B26JD - String Trimmer ALPINA - Free user manual and instructions
Find the device manual for free B26JD ALPINA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | String trimmer / grass trimmer |
| Brand | Alpina |
| Model | B26JD |
| Engine type | 2-stroke petrol engine |
| Engine displacement | 26 cc |
| Power output | 0.75 kW (approx. 1 hp) |
| Fuel type | Mixed petrol-oil at 40:1 ratio |
| Fuel tank capacity | 0.5 L |
| Cutting method | Tap-and-go automatic line feed |
| Cutting line diameter | 2.0 mm |
| Cutting width | 41 cm |
| Shaft design | Straight shaft |
| Handle type | Loop handle with soft grip |
| Starting system | Recoil starter with easy-start valve |
| Anti-vibration | Rubber anti-vibration mounts |
| Safety features | Debris shield, engine brake, safety guard |
| Weight | 5.4 kg (approx.) |
| Dimensions (L x W x H) | 145 x 25 x 28 cm (approx.) |
| Maintenance | Clean air filter, check spark plug, sharpen/replace line |
| Repairability | Spare parts available; serviceable carburetor and starter |
Frequently Asked Questions - B26JD ALPINA
What fuel mixture does the Alpina B26JD trimmer use?
Use a 40:1 petrol-oil mix (25 ml 2-stroke oil per litre of unleaded petrol). Use quality 2-stroke oil for protection and longevity.
How do I replace the trimmer line?
Turn off the engine and disconnect the spark plug. Press the tap-and-go head, remove the spool cap, insert new 2.0 mm line, wind it evenly, and feed it through the eyelets.
My trimmer will not start. What should I check?
Check that the fuel tank has fresh mixture, the spark plug is clean and correctly gapped, and the air filter is not clogged. Confirm the choke is in the right position and the stop switch is on.
How often should I clean the air filter?
Inspect the air filter every 5 hours of use, more often in dusty conditions. Clean it with warm soapy water or compressed air, let it dry completely, then reinstall.
Why does the trimmer vibrate excessively?
Look for a damaged cutting head, bent shaft, or loose fasteners. Replace worn parts and use the anti-vibration mounts to reduce operator fatigue.
What safety gear should I wear?
Always wear protective goggles, hearing protection, long trousers, non-slip gloves, and sturdy boots. Never operate the trimmer without the debris shield fitted.
Can I use metal blades on this trimmer?
The B26JD is designed as a string trimmer. Using metal blades can overload the drive system and void your warranty. Stick to the recommended line diameter.
How should I store the trimmer for winter?
Drain the fuel tank and run the engine dry to prevent gumming. Clean the exterior, remove the spark plug, pour one teaspoon of oil into the cylinder, and pull the starter slowly before replacing the plug.
What is the best technique for cutting edges?
Hold the trimmer at a slight angle so the line contacts the edge only. Keep the engine at full speed and approach slowly to avoid cutting into hard surfaces like curbs or paths.
Where can I find spare parts for the B26JD?
Genuine Alpina spare parts are available from authorized dealers or online parts diagrams. Always quote the model number and engine specification when ordering.
User questions about B26JD ALPINA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your String Trimmer in PDF format for free! Find your manual B26JD - ALPINA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B26JD by ALPINA.
USER MANUAL B26JD ALPINA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALPINA
Model : B26JD
Category : String Trimmer