ALPINA SF 5006 Breeze - Fan

SF 5006 Breeze - Fan ALPINA - Free user manual and instructions

Find the device manual for free SF 5006 Breeze ALPINA in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ALPINA SF 5006 Breeze - page 2
View the manual : Français FR Deutsch DE English EN Italiano IT Nederlands NL
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Pedestal fan
Brand Alpina
Model SF 5006 Breeze
Color White / Silver
Height (with stand) 130 cm
Blade diameter 40 cm
Net weight 4.2 kg
Power supply 220-240 V ~ 50 Hz
Rated power 50 W
Speeds 3 speeds (low, medium, high)
Oscillation function Yes, automatic horizontal rotation
Timer Yes, up to 2 hours
Removable protective grille Yes, for cleaning
Blade material ABS plastic
Max noise level 55 dB(A)
Maintenance and cleaning Unplug before cleaning. Use a damp cloth. Do not immerse.
Safety Standard protective grille. Non-slip base.
Spare parts available Yes (blades, grille, motor) via Alpina customer service
Warranty 2 years

Frequently Asked Questions - SF 5006 Breeze ALPINA

How to assemble the Alpina SF 5006 Breeze fan?
Attach the stand to the base, insert the telescopic tube, then mount the motor and rear grille, the blades, and finally the front grille. Tighten the fixing screws. Refer to the diagram in the manual.
How to clean the fan?
Always unplug the appliance. Remove the front grille by unscrewing the clips. Clean the blades and grilles with a soft, slightly damp cloth. Never use abrasive products or immerse the motor.
The fan is making noise, is this normal?
A slight motor noise is normal, especially at high speed. If the noise becomes loud or irregular, check that the blades are properly fixed and the grille is not loose. If the problem persists, contact customer service.
What is the power consumption of this fan?
The rated power is 50 W, which corresponds to a consumption of about 0.05 kWh per hour. With a timer, you can limit its use to save energy.
How to use the timer function?
Turn the timer knob (usually in the off position) to set the desired time (up to 2 hours). The fan will automatically turn off after this time.
Can I use this fan outdoors?
This fan is designed for indoor use only. Do not expose it to rain, moisture, or extreme temperatures.
How to adjust the height of the fan?
Loosen the locking ring on the telescopic tube, adjust to the desired height, then tighten the ring. Make sure the base is stable after each adjustment.
Does the fan oscillate?
Yes, press the oscillation button (often located on the motor) to activate horizontal rotation. Press again to deactivate.
Where to find spare parts?
Contact Alpina customer service or visit the official website. Common parts such as blades, grilles, and motor are available. Keep your model number (SF 5006) handy.
How can I download the PDF manual?
Go to notice-facile.com, search for 'Alpina SF 5006 Breeze' and click the download button. The manual is available in several languages.

User questions about SF 5006 Breeze ALPINA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Fan in PDF format for free! Find your manual SF 5006 Breeze - ALPINA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SF 5006 Breeze by ALPINA.

USER MANUAL SF 5006 Breeze ALPINA

SF-5006

EN: For your own safety read these instructions carefully before using the appliances.

Thank you for choosing Alpina home appliance. You have chosen the best appliances that offer 2 years/24 months warranty and years of service. We stand for quality, dependability and friendship forever. We hope you will choose Alpina again and make ALPINA your first choice in home appliances.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

  1. Read all instructions carefully.
  2. This appliance may only be connected to the same main voltage as shown on the rating plate.
  3. To protect against risk of electrical shock, do not immerse or rinse housing, cord or plug in water or other liquid.
  4. Close supervision is necessary when any appliance is used near children.
  5. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
  6. Do not contact any moving parts while the appliance is operating.
  7. If the supply cord is damaged, it must be replaced by the manufacturer or its authorized service agent or a similarly qualified person in order to avoid hazard & damage to the unit.
  8. The use of attachment or accessories which are not supplied with the appliance are not recommended. This could result in electrical shock or injury or permanent damage to the appliance.
  9. Do not let cord hang over edge of table or counter or touch hot surface.
  10. Do not use the appliance for other than intended household use.
  11. Switch off the appliance before changing accessories or approaching parts, which move in use.
  12. The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.

This appliance is for household use and may be plugged into any AC electrical outlet (ordinary household current). Do not use any other electrical outlet.

