A900 - Iron TERMOZETA - Free user manual and instructions

Product type	Steam iron
Brand	Termozeta
Model	A900
Dimensions (L x W x H)	28 x 13 x 15 cm
Weight	1.2 kg
Power supply	220-240 V, 50-60 Hz
Power	2400 W
Water tank capacity	300 ml
Steam function	Continuous steam and steam shot
Anti-calc function	Integrated anti-calc system
Auto shut-off function	Automatic shut-off when idle
Soleplate type	Ceramic soleplate
Power cord	Length 2 m, swivel
Care and cleaning	Clean the soleplate with a damp cloth, empty the tank after use
Safety	Auto shut-off, overheat protection
Spare parts	Water tank, soleplate, buttons available
Repairability	Repairability index: 8/10

Frequently Asked Questions - A900 TERMOZETA

How to fill the water tank of the Termozeta A900 iron?

Unplug the appliance, open the tank cap and pour tap or demineralized water up to the MAX mark. Do not exceed the maximum level.

How to use the steam function?

Set the desired temperature, wait for the indicator light to go out, then press the steam button. For a powerful steam shot, press twice quickly.

What to do if the iron does not heat up?

Check that the appliance is plugged in and the thermostat is set to a temperature. If the problem persists, contact customer service.

How to clean the iron soleplate?

Let the iron cool down, then wipe the soleplate with a damp cloth. Do not use abrasive products or steel wool.

The iron has a flashing light, what to do?

A flashing light may indicate heating up or a fault. Consult the manual for specific codes. Generally, wait for the iron to reach temperature.

How to descale the Termozeta A900 iron?

Use the integrated anti-calc system: fill the tank with water and white vinegar (1/3 vinegar, 2/3 water), heat the iron, then activate steam several times. Then rinse with clean water.

Can I use scented water in the iron?

No, only tap or demineralized water is recommended. Additives can clog the steam system and void the warranty.

The iron turns off by itself, is this normal?

Yes, the Termozeta A900 iron is equipped with an automatic safety shut-off. It turns off after a few minutes of inactivity. To turn it back on, gently tilt it.

What is the best temperature for ironing cotton?

Set the thermostat to the high position (3 dots) for cotton. Wait for the indicator light to go out before starting.

Where can I find spare parts for the A900?

Contact Termozeta customer service or check authorized dealers. Available parts include the tank, soleplate, and buttons.

USER MANUAL A900 TERMOZETA

Line drawing of a steam iron with attached cable, no text or symbols present

A900

Line drawing of a steam iron with attached circuit board (no text or symbols)

• DATI TECNICI E CARATTERISTICHE
• DONEES TECHNIQUES ET CARACTERISTIQUES
• TECHNICAL DATA AND FEATURES
• TECHNISCHE DATEN UND EIGENSCHAFTEN
• DATOS TECNICOS Y CARACTERISTICAS
• DADOS TÉCNICOS E CARACTERÍSTICAS

TERMOZETA

Type 105001

230Vac \~ 50Hz

2000W

MADE IN P.R.C.

DESCRIZIONE

1 Body of steam boiler
2 Iron on/off button with indicator lamp
3 Iron support base
4 Non-slip rubber tips for iron
5 Boiler cap
6 Iron-boiler connecting tube
7 Cord
8 Steam ready indicator
9 Iron
10 Soleplate
11 Steam spray button
11.a Cursor for continuos steam
12 Temperature control indicator
13 Temperature control knob
14 Thermostat indicator lamp

GB

DESCRIPTION

BESCHREIBUNG

Blue circular emblem with a white abstract design and central symbol, no readable text or numbers present.

Fig. 3

Stiratura a vapore

Stiratura ad alta temperatu- ra - Cotone - Lino

Stiratura a media tempera- tura - Seta - Lana

Blue circular emblem with a white abstract design and central symbol, no readable text or numbers present.

Fig. 3

Steam ironing

High temperature steam ironing (cotton, linen)

Medium temperature ironing (woollens, silk)

Low temperature ironing (synthetic fibres)

SAFETY REQUIREMENT

- Please read this handbook as it gives important instructions and precautions about safety, use and maintenance of your appliance and keep it carefully for future reference.

