KSK-3201 RF - Keyboard KeySonic - Free user manual and instructions

USER MANUAL KSK-3201 RF KeySonic

... touch the difference

KSK-3201 RF

KSK-3201 BT

Bedienungsanleitung

Operation Manual

WIRELESS RF 2.4 GHz

WIRELESS Bluetooth

Super Mini

CE, FCC, WEEE/RoHS, REACH

Kompatibilität:

XP / Vista / Windows7

WIRELESS RF 2.4 GHz

CE, FCC, WEEE/RoHS, REACH

Kompatibilität:

XP / Vista / Windows7

WIRELESS Bluetooth

5. Installation KSK-3201 RF

Close-up of a printer's internal components including a USB drive and a separate USB port (no visible text or symbols)

MILKON ELECTRATOR Protection MILKON ELECTRATOR Protection

Simple grayscale illustration of a cylindrical battery (no text or symbols)

2 x

Close-up of a black computer keyboard with red annotations pointing to specific keys

Close-up of a smartphone camera lens with a red arrow pointing to the lens (no text or symbols visible)

Close-up of a smartphone screen with a black circular button and red arrow pointing to the top (no text or symbols visible)

6. Installation KSK-3201 BT

Close-up of a black electronic device's internal components with a red arrow pointing to a button (no text or symbols visible)

Close-up of a battery label with Chinese text and electrical symbols, likely indicating a technical or safety feature.

Simple grayscale gradient cylinder with a small square mark at the top (no text or symbols)

2x

Pairing LED

DE BERO 10:17

1. Special features KSK-3201 RF

Extremely slim, wireless super-mini keyboard with built-in trackball

Far-ranging and reliable radio-frequency transmission at 2.4 GHz up to approx. 7 m away from the PC•

Built-in 8 mm laser trackball with mouse function and two mouse buttons•

Modern design with flat notebook keys and a texture of brushed metal

12 multifunctional keys for Pairing, Play/ Pause, Stop, Backward, Forward, Media player, Mail, Internet, •

Mute, Volume down, Volume up and Sleep mode

Full functionality of a full-size layout keyboard •

Extremely silent stroke and tactile feedback due to high-quality X-Type membrane technology •

Status LED for Pairing and Battery low < 2.2 V with different blinking frequency•

Plug & Play installation, no special driver necessary•

Incl. USB receiver•

Optimal for Digital Living-Rooms (HTPC), mobile use as well as for training, conference & presentation

facilities etc.

2. Technical data KSK-3201 RF

Key count:

Construction of keyboard:

Life expectancy:

Switch travel:

Pressure point:

Transmission frequency:

Construction of trackball:

Effective operation distance:

Battery type:

Power supply:

Power consumption (avg.):

Temperature:

Humidity:

Content of delivery:

Colour:

Certified:

Compatibility:

84 (83-87 depending on country layout)

X-Type membrane technology

approx. 5 million strokes per key; approx. 1 million for mouse buttons

1.7 ±0.3 mm total run

55 ±15 g

2.405\~2.475 GHz, GFSK, 71 Channels each of 216 IDs

("Channels" to differentiate keyboards in one room)

∅ 8 mm, Laser scanning, 400 dpi

approx. 7 m

2× AAA 1.5 V

Keyboard: 3 V_DC ± 5 % Receiver: +5 V _DC ± 5 %

Keyboard Operating: 6 mA Receiver: 60 mA (max.)

Keyboard Standby: <1 mA

Keyboard Sleep-Mode: 200 μA

Operating: 0 °C up to +40 °C

Storage: -30^ up to +65^

Operating and storage: 0 % up to 95 % RH

Keyboard, USB receiver, 1 pair of batteries, user manual

Black

CE, FCC, WEEE/RoHS, REACH

XP / Vista / Windows7

WIRELESS RF 2.4 GHz

Manufacturer's Disclaimer Statement

The information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document and/or the products associated with it at any time without obligation to notify any person or organization of such changes. In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages. This document contains materials protected by copyright. All rights are reserved. No part of this manual may be reproduced or transmitted in any form, by any means or for any purpose without expressed written consent of its authors. Product names appearing in this document are mentioned for identification purchases only. All trademarks, product names or brand names appearing in this document are registered property of their respective owner.

