Nespresso Essenza Automatic XN2107 - Coffee machine KRUPS - Free user manual and instructions

Product type	Nespresso capsule coffee machine
Brand	Krups
Model	Nespresso Essenza Automatic XN2107
Dimensions (W x D x H)	28.5 x 11.5 x 25 cm
Weight	3 kg
Power supply	220-240 V, 50-60 Hz
Power	1260 W
Water tank capacity	0.7 L
Maximum pressure	19 bars
Type of coffee used	Original Nespresso capsules
Main functions	Espresso (40 ml) and Lungo (110 ml)
Automatic shut-off	Yes, after 9 minutes of inactivity
Used capsule ejection	Automatic into the capsule container
Used capsule container capacity	Up to 10 capsules
Chassis material	Thermoplastic plastic
Drip tray	Removable for tall cups
Cleaning	Descaling recommended every 3 months with Krups kit
Maintenance	Rinse the water tank regularly
Safety	Automatic shut-off, overheating protection
Spare parts available	Tank, drip tray, buttons, descaling kits
Repairability	Repairability index: 7.2/10 (estimate)
Warranty	2 years (depending on country)
General information	Compact and easy-to-use machine

Frequently Asked Questions - Nespresso Essenza Automatic XN2107 KRUPS

How do I descale my Krups Nespresso Essenza XN2107?

Use the Krups descaling kit. Fill the tank with the solution and water, start the program by holding the espresso button for 3 seconds, then repeat with clean water.

Which capsules can I use?

Only original Nespresso capsules. Compatible capsules may damage the appliance and void the warranty.

How to adjust the water volume?

Hold down the espresso or lungo button during extraction until the desired amount. The machine memorizes this setting for the next use.

Why is my machine no longer heating up?

Check that the water tank is properly seated and that the machine is not in automatic shut-off mode. Wait 2 minutes after turning on. If the problem persists, contact Krups customer service.

How to clean the drip tray?

Remove the drip tray and grid, wash them with warm soapy water, rinse and dry before putting back.

What to do if coffee flows slowly?

This may indicate a need for descaling. Also repeat the circuit rinse. Check that the capsule is not clogged.

How to adjust the water hardness?

Press the lungo button for 3 seconds until the lights flash. Use the espresso button to select the level (1-4), then confirm with lungo.

Can the automatic shut-off be disabled?

No, it is set to 9 minutes. This saves energy and protects the appliance.

How to know if the tank is empty?

The lights flash quickly and the machine beeps. Fill the tank and reinsert it.

What is the lifespan of the machine?

With regular maintenance and descaling every 3 months, the machine can last 5 to 8 years depending on usage.

USER MANUAL Nespresso Essenza Automatic XN2107 KRUPS

Nespresso, an exclusive system creating the perfect Espresso, time after time.

All machines are equipped with a unique extraction system that guarantees up to 19 Bar pressure. Each parameter has been calculated with great precision to ensure that all the aromas from each Grand Cru can be extracted, to give the coffee body and create an exceptionally thick and smooth crema.

These instructions are part of the appliance. Read all instructions and all safety instructions before operating the appliance.

PROGRAMMING THE WATER VOLUME ..... 15

EMPTYING THE SYSTEM BEFORE A PERIOD OF NON-USE AND FOR FROST PROTECTION, OR BEFORE A REPAIR

EMPTYING THE SYSTEM BEFORE A PERIOD OF NON-USE AND FOR FROST PROTECTION, OR BEFORE A REPAIR

16

RESET TO FACTORY SETTINGS .... 17

DESCALING 18

CLEANING 20

TROUBLESHOOTING 21

CONTACT THE NESPRESSO CLUB 22

DISPOSAL AND ENVIRONMENTAL PROTECTION 22

ECOLABORATION: ECOLABORATION.COM

ECOLABORATION: ECOLABORATION.COM 23

LIMITED WARRANTY/GARANTIE LIMITEE 24

SAFETY PRECAUTIONS

CAUTION: the safety precautions are part of the appliance. Read them carefully before using your new appliance for the first time. Keep them in a place where you can find and refer to them later on. CAUTION: when you see this sign, please refer to the safety precautions to avoid possible harm and damage.

INFORMATION: when you see this sign, please take note of the advice for the correct and safe usage of your appliance.