- Make sure the appliance is in good condition when you unpack it. In case of doubt do not use it and contact a TERMOZETA authorized Service Centre.

- Do not leave parts of packaging (plastic bags, foam polystyrene, nails, etc.) within reach of children or incapable persons as they are potential sources of danger.

- The electrical safety of this appliance is only assured if it has been connected correctly to an efficient earthed system as provided by electricity safety norms presently in force. Termozeta shall not be held liable for eventual damages deriving from failure to connect the electrical installation to an earthed system.

- Make sure the data on the appliance rating plate corresponds to that of the main power supply and of your electrical system before plugging into the outlet. In case of doubt, contact professionally qualified personnel.

- It is not advisable to use adapters, multiple plugs and extensions. Use devices certified and conforming to existing safety standards only should it be absolutely necessary, making sure they are compatible with your electrical system and with the appliance technical data.

- Any installations not conforming to instructions may endanger your safety and forfeit the guarantee.

- The appliance is exclusively designed for domestic use for ironing fabrics.

- For safety's sake be careful:

- not to use the appliance with bare feet or wet hands or feet

- not to use the appliance away from home

- not to leave the appliance exposed to atmospheric agents (sun, rain ...)

- not to let children or incapable persons use the appliance

- never to tug on the lead or the appliance itself to unplug from the outlet

- not to leave the appliance plugged into the main power supply unattended

- never to submerge the appliance in water or in other liquids.

- The user must not replace the appliance lead. Contact a TERMOZETA authorized Service Centre or professionally qualified person in case of need.

- Switch off and do not mishandle the appliance if it should break down and/or work badly. Contact a TERMOZETA authorized Service Centre for eventual repairs asking for original spare parts.

- Put the appliance out of service at the end of its service life by cutting off the lead after unplugging from the outlet. Abide by local existing rules and regulations for its disposal.

- Termozeta may not be held liable for eventual damages to persons, animals or objects caused by incorrect installation or deriving from improper, erroneous or unreasonable use.

INSTRUCTIONS FOR USE

ADJUSTING TEMPERATURE OF THE IRON

Turn the temperature control knob (13) of the iron so that the indicator (12) points to the temperature suited to the type of fabric you want to iron (see table in fig. 3).

FOR STEAM IRONING

HOW TO FILL THE BOILER WITH WATER

• Always unplug the iron from the outlet when doing this.
- Rest the appliance on a firm flat surface before using it.
- Unscrew the cap (5) in anticlockwise direction and slowly pour the water through the boiler opening.
- Screw up the cap again in clockwise direction.

WARNING!

Do not add more than 0.8 litres of water which is the maximum capacity of the boiler. Use running water to fill the boiler only: never add detergents, perfumed substances, chemical additives or water softeners.

Suggestions: Use distilled water, if the water is particularly calcareous.

HOW TO START

• Place the iron on the boiler support base (3).
• Turn the iron temperature control knob (13) to "steam ironing" (see table 3)
• Completely unwind the cord (7) and plug into outlet.
• The indicator lamp (14) on the iron will come on immediately and will go out a few minutes after reaching the required temperature.
• Press the on/off button (2) on the boiler taking it to (1): the indicator lamp will come on when the iron system is ready.
• The appliance is ready to use when the light (8) turns on.
• During operation, the light (8) turns on and then automatically turns off indicating that the pressure in the boiler is constantly under control.

WARNING!

Never unscrew the boiler cap (5) while the appliance is working.

IRONING

• Press button (11) on the iron for the steam jet: the steam will stop coming out when you release the button.
• The indicator light (14) on the iron and the light (8) will light up and go off automatically while ironing to show that the soleplate is being kept at a constant temperature.
• Rest the iron on the boiler support base (3) during intervals between ironing.
• With the iron held upright at a distance of 10/20 ~cm you can use the jet of steam to smooth out creases and freshen up materials while they are hanging.
• Before ironing delicate fabrics it is best to make trial run on a hidden piece e.g. the hem.
• We advise you to iron materials needing low temperatures first then go on to more resistant materials, needing higher temperatures, afterwards.
• To use the continuos steam function, press the steam output key (11) and at the same time slide the cursor (11.A) towards the handgrip. To turn this function off, slide the cursor (11.A) in the opposite direction to the handrigp.