1. Special features KSK-3201 BT

Extremely slim, wireless super-mini keyboard with built-in trackball

Far-ranging and reliable Bluetooth transmission up to approx. 10 m away from the PC

Built-in 8 mm laser trackball with mouse function and two mouse buttons•

Modern design with flat notebook keys and a texture of brushed metal

11 multifunctional keys for Pairing, Play/ Pause, Stop, Backward, Forward, Media player, Mail, Internet, •

Mute, Volume down & up

Full functionality of a full-size layout keyboard •

Extremely silent stroke and tactile feedback due to high-quality X-Type membrane technology •

Status LEDs: blue for Pairing and red for Battery low < 2.3 V•

Plug & Play installation, no special driver necessary•

Incl. USB Bluetooth adapter to connect keyboard with not Bluetooth enabled computers

Optimal for Digital Living-Rooms (HTPC), mobile use as well as for training, conference & presentation

facilities etc.

2. Technical data KSK-3201 BT

Key count:

Construction of keyboard:

Life expectancy:

Switch travel:

Pressure point:

Transmission frequency:

Power output:

Construction of trackball:

Effective operation distance:

Battery type:

Power supply:

Power consumption (avg.):

Temperature:

Humidity:

Content of delivery:

Colour:

Certified:

Compatibility:

84 (83-87 depending on country version)

X-Type membrane technology

approx. 5 million strokes per key; approx. 1 million for mouse buttons

1.7 ±0.3 mm total run

55 ±15 g

2.401 - 2.48 GHz ISM Band, GFSK, 79 channels Frequency Hopping

Bluetooth V3.0 EDR / Human Interface Device (HID)

0 dBm (Class 2)

∅ 8 mm, Laser scanning, 400 dpi

approx. 10 m

2× AAA 1.5 V

3V_DC ± 5%

Operation keyboard: 11.5 mA ±1 mA

Operation mouse: 28 mA ±2 mA

Standby: 3.4 mA (nach 3 Sek.)

Sleep mode: 202\~286 μA ±10 μA

Operating: 0^ C up to +40^ C

Storage: -30^ up to +65^

Operating and storage: 0 % up to 95 % RH

Keyboard, USB Bluetooth adapter KSR-10 BT, 1 pair of batteries, user manual

Black

CE, FCC, WEEE/RoHS, REACH

XP / Vista / Windows7

WIRELESS Bluetooth

Information on disposal of old batteries (Battery Regulation)

The new Regulation obliges battery manufacturers and importers to take back, sort and dispose all old batteries. The consumer is obliged to give back used batteries in retail stores or in municipal collection points. The disposal in municipal waste is explicitly prohibited according to Battery Regulation. You can send batteries purchased from us after consumption to the following address via sufficient stamped mail:

Batteries, which contain pollutants, are marked with the symbol of a crossed-out dustbin, similar to the symbol in the illustration. The chemical description of the pollutant is situated below the symbol of the dustbin. "Cd" stands for Cadmium, "Pb" for Lead, "Hg" for Mercury.

5. Installation KSK-3201 RF

5.1 System requirements

This keyboard requires a PC with USB connection and one of the following operating systems:

Windows XP / Vista / Windows7

For the installation of the keyboard under the mentioned above operating systems you need NO special driver!

5.2 Installation of the USB receiver for KSK-3201 RF

In order to install your keyboard, please perform the following steps:

Take the USB receiver (USB dongle receiver) out of the box. [If you are just not using the keyboard you can store the receiver next to the battery case on the back side of the keyboard.]

Connect the USB receiver to a free USB port on your computer.

