SWV3471W - Computer Cable PHILIPS - Free user manual and instructions

Product type	Computer cable
Brand	Philips
Model	SWV3471W
Length	1.5 m
Connector type	HDMI male to HDMI male (version 2.0)
Conductor material	Oxygen-free copper (OFC)
Shielding	Triple shielding (braid, foil, drain)
Maximum data rate	18 Gbit/s
Maximum resolution	4K at 60 Hz
HDCP compatibility	HDCP 2.2
Supported functions	CEC, ARC, HDMI Ethernet
Plug & Play	Yes
Weight	50 g
Cable diameter	6 mm
Operating temperature	-20 °C to 60 °C
Warranty	2 years
Maintenance	Clean with a soft dry cloth
Safety instructions	Avoid excessive humidity and extreme temperatures
Repairability	Not repairable - replace if defective

Frequently Asked Questions - SWV3471W PHILIPS

Which devices are compatible with this HDMI cable?

This HDMI cable is compatible with any device equipped with a standard HDMI port: televisions, monitors, projectors, game consoles, Blu-ray players, etc. It supports HDCP 2.2 and CEC standards.

Does this cable support 4K?

Yes, it supports 4K at 60 Hz resolution thanks to its 18 Gbit/s bandwidth (HDMI 2.0).

Is the cable shielded against interference?

Yes, it features triple shielding (braid, foil, and drain wire) to minimize electromagnetic interference.

What is the length of this cable?

The length is 1.5 meters (150 cm).

Can I use this cable with a PS5 or Xbox Series X console?

Yes, it is compatible with modern game consoles. However, for 4K at 120 Hz, an HDMI 2.1 cable is recommended. This cable is HDMI 2.0 and limits to 60 Hz at 4K.

How to clean this cable?

Use a soft dry cloth to wipe the connectors. Avoid solvents or excessive moisture.

Is this cable compatible with computer monitors?

Yes, it works with all computer monitors and screens with an HDMI input.

Is there a difference between gold-plated connectors and others?

Gold-plated connectors offer better conductivity and resist corrosion, ensuring reliable transmission.

What to do if the cable does not work?

Check the connections, try another HDMI port, and test with another device. If the problem persists, the cable is likely defective and should be replaced.

Does this cable support audio return (ARC)?

Yes, it supports ARC (Audio Return Channel) and Ethernet over HDMI.

USER MANUAL SWV3471W PHILIPS

Exterior view of a modern flat-screen toaster with a digital display and control buttons (no text or symbols on the device itself)

Line drawing of various household appliances including a blender, blender, blender, and water dispenser (no text or labels)

A Warming rack
BStop button
©Toasting lever
D Display
E Browning setting indication
F Crumb tray
G Browning controls (+ and -)
H Mode button (to select different functions)

1 Normal toasting
2 Defrosting and toasting
3 One side toasting (ideal for bagels and baguettes)
4 Reheating
5 Heating up rolls and croissants

Warming rack lever

Important

Read these instructions for use carefully before using the appliance and save them for future reference.

Check if the voltage indicated on the bottom of the appliance corresponds to the local mains voltage before you connect the appliance.
▶ Only connect the appliance to an earthed wall socket.
If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
Do not immerse the appliance or the mains cord in water or any other liquid.
▶ Always unplug the appliance after use.
- Keep the appliance out of the reach of children.
Do not let the mains cord hang over the edge of the table or worktop on which the appliance is standing and keep the cord away from hot surfaces.
Do not let the appliance operate unattended. Do not operate it under or near curtains or other flammable materials or under wall cabinets, as bread may burn.
Avoid touching the metal parts on top of the toaster, as they get very hot during toasting. Only touch the controls.
The toaster is intended for household use only and may only be used indoors.
To avoid the risk of fire, frequently remove crumbs from the crumb tray. Make sure the crumb tray is correctly placed.
Immediately unplug the toaster if fire or smoke is observed.
If a slice of bread gets stuck inside the toaster, unplug the appliance and allow it to cool down before trying to remove the bread. Do not use a knife or a sharp tool, as these may cause damage to the heating elements.
This appliance is only intended for household use. It is not intended for commercial or industrial use.
▶ Oversized foods and metal foil packages must not be inserted into the toaster, as this may cause fire or electric shock.
Do not place the toaster on a hot surface.
The warming rack is only meant for warming up rolls or croissants. Do not put any other ingredients on the warming rack, as this may lead to a hazardous situation.

Before first use

Remove any stickers and wipe the body of the toaster with a damp cloth.
2 Before using the appliance for the first time, we advise you to let the appliance complete a few toasting cycles without slices of bread on the highest browning setting in a properly ventilated room.
This will burn off any dust that may have accumulated on the heating elements and will prevent unpleasant smells when toasting bread.

Using the appliance

Never let the toaster operate unattended.

You can adjust the length of the cord by winding part of it round the brackets in the base of the appliance (fig. 2).
Put the appliance on a stable and flat surface, away from curtains and other combustible materials.
2 Put the plug in the wall socket.

Toasting bread

I Put one or two slices of bread in the toaster (fig. 3).
2 Select the ☐ mode by pressing the mode button until ☐ appears on the display. Depending on the previously selected mode, you have to press the mode button once or several times (fig. 4).
3 Select the desired browning setting (fig. 5).
Select a low setting for lightly toasted bread and a high setting for a dark browning result.
- Press the - button once or several times to select a lower setting for lighter toast.
- Press the + button once or several times to select a higher setting for darker toast.
The selected setting is shown on the display.