• The appliance is intended to prepare beverages according to these instructions.
• Do not use the appliance for other than its intended use.
• This appliance has been designed for indoor and non-extreme temperature conditions use only.
• Protect the appliance from direct sunlight effect, prolonged water splash and humidity.
• This appliance is intended to be used in households and similar applications only such as: staff kitchen areas in shops, offices and other working environments, farm houses; by clients in hotels, motels and other residential environments; bed and breakfast type environments.
• This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about

using the appliance safely and are fully aware of the dangers involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and they are supervised by an adult.

• Keep the appliance and its cord out of reach of children under 8 years of age.
• This appliance may be used by persons with reduced physical, sensory or mental capabilities, or whose experience or knowledge is not sufficient, provided they are supervised or have received instruction to use the appliance safely and understand the dangers. Children shall not use the device as a toy.
• The manufacturer accepts no responsibility and the guarantee will not apply for any commercial use, inappropriate handling or use of the appliance, any damage resulting from use for other purposes, faulty operation, non-professionals' repair or failure to comply with the instructions.

SAFETY PRECAUTIONS

Avoid risk of fatal electric shock and fire.

• In case of an emergency: immediately remove the plug from the power socket.
• Only plug the appliance into suitable, easily accessible, earthed mains connections. Make sure that the voltage of the power source is the same as that specified on the rating plate. The use of an incorrect connection voids the guarantee.

The appliance must only be connected after installation.

• Do not pull the cord over sharp edges, clamp it or allow it to hang down.
• Keep the cord away from heat and damp.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons, in order to avoid all risks.
• If the cord is damaged, do not operate the appliance.
• Return the appliance to the Nespresso Club or to a Nespresso authorized representative.
• If an extension cord is required, use only an earthed cord with a conductor cross-section of at least 1.5 mm² or matching input power.
• To avoid hazardous damage, never place the appliance on or beside hot surfaces such as radiators, stoves, ovens, gas burners, open flame, or similar.
• Always place it on a horizontal, stable and even surface. The surface must be resistant to heat and fluids, like water, coffee, descaler or similar.
• Disconnect the appliance from the mains when not in use for a long period. Disconnect by pulling out the plug and not by pulling the cord itself or the cord may become damaged.
• Before cleaning and servicing, remove the plug from the mains socket and let the appliance cool down. Never touch the cord with wet hands.
• Never immerse the appliance or part of it in water or other liquid.
• Never put the appliance or part of it in a dishwasher. Electricity and water together is dangerous and can lead to fatal electrical shocks.
• Do not open the appliance. Hazardous voltage inside!
• Do not put anything into any openings. Doing so may cause fire or electrical shock!

SAFETY PRECAUTIONS

Avoid possible harm when operating the appliance.

• Never leave the appliance unattended during operation.
• Do not use the appliance if it is damaged or not operating perfectly. Immediately remove the plug from the power socket. Contact the Nespresso Club or Nespresso authorized representative for examination, repair or adjustment.
• A damaged appliance can cause electrical shocks, burns and fire. Always completely close the lever and never lift it during operation. Scalding may occur.
• Do not put fingers under coffee outlet, risk of scalding.
• Do not put fingers into capsule compartment or the capsule shaft. Danger of injury! Water could flow around a capsule when not perforated by the blades and damage the appliance.
• Never use a damaged or deformed capsule. If a capsule is blocked in the capsule compartment, turn the machine off and unplug it before any operation. Call the Nespresso Club or Nespresso authorized representative. Always fill the water tank with cold, fresh drinking water.
• Empty water tank if the appliance will not be used for an extended time (holidays, etc.).
• Replace water in water tank when the appliance is not operated for a weekend or a similar period of time.
• Do not use the appliance without the drip tray and drip grid to avoid spilling any liquid on surrounding surfaces.
• Do not use any strong cleaning agent or solvent cleaner. Use a damp cloth and mild cleaning agent to clean the surface of the appliance. • To clean machine, use only clean cleaning tools.
• When unpacking the machine, remove the plastic film and dispose.
• This appliance is designed for Nespresso coffee capsules available exclusively through the Nespresso Club or your Nespresso authorized representative.
• All Nespresso appliances pass stringent controls. Reliability tests under practical conditions are performed randomly on selected units. This can show traces of any previous use.
• Nespresso reserves the right to change instructions without prior notice.

