HR5BR - Radio BLAUPUNKT - Free user manual and instructions

Brand	Blaupunkt
Model	HR5BR
Product Type	Portable Radio
Dimensions (W x H x D)	200 x 130 x 70 mm
Weight	~500 g
Power Supply	AC 100-240V 50/60Hz; 4x AA batteries (not included)
Radio Bands	FM 87.5-108 MHz, AM 530-1710 kHz
Preset Stations	20 (FM/AM)
Display	LCD with backlight
Speaker	5W mono
Headphone Jack	3.5 mm stereo
Additional Features	Sleep timer, alarm clock, digital tuning
Material	Plastic
Color	Black
Cleaning	Wipe with soft dry cloth; do not use liquid cleaners
Safety	Keep away from moisture, heat, and direct sunlight; do not open
Spare Parts / Repairability	Contact Blaupunkt customer service
Warranty	2 years
Package Contents	Radio, AC cord, user manual

Frequently Asked Questions - HR5BR BLAUPUNKT

How do I set the alarm on the HR5BR radio?

Press the Alarm button until the alarm icon flashes. Use the Tuning knob to set the hour, then press Alarm again to set minutes. Confirm with Alarm once more.

What type of batteries does the HR5BR use?

It requires 4 AA batteries (not included). Open the battery compartment at the bottom and insert them with correct polarity.

Can I listen to the HR5BR with headphones?

Yes, plug any standard 3.5mm headphones into the headphone jack on the side. The internal speaker will mute automatically.

How do I preset my favorite radio stations?

Tune to the desired station, then press and hold one of the preset buttons (1-5) for 2 seconds. To access presets, press the Preset button and then the number.

Why is the sound distorted at high volume?

This may be due to battery power being low. Replace batteries or connect the AC adapter. Also ensure the antenna is fully extended for clear reception.

How do I clean the HR5BR?

Unplug the unit and use a soft, dry cloth to wipe the exterior. Do not use any liquid cleaners or sprays, as they may damage the electronics.

Can I use the radio while it is charging?

Yes, the radio can operate on AC power while the batteries are removed or inside. Simply plug the supplied AC cord into the back.

How do I improve FM reception?

Fully extend the telescopic antenna and adjust its angle. For stronger signals, place the radio near a window or away from large metal objects.

What does the sleep timer do?

The sleep timer automatically turns off the radio after a set time. Press the Sleep button repeatedly to choose 15, 30, 45, or 60 minutes.

The display is dim; can I adjust brightness?

The backlight brightness is fixed. If it appears dim, check that the batteries are fresh or use the AC adapter for consistent brightness.

USER MANUAL HR5BR BLAUPUNKT

Enjoy it.

Home radio with clock and USB/microSD playback

Radio with USB/microSD player and clock

IMPORTANT SAFETY INSTRUCTIONS

The marking plate is located at the bottom of the apparatus.

Important Safety Instructions

Caution:

To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

Explanation of Graphical Symbols:

The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and

To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. This will assure you years of trouble free performance and listening pleasure.

Important Notes

• This safety and operating instruction should be retained for future reference. • The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom. Do not install the product in the following areas: - Places exposed to direct sunlight or close to radiators. On top of other stereo equipment that radiate too much heat. ○ Blocking ventilation or in a dusty area. - Areas where there is constant vibration. ○ Humid or moist places. • Do not place near candles or other naked flames. • Operate the product only as instructed in this manual. • Before turning on the power for the first time, make sure the power adaptor is properly connected. • Plug-in the USB stick directly or use an USB-extension cable which is not longer than 25 cm.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.

Retain Instructions - The safety and operating instructions should be kept with the product for future reference.

1. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
2. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
3. Follow instructions - All operating and user's instructions should be followed.
4. Installation - Install in accordance with the manufacturer's instructions.
5. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
6. Grounding or polarization - The product is not required to be grounded. Ensure that the plug is fully inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a plug having one blade wider than the other). This plug will fit onto the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord other than that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry safety approval appropriate to the country of use.
7. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on, kinked or pinched by items placed on or against them, paying particular attention to cords from plugs, receptacles and the point where they exit from the product.
8. Overloading - Do not overload wall outlets, extension cords, or multiple sockets, as this can result in a risk of fire or electric shock.
9. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
10. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus.
11. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
12. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
13. Cleaning - Unplug the product from the wall outlet before cleaning. Dust in the woofer may be cleaned with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the cloth. Be careful not to damage the drive units.
14. Attachments - Do not use attachments not recommended by the product manufacturer, as they may cause hazards.
15. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.

damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.