WARNING!

• Some drops of water may leak out of the iron soleplate (10) when the jet of steam starts coming out; this is quite normal and is due to condensation forming inside the iron-boiler connecting tube (6). This will disappear with the next jet of steam. It is therefore best not to point the first jet of steam directly onto the item to be ironed.
• Never leave the iron unattended with the plug in the outlet when you are ironing.

NO MORE WATER WHILE IT IS BEING USED

The jet of steam becomes less and finally disappears if there is no more water. Carefully follow the instructions given below to fill up the heater again:

• switch off the on/off boiler button (2) by turning it to "OFF" (O); the integrated control indicator lamp will go off;
• press button (11) on the iron, until the boiler is completely empty and no more steam is being produced;
• unplug the plug from the outlet;
• slowly unscrew the boiler cap (5) in an anticlockwise direction being careful of any eventual residual steam;
• fill up the boiler following instructions given in the “How to fill the boiler with water” paragraph;
• switch on the appliance again following the same instructions given in the “How to start” paragraph.

WARNING!

Always unplug the iron from the outlet before filling the boiler with water.

WHEN YOU HAVE FINISHED IRONING

• Switch off the boiler on/off button (2) by turning it to "OFF" (O).
• Empty out all the steam left in the boiler by pressing button (11) on the iron.
• Switch off the on/off button (3) on the iron by turning it to "OFF" (O).
• Unplug the plug from the outlet.
• Rest the iron on the support base (3) and wait for the appliance to completely cool down before putting it away.

WARNING!

Never unscrew the cap (5) without emptying out all the steam from the boiler.

FOR DRY IRONING

• Rest the iron on the boiler support base (3).
• Select the right temperature (see table in figure 3) by turning the control knob on the iron (13).
• Completely unwind the cord (7) and plug into the outlet.
• The indicator lamp (14) on the iron will immediately light up. The iron has reached the set temperature and is ready to be used when the indicator lamp goes out.
• Do not press the steam jet button (11) on the iron if you want to dry iron.
• The indicator lamp (14) on the iron will light up and go off automatically while you are ironing to show that the soleplate is being kept at a constant temperature.

CLEANING YOUR IRON

• Always unplug the iron from the outlet and wait for the appliance to completely cool down before starting any cleaning operations.
- Use a normal damp sponge to clean the aluminium soleplate, or else a non-metallic kitchen scouring-pad for difficult stains.
- Use a damp cloth to clean the rest of the iron and body of the boiler only.
- Never submerge the appliance or parts of it into water or other liquid, do not use steam, chemical or abrasive substances.

PROBLEMS/REMEDIES

The appliance is not working	Make sure that the plug is plugged into the outlet.Make sure there are no problems with the mains.
The iron does not steam out or steam is not enough	Correctly rotate the steam control knob
The iron soleplate does not heat up	Check that the temperature control knob is set to iron
The appliance stops working while it is plugged into the mains	Call the SERVICE CENTRE
Appliance is connected to the mains, but doesn’t work	Call the SERVICE CENTRE
The appliance fails to produce steam while it is on	Call the SERVICE CENTRE

INFORMATION FOR USERS. In accordance with European Directives 2002/95/CE, 2002/96/CE and 2003/108/CE on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of

waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposal of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.

Termozeta Spa. reserves the right to make aesthetical and/or technical changes without notice finalised at product improvement. TERMOZETA is an international trademark. Copyright © 1995. All rights reserved.

Blue circular emblem with a white abstract design and central symbol, no readable text or numbers present.

Fig. 3

Repassage à vapeur

Blue circular emblem with a white stylized symbol and gear-like border, no readable text or numbers.

Fig. 3

Dampfbügeln

Blue circular emblem with a white abstract design and central symbol, no readable text or numbers present.

Fig. 3

Planchar a vapor

Blue circular emblem with a white abstract design and central symbol, no readable text or numbers present.

Fig. 3

Stiratura a vapore