in ON state.
To eliminate the grease filter signalling, press key "1" for more than 3 seconds, until it turns off.
The signalling can be eliminated with the hood in ON state.
Carbon filter signalling (only for filtering version)
The carbon filter is signalled by the display with number 2 flashing after 320 hours of use.
This means that the grease filter installed must be replaced.
The signalling is visible with the hood in ON state.
To eliminate the carbon filter signalling, press key "1" for more than 3 seconds, until it turns off.
The signalling can be eliminated with the hood in ON state.
In case both filters are signalled at the same time, numbers 1 and 2 flash on the display alternately.
The signalling can be reset by carrying out the above-described procedure twice.
First it resets the grease filter signalling, then the carbon filter signalling.
In the standard mode the carbon filter signalling is not active. In case the filtering version hood is used, it is necessary to enable the carbon filter signalling.
Activation of carbon filter signalling:
Set the hood to OFF and keep keys "2" and "3" pressed contemporaneously for 3 seconds.
Numbers 1 and 2 flash alternately for 2 seconds.
Deactivation of carbon filter signalling:
Set the hood to OFF and keep keys "2" and "3" pressed simultaneously for 3 seconds.
Number 1 flashes for 2 seconds.
Temperature Alarm
The hood is equipped with a temperature sensor which activates the motor at speed 3 in case the temperature in the display zone is too high.
The alarm condition is indicated by the display with the letter "t" flashing.
This condition remains as such until the temperature falls below the alarm threshold.
This mode can be quit by pressing key "2".
Every 30 seconds the sensor checks the ambient temperature of the display zone.
Display Symbols
| Symbol | State |
| 1 | Speed 1 |
| 2 | Speed 2 |
| 3 | Speed 3 |
 | Speed 4 (intense) |
 | Speed 1 - 20 minutes |
 | Speed 2 - 15 minutes |
 | Speed 3 - 10 minutes |
 | Intensive Speed - 5 minutes |
 | Grease filter maintenance |
 | Carbon filter maintenance |
 | Grease filter and carbon filter maintenance |
 | Temperature Alarm |
Maintenance
ATTENTION! Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the connector and removing the connector fuse.
Or if the appliance has been connected through a plug and socket, then the plug must be removed from the socket.
Cleaning
The cooker hood should be cleaned regularly (at least with the same frequency with which you carry out maintenance of the fat filters) internally and externally. Clean using the cloth dampened with neutral liquid detergent. Do not use abrasive products. DO NOT USE ALCOHOL!
WARNING: Failure to carry out the basic cleaning recommendations of the cooker hood and replacement of the filters may cause fire risks.
Therefore, we recommend observing these instructions.
The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations.
Grease filter
Fig. 11-28
Traps cooking grease particles.
This must be cleaned once a month using non aggressive detergents, either by hand or in the dishwasher, which must be set to a low temperature and a short cycle. When washed in a dishwasher, the grease filter may discolour slightly, but this does not affect its filtering capacity.
To remove the grease filter, pull the spring release handle.
Charcoal filter (filter version only)
Fig. 27
It absorbs unpleasant odours caused by cooking.
The activated charcoal filter can be one of these types:
- Washable activated charcoal filter.
• NON-washable activated charcoal filter.
Washable activated charcoal filter
The charcoal filter can be washed once every two months using hot water and a suitable detergent, or in a dishwasher at 65°C (if the dishwasher is used, select the full cycle function and leave dishes out).
Eliminate excess water without damaging the filter, then remove the mattress located inside the plastic frame and put it in the oven for 10 minutes at 100°C to dry completely. Replace the mattress every 3 years and when the cloth is damaged.
Non-washable activated charcoal filter
The saturation of the activated charcoal occurs after more or less prolonged use, depending on the type of cooking and the regularity of cleaning of the grease filter.
In any case it is necessary to replace the cartridge at least every four months.
The carbon filter may NOT be washed or regenerated.
Assembly
Hook the charcoal filter at the back on the metal tongue of the hood first, then on the front with the two knobs.
Disassembly
Remove the charcoal filter by turning the knobs fixing it to the hood by 90°.
Replacing lamps
Fig. 29
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they are cooled down.
Model with halogen light bulbs.
- Using a flat head screwdriver or equivalent tool, carefully pry loose the light cover.
- Remove the damaged light and replace with a new 12 Volt, 20 Watt (Maximum) halogen light made for a G-4 base SUITABLE FOR USE IN OPEN LUMINAIRES. Follow package directions and do not touch new light with bare hands.
- Reinstall the light cover. (it will snap shut).
Model with incandescent light bulbs:
- Remove the grease filters.
- Replace faulty bulbs, always using new bulbs of max. 40 W (E14).
- Refit the grease filters.
If the lights do not work, make sure that the lamps are fitted properly into their housings before you call for technical assistance.
Intensive speed: 4 (flashing)
DCBAE
- Waste Electrical and Electronic Equipment (WEEE).
Speed 1 - 20 minutes (1 fixed, intermittent dot)
Speed 2 - 15 minutes (2 fixed, intermittent dot)
Speed 3 - 10 minutes (3 fixed, intermittent dot)
Intensive speed - 5 minutes (4 fixed, intermittent dot)
Signal for clogged oil filter
DCBAE
- EN - INSTRUCTION ON MOUNTING AND USE
- THE HOOD CAN LOOK DIFFERENT TO THAT ILLUSTRATED IN THE DRAWINGS IN THIS BOOKLET. THE INSTRUCTIONS FOR USE, MAINTENANCE AND INSTALLATION, HOWEVER, REMAIN THE SAME
- CAUTION
- USE
- DUCTING VERSION
- FILTER VERSION
- INSTALLATION
- ELECTRICAL CONNECTION
- MOUNTING
- OPERATION
- MODEL WITH BUTTON PANEL
- DCBAE
- ON/OFF MOTOR
- SPEED INCREASE
- ON/OFF LIGHTS
- SPEED TIMING
- FUNCTION STATE INDICATOR
- GREASE FILTER SIGNALLING
- CARBON FILTER SIGNALLING (ONLY FOR FILTERING VERSION)
- ACTIVATION OF CARBON FILTER SIGNALLING
- DEACTIVATION OF CARBON FILTER SIGNALLING
- TEMPERATURE ALARM
- MAINTENANCE
- CLEANING
- GREASE FILTER
- FIG
- CHARCOAL FILTER (FILTER VERSION ONLY)
- WASHABLE ACTIVATED CHARCOAL FILTER
- NON-WASHABLE ACTIVATED CHARCOAL FILTER
- ASSEMBLY
- DISASSEMBLY
- REPLACING LAMPS
- MODEL WITH HALOGEN LIGHT BULBS
- MODEL WITH INCANDESCENT LIGHT BULBS
- SIGNAL FOR CLOGGED OIL FILTER
Brand : ELICA
Model : Spot H6 ST IX A/60
Category : Range hood