1. Moving the product - A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
2. Unused periods - The power cord of the appliance should be unplugged from the outlet during lightning storms or when the apparatus is left unused for a long period of time.
3. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
4. Please remove the power plug from the main power source or wall power source when not in use. When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
5. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
6. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating.
7. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker may be damaged when a peak level section is suddenly played.
8. The only means of completely disconnecting the product from the power supply is by removing the power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the product is in use.
9. Try to install the product near a wall socket or extension cord and shall be easily accessible.
10. The highest environmental temperature suitable for this product is 35°C.
11. ESD hints - If the product may reset or not reset to operation of control due to electrostatic discharge, just switch off and reconnect again, or move the product to another location.

28. Battery

1. The batteries must not be exposed to excessive heat such as sunshine, fire or the like.
2. The batteries should be drawn to the environmental aspects of battery disposal.
3. Battery usage CAUTION - to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:

- Install all batteries correctly, + and - as marked on the apparatus.

- Do not mix batteries (old and new or carbon and alkaline, etc.)

- Remove batteries when the unit is not used for a long time.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this is only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. The unit should not be impeded by covering the ventilation opening with items such as newspaper, tablecloths, curtains, etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
6. The apparatus must not be exposed to dripping or splashing, and objects filled with liquids, such as vases, must not be placed on the apparatus.
7. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture, or dust.
8. Do not locate this unit near any water sources, e.g., taps, bathtubs, washing machines, or swimming pools. Ensure that you place the unit on a dry, stable surface.
9. Do not place this unit close to a strong magnetic field.
10. Do not place the unit on an amplifier or receiver.
11. Do not place this unit in a damp area, as the moisture will affect the life of electric components.
12. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
13. Do not attempt to clean the unit with chemical solvents, as this might damage the finish. Wipe with a clean, dry, or slightly damp cloth.
14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord.
15. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the TV screen.
16. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from the TV set.
17. The mains plug is used as the disconnect device, the disconnect device must remain readily operable.
18. To prevent possible hearing damage, do not listen at high volume levels for long periods.

NOTICE

CE

This product complies with the radio interference requirements of the European community.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

Bluetooth™

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by us is under license. Other trademarks and trade names are those of their respective owners.

Control locations

01— Play/Pause key for play/pause and mute function operation. 02— ON/OFF key for unit turn on or off. 03— Volume knob for volume adjustment. 04— Mode key to switch the play mode between clock/USD/microSD/FM/AUX IN mode. 05— Remote control sensor window. 06— Next key. 07— Previous key.

08— AUX IN jack. 09— Reset 10— MicroSD card slot. 11— USB port. 12— DC 5V power jack. 13— Power LED indicator.

Remote control

01— Repeat button (Repeat all, random and repeat one).

03— Light button for display backlight brightness adjustment.

04— EQ selection button (only for USB/microSD card playback mode)

05— Play/Pause button.

06— Volume +.

07— Volume -.

08— FM auto scan button.

09— Mode button for play source selection.

10— Previous button.

11— Next button.

12— Digits button (0~9).

Notes:

a. Before you use the remote control, please make sure the CR2025 battery has been installed inside properly according to the polarity indication. b. Please remove the power insulation sheet before using the remote control. c. Please dispose of the exhausted battery in an environmentally friendly manner. Please refer to your local government's requirements for details. d. The best operation distance for the remote control is within 5 meters without any obstruction. Please aim the remote control at the sensor on the front panel of the unit for operation.

Unit installation and power setting

Using the supplied USB power cable, connect it to the DC adapter; and connect the other terminal of the USB cable to the micro USB DC power jack on the back panel of the unit. Then plug the DC adapter into your household power source. The red LED power indicator will light up after the power connection is successful.

Press the power button for 2 seconds on the front panel of the unit to power on/off the unit. Press the power button on the remote control to put the unit in standby or wake it up. The display will light up after power on, and then you can start other operations.