Advise: Please ensure, that the USB receiver has a minimal distance of 20 cm to metallic dividing walls, other computer cases, monitors, ZIP drives, loudspeakers and switching power supplies.

Close-up of a printer's internal components including a USB drive and a separate PC (no text or symbols visible)

All mentioned above state-of-the-art operating systems with Plug & Play support will recognize your key-board automatically and load the required drivers. During the phase of installation your operating system informs you via changing Pop-up information windows on the task-bar about the current status of installation. Please be patient, until the system informs you finally about the successful installation. The USB receiver is now ready for operation.

Older operating systems not always support automatic recognition of USB devices. If you have attached your USB receiver and exactly this error occurs on your system, you have the following alternatives to solve the problem:

Perform an update of your operating system and return to Step 5.2•

In some cases the installation CD of your operating system is necessary according to the instructions on • your screen. In this circumstance please follow these instructions*.

- Check whether your BIOS system supports USB keyboards*. Some main board manufacturers offer BIOS up-dates for download over the Internet.

Ensure in your system settings, that the used USB connection was not deactivated in your operating system*.

Should your system updates keep out of success, it is recommended to test the keyboard with another PC with the same operating system to rule out a hardware damage of the USB receiver.

* Refer to the documentation of your PC for details.

5.3 Keyboard installation KSK-3201 RF

Recommended requirement is the successful installation of the USB receiver under point 5.2.

If you haven't done yet, remove the covering of the battery case on the bottom of your keyboard. Install the included batteries of type AAA 1.5 V considering the right polarity in the battery case (see picture).

Close-up of a battery pack with a highlighted component and indicator lights (no readable text or symbols)

Simple grayscale illustration of a cylindrical battery (no text or symbols)

2 x

Switch ON the On/Off sliding switch on keyboard's back side• !

The USB receiver and the keyboard are factory-made already synchronised on the same channel. Nor-• mally you have not to make a new-synchronisation (as described under point 5.4).

Now you can check this by pressing any key of your keyboard. If you press the Windows key, for instance, the Windows Pop-up menu down left on your screen has to open. If so, your wireless keyboard is working correctly now. If not, please synchronise the USB receiver and the keyboard again like described under point 5.4.

Programme Orientalis Grenänkungen System Lfd und Support Apliablen... Heptenheiten... Strg Alt

Advise: Should the functionality be influenced by other users applying their wireless keyboard close-by, make a newsynchronisation as described under point 5.4.

5.4 New-synchronisation of the radio channel KSK-3201 RF

When you install your keyboard for the first time and no connection can be established, please synchronise the radio channel between keyboard and USB receiver again by pressing and holding the keys (Fn + F1) simultaneously. After 2 seconds pairing starts, the pairing LED is blinking. Pairing can take several seconds and is finished, when the LED above the trackball goes off. Now the keyboard is ready for usage. Check now the functionality of the keyboard as described under point 5.3.

Pairing LED

Close-up of a computer keyboard with red annotations pointing to specific keys and buttons

In implausible case the keyboard does not work even after new-synchronisation, you have the following options to solve this problem:

Close-up of a smartphone camera lens with a red arrow pointing to the lens (no text or symbols visible)

Repeat the procedure of synchronisation as described under 5.4.

Sometimes it is necessary to repeat this routine several times, until the right radio channel is found.

In case your USB receiver is attached to an USB hub, you should install it directly on the USB connector of your notebook or desktop.

During the procedure of synchronisation the keyboard should be located close to the USB receiver to make sure, that the immediate environment has no influence on the radio transmission (for instance reduction/interferences due to metal cases, other sources of interferences etc.).

Ensure that you use only batteries with full loading capacity. In case of doubt change the old batteries before next synchronisation against new ones as a precaution. Low battery capacity is signalised by permanent glowing of the blue LED above the trackball.

