58265 - Cooker UNOLD - Free user manual and instructions

USER MANUAL 58265 UNOLD

Black-and-white photo of a cooking setup with two stovels on an induction cooktop, one containing noodles and the other with meat (no text or symbols visible)

Bedienungsanleitung

Modell 58265

Instructions for use Model 58265

Technical Specifications.... 15

Explanation of symbols.... 15

For your safety.... 15

Control panel....17

Preparing the appliance for operation 17

Operation of the induction burner.... 18

Cooking with the timer 18

Cooking utensil selection 19

Functioning....19

Safety functions 20

Cleaning and maintenance 20

Trouble shooting 20

Guarantee conditions 22

Waste Disposal / Environmental Protection 22

E-Mail [e-mail]

MENAGROS SA

Route der Servion

CH - 1083 Mezières

Telefon [phone]

Telefax [phone]

E-Mail [e-mail]

Internet www.menagros.ch

POLEN TSCHECHIEN

„Quadra-net“ Sp. z o.o.

Skadowa 5

61-888 Poznan Skadowa 5

Internet www.quadra-net.pl

befree.cz s.r.o.

Škroupova 150

537 01 Chrudim

Telefon [phone]

Power: 3,400 watts total (left burner max. 1,800 watts, right burner max. 1,600 watts)

Dimensions: Approx. 64.0 x 36.4 x 7,3 cm

Weight: Approx. 4.24 kg

Power cord

Approx. 150 cm

length:

Housing: Plastic

Cooktop: Heat-resistant, unbreakable glass 2 x 27 x 27 cm cooker size, left burner 18 cm, right burner 16 cm

Features: 7 power settings, 6 temperature settings, overheating protection, indicator lamps for all functions: Cook, Keep warm, ON/OFF, Temperature, Timer

Accessories: Instructions for use

We reserve the right to introduce technical modifications.

EXPLANATION OF SYMBOLS

This symbol denotes a possible hazard which could cause injury or damage to the appliance.

This symbol denotes a possible risk of scalding. Please always be particularly vigilant here.

FOR YOUR SAFETY

General safety information

1. Please read the following information and keep it for future reference.
2. This appliance is not intended for use by persons (including children) with limited physical, sensory or mental abilities or with lack of experience or limited knowledge, unless they are supervised by a person who is responsible for their safety or have been instructed on how to use the appliance.
3. Children should be supervised in order to ensure that they do not play with the appliance.

4. Connect appliance only to an AC power supply to the voltage on the rating plate.

5. Do not operate this appliance with an external timer or remote control system.

6. Persons with pacemakers, especially older models, should ask their doctor before using the appliance, since the function of the pacemaker could be impaired.
7. Connect appliance only to an AC power supply with voltage corresponding to the voltage on the rating plate.
8. When using model 58265, you should not connect any other electrical appliance to the same electrical circuit to avoid overloads.
9. The appliance is intended for household use only, or for similar areas of use, such as:

■ kitchenettes in businesses, offices or other workplaces,
■ agricultural enterprises,
■ for use by guests in hotels, motels or other lodgings,
■ in private guesthouses or holiday homes.

1. Check the plug and the power cord regularly for wear or damage. In case of damage to the power cord, glass cooktop or other parts, please send the appliance for inspection and/or repair to our customer service department (for address, see warranty terms). Unauthorized repairs can result in serious risks to the user and will void the warranty.

2. If the power cord of this appliance is damaged, it must be replaced by the manufacturer or his after sales service department or person with similar qualifications, to prevent hazards. Disconnect the power plug only after the fans in the appliance have stopped turning.

Information on setup and operation of the appliance

1. Place the appliance on a solid, level and dry surface. For safety reasons, never place the appliance on hot surfaces, metal surfaces or surfaces covered with textiles.

2. Maintain sufficient distance to objects which react to magnetic forces, e.g. bank cards, radios, televisions, video cassettes, etc.

3. Do not use the appliance outdoors.

4. Do not immerse the appliance in water or other liquids. Protect the appliance from moisture.

5. During operation, leave sufficient space between the appliance and walls and other flammable objects such as curtains.

6. Do not operate the appliance in the vicinity of heat sources.

7. Before heating, route the power cord so that it does not come into contact with hot parts of the appliance.

8. Installation of the appliance in a worktop is not permitted.

9. Use only pots and pans which are suitable for induction cooking.

10. The appliance heats very quickly. Heating empty pots can damage the appliance and the pots themselves.

11. Switch the appliance on only if a pot with contents is on the burner. Do not overfill pots, to prevent boiling over.

12. Do not leave any metal objects such as knives or forks on the burner, since they could become hot when the appliance is switched on.

13. Do not heat closed metal cans; they could explode.

14. Make sure that the ventilation slots in the appliance are unobstructed at all times.

15. Do not move the appliance while it is in operation. Before moving the appliance, switch it off and remove any pots or pans.

16. Do not allow objects to fall onto the glass cooktop – danger of breakage! If the glass cooktop is cracked or otherwise damaged, do not continue to use the appliance; it must be sent in to our after sales service department for repair.

17. The appliance should not be operated for more than 4 hours continuously. If used longer than this, switch it off for at least 30 minutes in between.

18. The glass cooktop can become hot from the heat radiated from pots or pans. Therefore, do not touch the surface immediately after cooking.

19. Do not drag pots across the control buttons, since they could become damaged.

20. Do not place any objects such as foils, etc. between the pot and the burner.

21. The pot, when filled, should not be heavier than 4 kg to prevent damage to the cooktop.

22. Do not place any hot pots or pans on the control panel.

23. Before moving or cleaning the appliance after use, always switch off and unplug the appliance and allow it to cool.

The glass cooktop can become hot from the heat radiated from pots or pans. Therefore, do not touch the surface immediately after cooking.