SAFETY PRECAUTIONS

Descaling

- Nespresso descaling agent, when used correctly, helps ensure the proper functioning of your machine over its lifetime and that your coffee experience is as perfect as the first day. For the correct amount and procedure to follow, consult the user manual included in the Nespresso descaling kit.

SAVE THESE INSTRUCTIONS

Pass them on to any subsequent user.

This instruction manual is also available as a PDF at nespresso.com

SAFETY INSTRUCTIONS

To turn the machine off before automatic Power Off mode, press both the Espresso and Lungo button simultaneously.

To change this setting:

1. With machine being turned off, press and hold the Espresso button for 3 seconds.
2. With the machine turned off, press and hold the Espresso button for 3 seconds.

1. Place a container (min. 1 L) under coffee outlet.
2. Place a container (min. 1 L) under the coffee outlet.

1. Remove the plastic film from the drip grid.
2. Remove the plastic film from the drainage grid.

Blinking Lights: heating up (25 sec)

Blinking Lights: heating up (25 sec)

CAUTION: never lift lever during operation and refer to the safety precautions to avoid possible harm when operating the appliance.

PROGRAMMING THE WATER VOLUME

1. Press both the Espresso and Lungo button for 3 seconds.
2. Press both the Espresso and Lungo buttons simultaneously for 3 seconds.

Both LEDs blink alternatively.

1. With machine being turned off, press and hold down the Lungo button for 5 seconds.
2. With the machine turned off, press and hold the Lungo button for 5 seconds.

Power Off mode: 9 min

1. Remove the capsule and close the lever.
2. Remove the capsule and close the lever.

1. Place a container (min. volume 1 L) under the coffee outlet.
2. Place a container (min. 1 liter volume) under the coffee outlet.

1. To enter the descaling mode, while the machine is turned on, press both the Espresso and Lungo buttons for 3 seconds.
2. To enter descaling mode (with the machine on), press the Espresso and Lungo buttons simultaneously for 3 seconds.

Risk of fatal electrical shock and fire.

Never immerse the appliance or part of it in water.

Be sure to unplug the machine before cleaning.

Do not use any strong cleaning agent or solvent cleaner.

Do not use sharp objects, brushes or sharp abrasives.

Do not place in a dishwasher.

ATTENTION

Clean the coffee outlet regularly with a soft damp cloth.

Maintenance unit can be removed in separate pieces for easy cleaning.

No light indicator.	→ Check the mains, plug, voltage, and fuse. In case of problems, call the Nespresso Club.
No coffee, no water.	→ Water tank empty – fill water tank with potable water.→ Descale, if necessary.→ Fill up the water pump*
Coffee comes out very slowly.	→ Flow speed depends on the coffee variety.→ Descale if necessary; see Descaling section.
Coffee is not hot enough.	→ Preheat cup.→ Descale if necessary.
Capsule area is leaking (water in capsule container).	→ Position capsule correctly. If leakages occur, call the Nespresso Club.
Irregular blinking.	→ Send appliance to repair or call the Nespresso Club.
No coffee, just water runs out (despite inserted capsule).	→ In case of problems, call the Nespresso Club.

CONTACT THE NESPRESSO CLUB/

CONTACT THE NESPRESSO CLUB

As we may not have foreseen all uses of your appliance, should you need any additional information, in case of problems or simply to seek advice, call the Nespresso Club or your Nespresso authorized representative.

Contact details for your nearest Nespresso Club or your Nespresso authorized representative can be found in the «Welcome to Nespresso» folder in your machine box or at nespresso.com

This appliance complies with the EU Directive 2002/96/EC. Packaging materials and appliance contain recyclable materials.

Your appliance contains valuable materials that can be recovered or can be recyclable. Separation of the remaining waste materials into different types facilitates the recycling of valuable raw materials. Leave the appliance at a collection point. You can obtain information on disposal from your local authorities.

ECOLABORATION: ECOLABORATION.COM/ECOLABORATION: ECOLABORATION.COM

We have committed to buy coffee of the very highest quality grown in a way that is respectful of the environment and farming communities. Since 2003 we have been working together with the Rainforest Alliance developing our Nespresso AAA Sustainable Quality™ Coffee Program.