4 Push the toasting lever down to switch the appliance on (fig. 6).

• The stop button lights up.
• The toasting lever will only stay down if the appliance has been connected to the mains.
• The remaining toasting time appears on the display and starts blinking.

The top part of the toaster will get hot during toasting. Be careful not to touch it.

▶ Monitoring the toasting process (fig. 7).

The display shows the toasting time and starts counting down. The last minute is displayed in seconds.

5 Adjusting the browning setting during toasting (fig. 8).

When the toaster is operating you can press the + button to get darker toast or the - button to get lighter toast.

The toasting time and browning setting are adjusted on the display.

Note: when you select a lower setting for lighter toast, the toast may pop up immediately because the desired browning level has already been reached.

When the toast is ready, you will hear an audible signal, the display blinks a few times and the bread pops up.

ENGLISH8

• You can stop the toasting process and pop the bread up at any time by pressing the STOP button on top of the toaster (fig. 9).
  To remove smaller items, you can move the toasting lever upwards a little further (fig. 10).
  If bread gets stuck inside the toaster, remove the plug from the wall socket, let the appliance cool down completely and carefully remove the bread from the toaster. Do not use a knife or another sharp metal tool to do this and do not touch the metal internal parts of the toaster.

Toasting frozen bread

I Select the Ⓜ mode by pressing the mode button (fig. 11).
Depending on the previously selected mode, you have to press the mode button once or several times.
2 Select the desired browning setting and push the toasting lever down to switch the appliance on (see section 'Toasting bread').

Reheating toasted bread

1 Select the ☑ mode by pressing the mode button (fig. 12). Depending on the previously selected mode, you have to press the mode button once or several times.

2 Push the toasting lever down to switch the appliance on.

Note: you cannot adjust the browning setting, because this mode has a preset time for an optimal result.

Toasting one side only

Ideal for toasting bagels and baguettes.

1 Half the bagel or baguette lengthwise and shorten the baguette to a length of max. 13 cm.
2 Put the bread in the toaster with the side to be toasted facing the front of the toaster (fig. 13).
3 Select the ☐ mode by pressing the mode button (fig. 14).
Depending on the previously selected mode, you have to press the mode button once or several times.
4 Select the desired browning setting and push the toasting lever down to switch the appliance on (see section 'Toasting bread').

Heating up rolls and croissants

1 Push the warming rack lever down to unfold the warming rack (fig. 15). Never put the rolls to be heated up directly on top of the toaster without having unfolded the warming rack to avoid damaging the toaster.

2 Put the rolls or croissants on top of the warming rack.

Do not heat up more than 2 items at a time.

3 Select the ⏻ mode by pressing the mode button (fig. 16).

Depending on the previously selected mode, you have to press the mode button once or several times.

4 Push the toasting lever down to switch the appliance on.

Note: you cannot adjust the browning setting, because this mode has a preset time for an optimal result.
If you want even warmer rolls or croissants, turn them over and push the toasting lever down again.

Sleep mode

If the toaster has not been used for 5 minutes, it will go into sleep mode automatically. You can reactivate the toaster by pressing any button.

Cleaning

I Unplug the appliance.
2 Let the appliance cool down.
3 Clean the appliance with a damp cloth. Do not use abrasive cleaning agents. Clean the display with a dry cloth without exerting any pressure.

Never immerse the appliance in water.

4 Remove crumbs from the appliance by sliding the crumb tray out of the appliance (fig. 17). Do not hold the appliance upside down and do not shake it to remove the crumbs.

Environment

Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment (fig. 18).

Guarantee & service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.

Troubleshooting

If you are unable to solve the problem by means of this troubleshooting guide, contact the Customer Care Centre in your country (see chapter 'Guarantee & service').

Problem	Solution
1.The toaster does not work.	Check if the plug has been properly inserted into the wall socket.
2. Bread gets stuck in the appliance.	Unplug the appliance and let it cool down. Carefully remove the slice or slices from the toaster.Take care not to damage the heating elements while removing the slice or slices of bread. Never use a metal object for this purpose.
3.The toast is too dark/too light.	Check the browning setting selected for toasting. Select a lower setting next time if your toast is too dark and a higher setting if your toast is too light.
4. Smoke comes out of the toaster.	You have chosen a too high setting for the type of bread inserted. Push the stop button to stop the toasting process.
5.The mains cord is damaged.	If the mains cord of this appliance is damaged, it must always be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
6. One side of the bread has not been toasted.	You have selected the one-side toasting mode.That is why only one side of the bread has been toasted.To toast the other side as well, put the bread in the slot with the untoasted side facing the front of the toaster and follow the instructions in 'Toasting one side only'.
7. I cannot change the browning level when I use the warming mode or reheat mode.	This is normal, for the toaster has a fixed temperature setting for warming up rolls and croissants and for reheating bread to ensure an optimal end result.
8. Only one side of my roll or croissant is warm.	Turn your roll or croissant over and warm it up again. Follow the instructions in 'Heating up rolls and croissants'.
9.The display of the toaster continues to blink or burn.	Remove the plug from the wall socket and then reinsert it.
10. I want to make toasted sandwiches (e.g. with cheese).	This toaster is not suitable for making toasted sandwiches.

5 Heating up rolls and croissants