Low Battery LED

6. Installation KSK-3201 BT

6.1 System requirements

Precondition for the use of the keyboard is that your device (PC, notebook, tablet, handheld, etc.)

is hardware-sided Bluetooth-enabled (e.g. by an integrated Bluetooth module or external adapter)• software-sided (Bluetooth) supports faultlessly the HID profile• software-sided (operating system) supports faultlessly standard keyboard drivers with corresponding country code

Below there are various technical situations:

• End device is hardware- and software-technically already Bluetooth-enabled Skip the further text and follow the instructions under 6.3
• End device is hardware- and software-technically not Bluetooth-enabled Follow the further text

6.2 Installation of the included Bluetooth adapter for KSK-3201 BT

In order to install the Bluetooth adapter, please perform the following steps:

Connect the included USB adapter (KSR-10 BT) to a free USB port on your computer.

Advise: Please ensure, that the USB adapter has a minimal distance of 20 cm to metallic dividing walls, other computer cases, monitors, ZIP drives, loudspeakers and switching power supplies.

Close-up of a black electronic device's cable port with a red arrow pointing to the left side (no visible text or symbols)

All mentioned above state-of-the-art operating systems with Plug & Play support will recognize your USB • adapter automatically and load the required drivers. During the phase of installation your operating system informs you via changing Pop-up information windows on the task-bar about the current status of installation. Please be patient, until the system informs you finally about the successful installation. The USB adapter is now ready for operation.

Older operating systems not always support automatic recognition of USB devices. If you have attached your USB receiver and exactly this error occurs on your system, you have the following alternatives to solve the problem:

Perform an update of your operating system and return to Step 6.2•

In some cases the installation CD of your operating system is necessary according to the instructions on • your screen. In this circumstance please follow these instructions*.

Check whether your BIOS system supports USB keyboards*. Some main board manufacturers offer BIOS updates for download over the Internet.

Ensure in your system settings, that the used USB connection was not deactivated in your operating system*.

Should your system-updates keep out of success, it is recommendable to test the keyboard with another PC with the same operating system to rule out a hardware damage of the USB receiver.

* Refer to the documentation of your PC for details.

6.3 Keyboard installation KSK-3201 BT

Ensure for the further procedure that the used Bluetooth driver software was installed correctly on your PC.

If you haven't done yet, remove the covering of the battery case on the bottom of your keyboard. Insert the included batteries of type AAA 1.5 V considering the right polarity in the battery case (see picture).

MASCENT FREE ① ②

Simple grayscale gradient bar with no text or symbols

2x

Switch ON the On/Off sliding switch on keyboard's back side• !

After connecting the Bluetooth adapter with your PC, the necessary drivers are installed automatically by the Windows' PNP functionality and the blue Bluetooth logo appears at the bottom right corner of the screen.

Now the radio connection must be established between the Bluetooth • adapter and the keyboard (Pairing). Press the keys (Fn + F1) on your keyboard simultaneously. After 2 seconds pairing starts, the pairing LED is blinking. Pairing can take several seconds and is finished, when the LED above the trackball goes off.

Should the pairing process break off (LED goes off) without getting a connection, try it again. Probably, it can be necessary to switch the rear sliding switch off and on again.

Pairing LED

DE NEO BEACH 10:17

A double click with the left mouse • key on the Bluetooth logo opens the menu „Bluetooth devices“.

Click "Add" and "OK".

Alternatively to the just described method, a single click on the Bluetooth logo opens a pull up menu; and after a further click on the option „add Bluetooth devices“ appears the menu (shown in the picture).

Place a tick for „Device is set and can be identified“ •

and click „Continue>“.

Select the identified keyboard, which is shown in the next window (here „BTKB-66EB – New device“) and confirm with „Continue>“. (Attention: here can be listed of course also more Bluetooth devices as shown in our picture)

Type the shown in the menu pass key with the Bluetooth • keyboard and confirm with „Enter“.

Finish the Bluetooth assistant with a final click on „Finish“. The Bluetooth keyboard is now ready for use and functional.