Notes:

a. The supplied USB power cable includes a universal USB connector and a micro USB connector. The universal USB connector is for DC adapter connection, and the micro USB connector is for DC power USB jack connection. b. Only the supplied power adapter or an adapter with the same rating specifications is allowed to be used for power operation. c. When you turn off the power using the power button on the front panel, the unit cannot be powered on by the remote control because the power is cut off completely. Please press the power button on the front panel to power on the unit again.

Display backlight adjustment (dimmer)

Press the "LIGHT" button on the remote control to adjust the display backlight brightness between high, middle, and low levels.

Time/sleep setting

The unit includes clock time and sleep functions. Please follow the instructions below for operation.

1. Power on the unit, and press the "MODE" button on the remote control, or press the "M" button on the front panel of the unit to switch the play mode until the clock time interface shows on the display. When using this unit for the first time, it will enter the clock time interface directly upon powering on.
2. Press and hold the "M" button on the front panel of the unit for 3 seconds until the hour digits flash on the display.
3. Then turn the volume knob to adjust the desired hour, and briefly press the "M" button to confirm the hour setting. Meanwhile, the minute digits will flash on the display.
4. Turn the volume knob to adjust the minute setting, and briefly press the "M" button to confirm the setting. Then the unit will enter the sleep time setting.
5. Turn the volume knob to adjust the sleep time between (off, 15, 30, 60, 90, 120). Then briefly press the "M" button to confirm all settings and exit the setting mode.

Notes:

a. During USB/SD/AUX/FM playing mode, press and hold the "0" digit button on the remote control to check the current time information for 3 seconds; then it will resume to the current play mode interface. b. If you have set the sleep time on this unit, the unit will power off automatically when the sleep countdown time is reached.

Alarm operation

The unit includes 2 alarms which can wake you up when the alarm time is reached. Please follow the steps below for the setting operation.

1. Press the "M" button on the front panel of the unit until it enters the clock time display interface.
2. Press and hold the Play/Pause button until the alarm bell icon flashes on the display. Turn the volume knob to switch between alarm 1 and alarm 2.
3. Briefly press the "M" button to select the alarm that you want to set up; then turn the volume knob to adjust the alarm hours.
4. Briefly press the "M" button to confirm the hour setting, and turn the volume knob to adjust the minute setting.
5. Briefly press the "M" button to confirm the minute setting, then the alarm bell icon will flash on the display.
6. Briefly press the Play/Pause button to switch the alarm between on and off. Then keep the selection. After 5 seconds, the display will exit the alarm setting mode and return to the clock time interface. The corresponding alarm bell icon will light up on the display if you selected alarm on, which means the alarm setting is successful and the alarm is now active.
7. To set up other alarm, please refer to the above step for operation.

Notes:

a. The Buzzer and FM radio are allowed to select as the alarm source. If you want to set up the FM radio as alarm source, please press the "1" digit button in 3 seconds from remote control till the "ON" show on display in FM radio mode; then the current FM radio station will set as the alarm source. To cancel the FM radio alarm source, please press the "1" digit button again till "OFF" show on display. Then the Buzzer will become the alarm source. b. When the alarm is ring up, press any button on front panel or remote control can cancel the alarm sound. c. On clock time mode, press and hold the Next button on front panel can turn off all alarm setting. d. The duration of alarm sound is 2 minutes; and the alarm will wake up again after 5 minutes if there is no further operation. There will repeat 2 times and off automatically in case of nobody in home. e. When you set up the alarm, please make sure that you have set the clock time properly. f. Please make sure the DC power is remained and connected with the unit. Otherwise, the alarm cannot wake up. Please double check the time and alarm setting after you removed the DC power. g. The alarm is workable on power off mode(display off), but DC power should remain and connect with unit properly.

FM radio operation

The unit built-in an antenna inside which allows you to listen the FM radio station. Before listen to the radio, please try to move the unit next to window in order to get better radio signal.

Power on the unit, press the "M" button on the front panel of unit or press the "MODE" button on remote control can enter to radio mode.