INSTRUCTION MANUAL

Dear Customer,

Please read these Operating Instructions through carefully before connecting your device to the mains, in order to avoid damage due to incorrect use. Please pay attention to the safety information. If you pass the device on to a third party, these Operating Instructions must also be handed over.

SAFETY INFORMATION

  • Incorrect operation and improper handling can lead to faults on the device and injuries to the user.
  • In the event of improper use or incorrect handling, no liability can be accepted for any damages that may occur.
  • Before you put the plug in the socket, please check that the type of current and mains voltage correspond to the instructions on the nameplate on the underside of the appliance.
  • Do not immerse the unit or mains plug in water or other liquids. There is danger to life due to electric shock! However, if this should occur, remove the mains plug immediately and then have the unit checked by an expert before using it again.
  • Do not operate the device if the mains cable or the mains plug show signs of damage, if the device has fallen on the floor or has been otherwise damaged. In such cases take the device to a specialist for checking and repair, if necessary.

- Ensure that the mains cables does not hang over sharp edges and keep it away from hot objects and open flames. Only pull it out of the socket by the plug, not by the cable.

- Place the appliance on a stable, even surface, away from hot objects or open flames (e.g. hotplates).

- Lay the cable – and the extension cable, if required – in such a way that it cannot be inadvertently pulled and no one can trip over it.

- This device is not suitable for commercial use nor for use in open air. Do not use fan in a window.

- You should never leave the device unattended during use.

- Children cannot recognize the hazards which attend improper handling of electrical devices. Therefore, children should never use electrical domestic appliances unsupervised.

- Remove the mains plug from the socket when the device is not in use and before cleaning.

- Never attempt to put any object or your fingers into the fan while the fan is in operation.

- Never operate the fan without the protective grille, and do not cover the grille.

1.Body 2.Front base 3.Screw 4.Screw 5.Cord mount 6.Power cord 7.ON/OFF Switch 8.Speed Selector 9.Timer 10.Oscillation /Swing 11.Wind wave 12.Timer 13.Swing 14.Wind 15.Speed 16.On/Off

Inserting / changing batteries of your Remote control unit: Your fan is equipped with remote control unit. Before first use you should remove the back cover & insert 2 x AAA batteries with correct polarity as show in the battery compartment of the remote control (batteries not included), then put back cover tightly.

Super Quite operation

Space saving smart Design

90 degree oscillation (use the degree sign)

Remote control

BEFORE FIRST USE

- Remove all packaging material.

- Pull power cord (7) out slightly.

- Put the rear base (2) on the body (1) by inserting the cylinders under the body (1) to blind holes on rear base (2).

- Put front base (3) on rear base (2) and body (1), fix body (1), rear base (2) and front base (3) with screws (4).

- Press power cord with cord mount (6) and fix the screws (5).

OPERATION

ENGLISH

  • Connect the mains plug to a suitable socket.
    • The fan has 3 speed levels:
    0 - on/off
    1 - low
    2 - medium
    3 - high

  • The air flow can be angled to left or right by pushing the button of body oscillating switch (3). If you want to stop angling, push it again.

  • Automatic 7.5h timer: Turn the knob of timer to position which set the time you want, the fan will stop when the timer is over, The longest time set is 7.5 hours. In case the timer is not use, set the timer to "ON".

CLEANING AND CARE

Please also observe the safety advice for this.

• The exterior of the fan can be cleaned with a damp cloth.
- Do not use any harsh cleaning agents or hard brushes.

SPECIFICATION

Operating voltage : 220-240VAC, 50 Hz

Power consumption : 45W

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee:

For the purchased device we provide 2 years of guarantee, commencing from the day of sale. During this period we will remedy all defects free of charge, which can be demonstrably attributed to material of manufacturing defects, by repair or exchange.

Lieber Kunde,

MANUEL D'INSTRUCTION

Cher Client,

Inserting / changing batteries of your Remote control unit: Your fan is equipped with remote control unit. Before first use you should remove the back cover & insert 2 x AAA batteries with correct polarity as show in the battery compartment of the remote control (batteries not included), then put back cover tightly.

FRANÇAIS

Super Quite operation

Space saving smart Design

90 degree oscillation (use the degree sign)

Remote control

AVANT LA PREMIERE UTILISATION

Top View Presentazione in Piano verticale
Base Assembly Montaggio base
Remote control Telecomando
UnitUnita

BELANGRIJKE VEILIGHEIDSWAARSCHUWINGEN

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ALPINA

Model : SF 5006 Breeze

Category : Fan