Would you like to use instead of the included Bluetooth USB super-mini adapter another Bluetooth adapter or an integrated Bluetooth module, so please note the following instructions:

- If your PC is running Windows XP (SP2), Vista or Windows7 and the IC of your Bluetooth adapter is from manufacturer CSR, please use the included and preloaded Microsoft Bluetooth driver software. You do not need to install other Bluetooth driver software. If you do not like to use the Microsoft Bluetooth driver software for any reason, you can install optionally Bluetooth driver software Toshiba or BlueSoleil (from software manufacturer IVT). *

If your PC is running Windows XP (SP2), Vista or Windows7 and the IC of your Bluetooth adapter is from manufacturer CSR, please first install the Bluetooth driver software Toshiba or BlueSoleil (IVT). *

If your PC is running Windows XP (SP2), Vista or Windows7 and the IC of your Bluetooth adapter is from manufacturer Broadcom, please first install the Bluetooth driver software WIDCOMM.*

* For details, see the documentation of your PC, your built-in Bluetooth module or your Bluetooth adapter.

Advice:

The most Bluetooth keyboards cannot work under BIOS or DOS environment, because the Bluetooth adapter works only in HID mode (Human Interface Device). For this a dual Bluetooth USB adapter would be necessary, which supports both HID and HCI mode (Host Controller Interface.

7. How to use the keyboards KSK-3201 RF and KSK-3201 BT

After successful launch enjoy now during the operation a free and independent choice of location up to • approx. 7 / 10 m distance to the PC. More or less range can be caused, like mentioned above, by metallic dividing walls, other computer cases, monitors, ZIP drives, loudspeakers, switching power supplies etc., but also by different loading capacity of the batteries.

7.1. Trackball

As a mouse alternative the keyboard is equipped with a Laser Trackball inclusive two mouse function keys allowing comfortable and ergonomic handling of the PC, for instance from a sofa. Thereby the handling of the Trackball is as simple as brilliant.

Move with the right thumb softly the ball of the Trackball to move the cursor on the screen. With the mouse function keys click and double click functions, absolutely identically as with a mouse, can be explained. In order to „drag“, to draw or to mark, you must keep the left key with the left thumb pressed to carry out the function then with the right thumb on the Track Ball. In order to increase or decrease the speed of the Mouse-pointer movements, change the settings of the mouse options in your system control under Windows*. Using notebooks with already integrated touchpad you have to de-activate these intern control devices in case of error messages or malfunctions*. With pressed down • Fn key it is possible to scroll with the track

Move with the right thumb softly the ball of the Trackball to move the cursor on the screen.

With the mouse function keys click and double click functions, • absolutely identically as with a mouse, can be explained.

In order to „drag“, to draw or to mark, you must keep the left key with the left thumb pressed to carry out the function then with the right thumb on the Track Ball.

In order to increase or decrease the speed of the Mouse-pointer movements, change the settings of the mouse options in your system control under Windows*.

Using notebooks with already integrated touchpad you have to de-activate these intern control devices in case of error messages or malfunctions*.

With pressed down • Fn key it is possible to scroll with the track ball up and down.

Should the precision of the cursor decrease after several months of usage, please check the installed batteries for their state. In the case of doubt exchange them for new.

Advise: A too low battery capacity might be responsible for the fact that the operation distance to the radio remote control of the PC is impaired respectively signs are let out sporadically when writing.

7.2 Status LEDs of the keyboards (above the Trackball)

- Low Battery [amber LED (KSK-3201 RF) respectively red LED (KSK-3201 BT) - blinking] It indicates that the battery is below 2.2 Volt (KSK-3201 RF) respectively 2.3 V (KSK-3201 BT). It is blinking, until new battery is installed or the battery is total used up. It is flashing only while the keyboard is not in sleep mode.

