PCD-498MP - Cd player/recorder ROADSTAR - Free user manual and instructions

Product type	CD player/recorder with FM radio tuner
Brand	Roadstar
Model	PCD-498MP
Dimensions (W x H x D)	Approx. 430 x 100 x 280 mm
Weight	Approx. 3.0 kg
Power supply	220-240 V ~ 50 Hz
Compatible CD formats	CD, CD-R, CD-RW, MP3-CD
Recording function	Recording on CD-R and CD-RW from CD player or radio
Radio tuner	FM stereo with 30 presets
Output power	2 x 5 W RMS
Auxiliary input	3.5 mm jack (AUX IN)
Headphone output	3.5 mm jack
Display	Backlit LCD screen
Remote control	Included (battery not supplied)
Maintenance and cleaning	Clean with a soft, dry cloth. Do not use solvents.
Safety	Do not expose to moisture, shocks, or excessive heat.
Spare parts and repairability	For repairs, contact an authorized Roadstar service center. Parts available via manufacturer.
Power consumption	Approx. 20 W in operation, < 1 W standby
Color	Black / Silver

Frequently Asked Questions - PCD-498MP ROADSTAR

How to record an audio CD onto a blank CD-R?

Insert the source CD into the playback compartment and a blank CD-R into the recording compartment. Press the REC button to start recording. Ensure the blank CD is properly formatted (Finalize after recording).

How to tune the FM radio?

Press the SOURCE button to select TUNER mode. Use the + and - buttons to search for stations. You can store a station by pressing MEM then a numeric key (0-9).

What to do if the device does not read my CDs?

Check that the CD is not scratched or dirty. Clean it with a soft cloth from the center outwards. Make sure the format is compatible (CD, CD-R, CD-RW, MP3). If the problem persists, try another CD.

Can I connect a smartphone to this device?

Yes, using the AUX IN auxiliary input (3.5 mm jack). Connect your smartphone with a suitable cable and select the AUX source.

How to finalize a recorded CD so it can be read on other players?

After recording, press the FINALIZE button (or follow on-screen instructions). This operation is irreversible: you will not be able to add more tracks.

The device does not turn on, what to do?

Check that the power cord is properly connected and that the outlet is working. Ensure the power switch on the back is set to ON.

How to use the repeat function?

In playback mode, press the REPEAT button several times to choose between repeating a single track, the entire disc, or shuffle (SHUFFLE).

What type of battery does the remote control use?

The remote uses a CR2025 button cell battery (not supplied). Open the battery compartment on the back of the remote and insert it respecting polarity.

How to clean the CD player?

Use a special cleaning CD or a soft lint-free cloth. Never use liquid directly on the lens. Avoid chemicals.

Where to find spare parts or get the device repaired?

Contact Roadstar after-sales service via their official website or an authorized service center. For parts, specify the model PCD-498MP.

USER MANUAL PCD-498MP ROADSTAR

- Your new unit was manufactured and assembled under strict ROADSTAR quality control. Thank-you for purchasing our product for your music enjoyment. Before operating the unit, please read this instruction manual carefully. Keep it also handy for further future references.

Use with regular batteries

1. Open the battery compartment door, located on the bottom of the unit, by sliding the door and lift it up. (Do not remove the battery door).
2. Insert 2 x 1.5V /UM-3/AA size alkaline batteries, following the correct polarity, as indicated in the battery compartment.
3. Close the battery compartment door. If the symbol "LOW BATTERY" appears in the display, batteries are weak and ought to be replaced.

Use with AC/DC adaptor (included)

1. Insert the DC plug, at the end of the AC/DC adaptor cord, into the DC 5 V INPUT socket (12) located on the back of the unit.
2. Connect the AC/DC adaptor into a 100-240V \~ 50-60 Hz AC power outlet.

Notes:

• If the AC adaptor is connected when regular batteries are installed, the power supply automatically switches to the AC power source.
• Use only the supplied AC/DC adaptor. Using other types of adaptor may damage the unit.
• Make sure that the AC/DC adaptor matches with your household voltage before connecting it into the wall outlet.
• When not using AC power, disconnect the AC/DC adaptor from the wall outlet.
• Do not touch the AC/DC adaptor with wet hands.

Use rechargeable batteries

1. Disconnect the AC/DC adaptor from the wall outlet if it is being connected to the unit.
2. Open the battery compartment door as mentioned previously.
3. Insert 2 recommended rechargeable batteries, following the correct polarity as indicated in the battery compartment.
4. Close the battery compartment door.

5. Move the RECHARGE SWITCH (16) to ON to start recharging function. The red CHARGE indicator (17) will light up.

6. After 15 hours of charging set the RECHARGE SWITCH (16) to OFF.

Cautions:

• DO NOT mix the rechargeable (Nickel-Cadmium) and regular(Carbon-zinc) batteries.
• DO NOT charge continuously for 24 hours or more, otherwise it will deteriorate the performance of the rechargeable batteries.
• DO NOT try to recharge normal (not rechargeable) batteries. They can explode! Notes:
• If the rechargeable batteries are being charged for the first time, it will take approximately 15 hours to be fully charged.
• If the operating time decreases drastically even when the rechargeable batteries are properly recharged, purchase a new set of rechargeable batteries.

EARPHONES

Connect the stereo earphones (included) to the Phones jack (11).