1. Auto tune and preset: short press the "FM SCAN" button, or press and hold "PLAY/PAUSE" button from remote control or front panel of unit in 3 seconds, the unit will scan and save the available station automatically. The unit can save up to 50 preset stations.
2. Auto scan: Press and hold the "Previous" and "Next" button on front panel of unit or remote control can auto scan the available station in upward or downward frequency. The unit will stop and play the available station automatically. Press the "SAVE" button on remote control can save the current station.
3. Get a specific station: To get a specific frequency station, you can input the frequency directly using the digit buttons on the remote control. For example, if you want to listen to the radio frequency at "104.3 MHz", you just need to key in 1-0-4-3 using the digit buttons on the remote control. Then the unit will skip and play the defined station.
4. Preset station picking up: Short press the "Previous" or "Next" button on the remote control or front panel to pick up the preset station; or input the preset station number using the digit buttons on the remote control for picking up. For example, if you want to listen to the preset station number 12, please just key in 1-2 on the remote control, then the related station will be played.

USB and microSD card playback operation

Before starting the MP3 playback function, please make sure the USB or microSD card has been inserted into the USB or microSD port on the rear panel of the unit. Also, the MP3 music has been copied and stored inside the device. The unit can support up to 32GB capacity devices.

1. Press the "MODE" or "M" button to enter the USB or microSD card playback mode. The unit will auto detect and start to play the music after showing the total number of tracks.
2. Short press the "Previous" or "Next" button to select the last or next track; press and hold the "Previous" or "Next" button to fast-forward or fast-rewind the current playing track.
3. Key in the related number using the digit buttons on the remote control to quickly pick up and play the related track.
4. Short press the "REPEAT" button on the remote control to switch the play mode between repeat all, repeat one, and random. Press and hold the "M" key on the front panel of the unit for 3 seconds to achieve the same operation.
5. To repeat a specific section of a track, press and hold the "REPEAT" button for 3 seconds until "P-A" appears on the display to select the start point. Then press and hold the "REPEAT" button for 3 seconds until "P-b" appears on the display to select the end point. The unit will then repeat the selected section. Press and hold the "REPEAT" button until "P-E" appears on the display to cancel and exit the specific repeat function.
6. During MP3 playback, short press the EQ button on the remote control to cycle through the equalizer presets: NORMAL, ROCK, POP, CLASS, JAZZ, and BASS.

Notes:

a. Using an extension cable for USB connection is not recommended, as it may affect audio signal transfer and cause noise output. b. The unit can only detect and play music when a USB or microSD card is installed.

AUX IN/MP3 Link operation

Use the supplied 3.5mm stereo-to-3.5mm audio cable to connect the AUX IN jack on the rear panel of the unit to another player (e.g., MP3 player). The unit will automatically enter AUX IN playback mode. Select and play music from your player, and the sound will be output through the radio.

Please note that the main control is on your player side. In AUX IN mode, the radio can only adjust volume and play/pause functions.

Specifications:

Power source: DC 5V/1.5A

Output power: 3 W RMS.

FM frequency: 87.5~108.0 MHz.

USB rating output: 100 mA.

Power consumption: 5.5 W

Standby power consumption: <0.7W

Factory default:

System time: 00:00

Time format: 24 hours.

Sleep: OFF.

Alarm duration: 2 minutes

Volume: 15

(The specification may be revised without prior notice)

Troubleshooting

1. The display cannot light on.

a. Please check if the DC power has been connected properly. b. Please press and hold the Power button for 3 seconds to turn the unit on. c. Please contact the service center for support in case the problem remains.

1. The radio station sounds not good.

a. Please move the unit next to a window in order to get better reception. b. Please try switching to another station for listening. c. Please contact the service center for support in case the problem remains.

1. The sound in USB or microSD card mode is not good.

a. Please double check the USB and microSD card device was inserted properly. b. Please try power off and power on the unit for playing again. c. Please contact the service center for support in case of the problem remains.

IMPORTANT SAFETY INSTRUCTIONS

FM frequency: 87.5~108.0 MHz

Rated parameters of the USB port: 100 mA

Power consumption: 5.5 W

IMPORTANT SAFETY INSTRUCTIONS

Competence Centre Audio

2N-Everpol Sp. z o.o.

ul. Puławska 403A

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

Please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.