- Pairing LED [yellow LED (KSK-3201 RF) / blue LED (KSK-3201 BT) - illuminated] It indicates that the keyboard is in Pairing mode (searching a RF / Bluetooth receiver). When Fn+F1 (Pairing key) are pressed, the LED flashes till a receiver has been found or the relevant computer stops pairing in advance.

7.3. Operating modes of the keyboards

Standby/ Sleep mode*

Standby: after 3 seconds

Sleep mode: after 20 minutes

Wake up mode•

To wake up the keyboard from sleep mode, press any key of the keypad including left or right mouse buttons. It can take up to 4 Seconds until the keyboard wakes up.

7.4. Keys with double functions

Esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 A 1 2 3 4 5 6 7 ( ) 8 ( ) 9 0 1 B \ Q W E R T Z U I S O P U * A S D F G H J K L O A * + Y X C V B N M - - - - Sing Ps Ab AR Gr Sing Fri 1 BB+ Send

The layout of the keyboard is a special space-saving layout with the same virtual numeric keypad also used in notebooks. Press the NumLk key in the top key row in order to switch the virtual numeric keypad function on and off. (Characters depicted in blue are assigned to the keys)

- With activated Num Lock function you can hold pressed the key Fn in the left down corner for the temporary deactivation of the virtual numeric keypad. This is particularly convenient to enter letters quickly apart from numbers.

- Without previous activation of the NumLk key, the pressed down Fn key will control the integrated position keys in the same way as an external keypad (please refer to the picture).

7.4 Multifunctional keys

The keyboard has 12 integrated multifunctional keys for a fast and comfortable operation, as second assignment of the function keys F1 to F12. These keys perform the below described functions when pressing simultaneously with Fn; e.g. open documents or start software programs or web pages.

F1	Pairing	Connects the keyboard with the USB receiver (RF receiver respectively Bluetooth adapter)
F2	Play/ Pause	One-time pressing starts the track of a CD, VCD, DVD or media file; repeated pressing pauses the replay
F3	Stop	Stops the track of the CD, VCD, DVD or media file
F4	Previous track	Starts the previous track of the CD, VCD, DVD or media file
F5	Next track	Starts the next track of the CD, VCD, DVD or media file
F6	Media-Player	Opens the start page of the preset Media Player
F7	E-Mail	Opens the home page of the preset E-mail program
F8	Internet	Starts the default Web browser and goes to the home web page
F9	Mute	Activates or de-activates computer's sound
F10	Volume -	Decreases the computer's sound volume
F11	Volume +	Increases the computer's sound volume
F12	Sleep	Puts the keyboard into sleep mode (only for KSK-3201 RF!)

8. How to clean the keyboards KSK-3201 RF and KSK-3201 BT

Remove dust with a brush, with soft compressed air, or with a vacuum cleaner with brush head nozzle.

Remove fine dirt with a not-too-damp cloth.

DO NOT use any aggressive detergents, solvents or gasoline in order to clean the keyboard.

2. Technical data KSK-3201 RF

Distance effective :

env. 7 m

Type de pile :

2× AAA 1.5 V

Alimentation :

CE, FCC, WEEE/RoHS, REACH

Compatibilité :

XP / Vista / Windows7

WIRELESS RF 2.4 GHz

Distance effective :

Type de pile :

Alimentation :

CE, FCC, WEEE/RoHS, REACH

XP / Vista / Windows7

WIRELESS Bluetooth

5. Installation KSK-3201 RF

Close-up of a printer's internal components including a USB drive and a separate PC interface (no text or symbols visible)

Close-up of a battery pack with a highlighted internal component (no visible text or symbols)

Gray cylindrical battery icon with a small protrusion at the top (no text or symbols)

2 x

Close-up of a smartphone camera lens with a red arrow pointing to the lens (no text or symbols visible)

6. Installation KSK-3201 BT

6.1 Système requis

Close-up of a black electronic device's cable port with a red arrow pointing to the left side (no visible text or symbols)

Simple grayscale gradient cylinder with a small rectangular notch at the top (no text or symbols)

2x