ALPINA

B32D - String Trimmer ALPINA - Free user manual and instructions

Find the device manual for free B32D ALPINA in PDF.

📄 36 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ALPINA B32D - page 20
View the manual : English EN Italiano IT
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type String Trimmer (Brush Cutter)
Brand ALPINA
Model B32D
Engine Type 2-Stroke Petrol Engine
Engine Displacement 32 cc
Power Output 0.9 kW (1.2 hp)
Fuel Type Petrol and 2-stroke oil mixture (25:1 or 50:1)
Fuel Tank Capacity 0.7 L
Cutting Method Nylon line with automatic feed
Cutting Width 43 cm (17 in)
Shaft Type Straight shaft
Handle Type Bicycle handle with anti-vibration grip
Weight 5.8 kg (without fuel and cutting attachment)
Dimensions (L x W x H) 178 cm x 30 cm x 30 cm
Starting System Recoil starter with primer
Vibration Level 6.8 m/s² (front handle)
Sound Pressure Level 96 dB(A)
Cutting Line Diameter 2.4 mm
Safety Features Stop switch, protective guard, harness attachment
Maintenance Clean air filter, check spark plug, sharpen blade if used
Repairability Spare parts available; engine and drive shaft serviceable

Frequently Asked Questions - B32D ALPINA

What type of engine does the ALPINA B32D string trimmer have?
The ALPINA B32D is equipped with a 2-stroke petrol engine with a displacement of 32 cc, providing a power output of approximately 0.9 kW.
What is the recommended fuel mixture for the B32D?
This trimmer runs on a mixture of petrol and 2-stroke oil. The recommended ratio is typically 25:1 or 50:1 depending on the oil quality. Always consult the manual and mix in a separate container for proper lubrication.
How do I replace the cutting line on the ALPINA B32D?
To replace the line, remove the spool cover, take out the empty spool, and wind new 2.4 mm nylon line evenly. Insert the ends into the eyelets, reassemble, and allow the auto-feed mechanism to extend the line during operation.
What safety gear should I use when operating this trimmer?
Always wear protective goggles, ear protection, gloves, long trousers, and sturdy boots. If using the brush cutter blade, a shoulder strap and face shield are strongly recommended to prevent injury from flying debris.
How do I start the B32D engine?
Prime the carburetor by pressing the primer bulb 3–5 times, set the choke to the cold start position, pull the recoil starter grip firmly, then adjust the choke once the engine starts. Allow the engine to warm up before trimming.
Can I use a metal blade on the ALPINA B32D?
Yes, the B32D is a versatile brush cutter that can fit a metal cutting blade for thick vegetation. Ensure the blade is correctly mounted and the guard is appropriate for blade use. Never use a blade without the dedicated guard.
How often should I clean the air filter?
Clean the air filter after every 5 hours of use or more frequently in dusty conditions. Remove the cover, tap the filter gently to remove dirt, and wash with mild soap if necessary. Replace if damaged.
What should I do if the trimmer vibrates excessively?
Excessive vibration can be caused by a bent shaft, damaged cutting head, or loose fasteners. Stop the engine and inspect the cutting attachment and drive system. Replace worn parts and ensure the handle bolts are tightened. If vibration persists, contact a service center.
How do I store the trimmer for the winter season?
For long-term storage, empty the fuel tank completely or add fuel stabilizer. Remove the spark plug and pour a teaspoon of oil into the cylinder, pull the starter once to distribute, then replace the plug. Clean the trimmer and store it in a dry, sheltered place.
Is the ALPINA B32D suitable for trimming around trees and edges?
Absolutely. The straight shaft and automatic line feed make it easy to reach around obstacles and trim along edges. Use the edge guide to maintain a consistent distance from walls and curbs, reducing line wear.

User questions about B32D ALPINA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your String Trimmer in PDF format for free! Find your manual B32D - ALPINA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B32D by ALPINA.

USER MANUAL B32D ALPINA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ALPINA

Model : B32D

Category : String Trimmer