We chose aluminium as the material for our capsules because it protects the coffee and aromas of the Nespresso Grand Cru. Aluminium is also infinitely recyclable, without losing any of its qualities.

Nespresso is committed to designing and making appliances that are innovative, high-performing and user friendly. Now we are engineering environmental benefits into the design of our new and future machine ranges.

Krups guarantees this product against defects in materials and workmanship for a period of two years from the date of purchase. During this period, Krups will either repair or replace, at its discretion, any defective product at no charge to the owner. Replacement products or repaired parts will be guaranteed for only the unexpired portion of the original guarantee or six months, whichever is greater. This limited guarantee does not apply to any defect resulting from accident, misuse, improper maintenance, or normal wear and tear. Except to the extent allowed by applicable law, the terms of this limited guarantee do not exclude, restrict or modify, and are in addition to, the mandatory statutory rights applicable to the sale of the product to you. If you believe your product is defective, contact Krups for instructions on where to send or bring it for repair.

SAFETY INSTRUCTIONS

1. The Espresso button will blink to indicate the current setting.
2. The Espresso button will blink to indicate the current setting.

1. To change the setting, press the Espresso button: Press once to activate the automatic shut-off after 9 minutes. Press again to activate the automatic shut-off after 30 minutes.
2. To change the setting, press the Espresso button: Press once for the shut-off mode after 9 minutes. Press again for the shut-off mode after 30 minutes.

Buttons blinking: Heating phase (25 seconds) Intermittent lights: Heating (25 sec)

1. Press the Espresso button (40 ml) or the Lungo button (110 ml). The preparation will stop automatically. To stop the coffee flow manually or to increase the coffee amount, press the button again.
2. Press the Espresso button (40 ml) or the Lungo button (110 ml). The preparation will stop automatically. To stop the coffee flow or to increase the coffee amount, press the button again.

1. To empty the system, press the Espresso and Lungo buttons simultaneously to turn off the machine.
2. To enter the emptying mode, press the Espresso and Lungo buttons together to turn off the machine.

Both buttons blink alternately. Both LEDs blink alternately.

1. Rapid triple blinking of the buttons confirms the reset to factory settings.
2. The LEDs will blink quickly 3 times to confirm that the machine has been reset to factory settings.

1. Fill the water tank with one sachet of Nespresso descaling solution and 0.5 L of tap water.
2. Fill the water tank with 500 ml of drinking water and add 1 Nespresso descaling solution.

1. To start the descaling process, press and hold the Espresso and Lungo buttons simultaneously for 3 seconds while the machine is in ready mode.
2. To enter descaling mode, press both buttons for 3 seconds with the machine on.

Both buttons blink. Both LEDs blink.

1. Place a container (min. 1 L) under the coffee outlet.
2. Place a container (min. 1 L) under the coffee outlet.

Flashing lights: heating up (25 s)

1. Press the Espresso (40 ml) or Lungo (110 ml) button to start. The preparation will stop automatically. To stop the coffee flow or fill your cup, press again.
2. Press the Espresso (40 ml) or Lungo (110 ml) button to start. The extraction will stop automatically.

1. The LEDs will continue to blink normally while the machine heats up until it is ready.
2. LEDs will continue to blink normally while heating until the machine is ready. Steady lights: machine ready

Default settings:

Espresso cup: 40 ml Lungo cup: 110 ml Auto-off mode: 9 min

Both LEDs blink.

1. When ready, repeat steps 4 and 6 to rinse the machine.
2. Once ready, repeat points 4 and 6 to now rinse the machine.

BEFORE FIRST USE, OR AFTER A LONG PERIOD OF INACTIVITY

1. Press the Lungo button and wait until the water tank is empty.
2. Press the Lungo button and wait until the water tank is empty.

SAFETY INSTRUCTIONS

1. The Espresso button will start blinking to show the current setting.
2. The Espresso button will start blinking to indicate the current value.

1. Press the Espresso or Lungo button to start the machine.
2. Press the Espresso or Lungo button to turn on the coffee machine.

1. Press the Espresso or Lungo button to start the machine.
2. Press the Espresso or Lungo button to turn on the coffee machine.

1. Remove the cup. Lift and close the lever to eject the capsule into the used capsule container.
2. After brewing, lift and lower the lever to eject the capsule into the used capsule container.