CD/MP3 PLAYBACK

1. Connect the earphones (included) or optional headphones into the Phones jack.
2. Press the Door Open button (15) to open the CD compartment door.
3. Insert a disc with the label side facing up.
4. Close the CD compartment door until a click is heard.
5. Set the VOLUME control (8) to minimum.
6. Press the PLAY/PAUSE button (2), the unit power will turn on automatically and show the number of the tracks. The total number of albums and tracks, and MP3 appear on the display: Playback starts. During playback, the actual album number, track and the elapsed time appear. CD + MP3
7. Adjust the VOLUME control to your desired listening level.
8. To stop playback temporarily, press the PLAY/PAUSE button (2) once. The elapsed time will flash and track number compare on the display. Press the PLAY/PAUSE button again to resume playback.
9. To stop playback, press the STOP (3) button once.
10. To turn the unit off, press the STOP (3) twice.

Notes:

• When the CD door is accidentally opened during playback, "Open" will appear on the display.
• Wait until the disc is fully stopped before pressing the OPEN (15) button.

LOCATING A PARTICULAR TRACK OR POINT OF THE TRACK

1. Press the BACKWARD (4) button once to go back to the beginning of the current track.
2. Press the BACKWARD button repeatedly to go back to previous tracks.
3. Press the FORWARD (5) button repeatedly to go to next tracks. 4. Press and hold either FORWARD or BACKWARD button to search backwards or forwards, at high speed, a particular point of track. Low level audio will be heard during the search process to assist in locating the correct point in the track.

REPEAT PLAYBACK

1. Press the PLAY/PAUSE button (2).
2. To repeat the same track, press the MODE button (7) once during PLAYBACK. "REP 1" will appear on the display. CD will start single track repeat playback until STOP button (3) is pressed. Press the MODE button (7) 5 times to cancel single repeat. The 'REP 1' indicator disappears from the display.
3. To repeat the entire ALBUM, press the MODE button (7) twice. "REP ALL" will appear on the display. Press the MODE button (7) 3 times to cancel all Album repeat. The 'REP ALL' indicator disappears from the display.
4. To repeat the entire MP3 disc, press the MODE (7) button (6) three times. "REP DIR" will appear on the display. Press the MODE button (7) 3 times to cancel all disc repeat. The "REP DIR" indicator disappears from the display.

INTRO PLAY

1. Press the PLAY/PAUSE button (2).
2. Press the MODE button (7) 4 times to enter the Intro mode, 'INT' appears on the display.
3. Press PLAY, the CD start play the first 10 seconds of each track of each album on the CD.
4. Press MODE button (7) twice more to cancel Intro playback and resume normal playback.
5. Power is turned off automatically after 60 seconds, when all tracks have been played.

RANDOM PLAY

1. Press the MODE button (7) 5 times to enter the Random mode. "RND" appears on the display, then the CD start playback of all tracks of all albums in Random order.
2. Press SKIP button to go to next Random track.
3. Press the MODE button 2) once more to return to the Normal Playback mode.

PROGRAM PLAY

1. Press the PLAY/PAUSE button (2) and after 8 seconds the STOP button (3).
2. Press the PROG button (6), the following will appear on the display: (00 000 P-01) and the Album no. will flash.
3. Press the SKIP Forward and Backward (10,7) buttons to select the desired Album to be programmed.
4. Press the PROG button (6) once to enter the Album into memory. The Album number will stop flashing and the track number will start flashing.
5. Press the SKIP Forward and Backward (10,7) buttons to select the desired track to be programmed.
6. Press the PROG button (6) to select the desired track to be programmed.
7. Repeat the steps 3 to 6 to program up to 24 tracks.
8. Press PLAY/PAUSE button (2) once to start programmed playback.
9. To cancel programmed playback, press the STOP button (3) twice.

ANTI-SHOCK FUNCTION

• If in use, the player is likely to receive shocks or vibrations (i.e. whilst walking or in a moving vehicle). As soon as the PLAY/PAUSE button is pressed, the ASP function is automatically activated to allow uninterrupted playback.
• Should the player receive shocks for more than 45 seconds continuously in CD playback or 100 seconds in MP3 playback, the sound can mute for a very short while and will resume once the player has stabilised from the shock.
• When using the Anti-shock function, the disc will rotate faster than normal playback and memory is active. Only use the ANTI-SHOCK function when necessary to preserve the battery life.
• The Anti-shock function will not correct the errors arising from the use of defective scratched or dirty discs.

SPECIFICATIONS

DC: 5V (Adapter)

Batteries: 2 x AA

Specifications and the design are subject to possible modifications without notice due to improvement.

WARNINGS

The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.
The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of “dangerous voltage” inside the unit.
To reduce the risk of electric shock, do not remove the cover. No user serviceable parts inside the unit. Refer all servicing to qualified personnel.
This unit operates on 230V \~ 50Hz. If the unit is not used for a long period of time, remove the plug from the AC mains.
Ensure all connections are properly made before operating the unit.
This unit must not be exposed to moisture or rain.
This unit should be positioned so that it is properly ventilated. Avoid placing it, for example, close to curtains, on the carpet or in a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.

Simple line drawing of a trash bin with two crossed lines and a black bar below (no text or symbols)

CORRECT DISPOSAL OF THIS PRODUCT (Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

BEDIENUNGSELEMENTE

WIEDERHOLTE WIEDERGABE

Simple line drawing of a trash bin with no text or symbols

KORREKTE ENTSORGUNG DIESES PRODUKTS (Elektromüll)

Simple line drawing of a trash bin with no text or symbols

Simple line drawing of a trash bin with no text or symbols

Simple line drawing of a trash bin with two crossed lines and a black bar below (no text or symbols)

Roadstar Management SA, via Passeggiata 7 CH 6883 Novazzano (Switzerland)