PROGRAMMING WATER VOLUME

1. Place the cup under the coffee outlet.
2. Place the cup under the coffee outlet.

1. Press and hold the Espresso or Lungo button.
2. Press and hold the Espresso or Lungo button.
3. Release the button when the desired level is reached.
4. Release the button when the desired volume is reached.
5. The set coffee volume has been saved.
6. The water level volume has been saved in memory.

DRAINING THE SYSTEM BEFORE REPAIR, BEFORE PERIODS OF NON-USE, OR FOR PROTECTION AGAINST FREEZING

NOTE: The device will be locked for 10 minutes after the draining mode is completed.

1. To activate the descaling mode, press the Espresso and Lungo buttons simultaneously for 3 seconds while the machine is in standby mode.
2. To activate the descaling mode, press and hold the Espresso and Lungo buttons for 3 seconds while the coffee machine is on.

1. Pour the descaling solution from the container into the water tank and repeat steps 4 and 6.
2. Pour the used solution into the tank and repeat steps 4 and 6.

ECOLABORATION: ECOLABORATION.COM

Nespresso is committed to purchasing the highest quality coffee, grown with respect for the environment and the rights of farming communities. Since 2003, we have been working with the Rainforest Alliance to implement the Nespresso AAA Sustainable Quality™ program. Aluminum is a material that protects our coffee and the Grand Cru Nespresso aromas sealed in each capsule. Aluminum is fully recyclable without losing any of its properties. Nespresso aims to design and create innovative, reliable, and user-friendly machines. The designs of our new machine models take into account the need to protect the environment. We purchase the highest quality coffee, grown with respect for the environment and support for farming communities. Since 2003, we have been working with the Rainforest Alliance to develop our Nespresso AAA Sustainable Quality™ program. We chose aluminum as the packaging material for our capsules because it protects the coffee and the Nespresso Grand Cru aromas. Aluminum can be recycled infinitely without losing its qualities. Nespresso develops and manufactures innovative, high-tech, and easy-to-use coffee machines. We now make environmental care part of the design of our new and future coffee machine lines.

WARRANTY

ECOLABORATION: ECOLABORATION.COM

WARRANTY

SAFETY PRECAUTIONS

To turn off the machine before it automatically shuts down, press the Espresso and Lungo buttons simultaneously. To turn off the machine before it automatically enters standby mode, press the Espresso and Lungo buttons simultaneously.

1. Press the Espresso button to change this setting: once for shutdown mode after nine minutes, again for shutdown mode after thirty minutes.
2. To change this setting, press the Espresso button: once for the 9-minute auto-off function, once more for the 30-minute auto-off function.

1. Connect the machine to the mains power supply.
2. Plug it into the socket.

1. Close the capsule holder and place a cup under the coffee outlet.
2. Close the lever and place a cup under the coffee outlet.

1. Switch on the machine and wait until it is ready for use (indicator light stays on).
2. Switch on the machine and wait until it is ready (lights stay on steadily).

Both indicator lights flash alternately.

1. Close the capsule holder.
2. Close the lever.
3. The machine will now switch off automatically.
4. The machine turns off automatically.
5. Empty and clean the capsule container and the drip tray.
6. Empty and clean the used capsule container and the drip tray.

RESTORE FACTORY SETTINGS / ΕΠΑΝΑΦΟΡΑ ΕΡΓΟΣΤΑΣΙΑΚΩΝ ΡΥΘΜΙΣΕΩΝ

1. The indicator lights blink three times quickly to confirm that the factory settings have been restored on the machine.
2. The LED lights blink quickly 3 times to confirm that the machine has been restored to factory settings.

1. The indicator lights then blink normally, just like during heating, until the machine is ready for use.
2. Then, the LED lights will blink normally during preheating until the machine is ready.

Indicator LEDs stay on: ready for use Steady light: the machine is ready

Factory settings:

Espresso cup: 40 ml

Lungo cup: 110 ml

1. Empty the drip tray and the capsule container.
2. Empty the drip tray and the used capsule container.

1. Fill the water reservoir with 0.5 L drinking water and add a sachet of Nespresso descaling agent. Fill the water tank with 0.5 L of water and add 1 liquid cleaner from Nespresso.

Both indicator lights blink. Both LED lights blink.