The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if repairs are carried out by unauthorized third parties.

1 2 3 4 5 6 7 8 UNOLD

1 Indicator lamp:Cook/Keep warm/Time

2 Minus - button

3 Plus + buttonThe Plus and Minus buttons can be used for time settings, heating power or temperature.

4 Display

5 °C/Watts display

6 Time buttonYou can use the timer to set the cooking duration. The time should not exceed 4 hours without interruption.

7 Function button

8 ON/OFF button

PREPARING THE APPLIANCE FOR OPERATION

1. Remove all packaging materials and transport safety devices.
2. Wipe off the appliance with a damp cloth.

3. Place the appliance on a level, solid and dry surface with sufficient clearance on all sides.

4. Plug the power cord into an electrical outlet.

OPERATION OF THE INDUCTION BURNER

The double induction cooker features two separate burners which can be operated independently of each other. The left burner can be operated at maximum power of 1,800 watts and the right burner at a maximum power of 1,600 watts. If you use the temperature control, the maximum possible temperature for each side is 240^ C.

1. Plug the power cord into an electrical outlet. A signal tone confirms that the appliance has been switched on and the display lights up. Then both displays show -- to indicate that the appliance is connected to the power supply.
2. Place a suitable pot with food to be cooked in the middle of the burner.
3. Press the ON/OFF button. The display shows 00 00.
4. Press the FUNCTION button within 5 seconds. If you wait longer, you will have to switch on the appliance again with the ON/OFF button.
5. You can control the appliance either by the heating power or the temperature. Press the FUNCTION button to switch between the two modes. The power and temperature setting can be changed at any time during cooking by pressing the Plus or Minus button.
6. Heat control: Press the Function button until the indicator lamps "W" and "Cook" light up. The fan starts turning at the same time. The standard setting for the left burner is 1,800 watts and for right burner 1,600 watts. You can change these settings with the Plus and Minus buttons. The following power levels are available:

		Application
Left Right
400 W	400 W Keep warm,steep
800 W	800 W Cook gently

		Application
Left Right
1.000 W	1.000 W B	brown gently and fry
1.200 W	1.200 W B	brown gently and fry
1.400 W	1.400 W B	Brown / fry
1.600 W	1.600 W B	Brown quickly
1.800 W		Grill

1. Temperature control: Press the Function button until the indicator lamps "C" and "Keep warm" light up. The fan starts turning at the same time. The standard setting for both burners is 240°C. You can change this setting with the Plus and Minus buttons. The following temperature levels are available:

Level 1	60 °C	Keep warm
Level 2	100 °C	Cook gently
Level 3	140 °C	Fry gently
Level 4	180 °C	Fry / brown
Level 5	220 °C	Grill
Level 6	240 °C	Grill

1. If there is no pot on the burner, a signal tone sounds at intervals, the display shows E 0 and the appliance automatically switches off after 60 seconds.

COOKING WITH THE TIMER

This function makes it possible to program the appliance so that it automatically switches off after a specified time.

1. First, select the desired function as described above (Heat or Temperature).

2. Press the "Time" button once. The display shows "00:00".

3. Now press the Plus or Minus button within five seconds to enter the desired time. The maximum number of hours that can be set is 23 hours. Enter the minutes following the

same procedure. The maximum number of minutes that can be set is 59 minutes.

1. To confirm the selected time, press the "Time" button again. A short signal tone will sound. The appliance will now automatically switch off after the programmed time, unless you press the FUNCTION button within two hours.
2. If you do not make any settings within five seconds, the time programming is completed and the appliance returns to the initial state.

3. During cooking, both the heat or temperature level and the remaining time are displayed alternately.

4. When the programmed time is reached the appliance automatically switches off.

5. The appliance can be switched off at any time during cooking by pressing the ON/OFF button.
6. The programmed times are not saved at the end of the program or if the program is canceled.
7. The fan continues to run for about 30 seconds after the end of the program.
8. If the program is not controlled by the timer, the appliance automatically switches off after two hours at the latest.
9. After use, unplug the power cord from the electrical outlet to save energy.

COOKING UTENSIL SELECTION

1. Only use cooking utensils, which are approved for induction cooking.
2. Useable pans are: stainless steel saucepans with ferro magnetic bottom. cast iron pans and saucepans, enamelled iron saucepans and pans.
3. You can check with a magnet, if your sauce-pans are useable for induction cooking. Whenever the magnet is adhering at the bottom outside, the saucepan can be used on the induction cooker.
4. Not useable are saucepans and pans made of aluminium, copper, glass, ceramic and some chrome nickel alloys.
5. The diameter of the saucepans should be min. 12 cm and max. 18 cm.
6. Attention:

Adapt the power or temperature setting to the used saucepans. When using small

saucepans you can already cook with 180 °C or 1.400 watts. A too high setting in combination with small saucepans can cause damages of the appliance.

1. The non-stick-coating of coated saucepans and frying pans can be damaged if used with too strong heating. Please follow the information of the saucepan manufacturer with regard to the application of the pots. Choose in the case of doubt a lower power setting or temperature to avoid damages.
2. Put the saucepan always precisely in the middle of the cooking field to avoid error messages and automatic switching off.

FUNCTIONING

Cooking on an induction cooker saves up to 50% of electric power. The cooking time is reduced by up to 30%.

When cooking on an induction cooker, not the hotplate is heated, but the saucepan on it, provided that the bottom is ferromagnetic. The heating is effected by a magnetic alternating field below the hotplate.

The advantages of induction cooking are:

■ Short reaction time, short preheating time, quick and exact heating.

■ Rapid heating, since the full amount of energy is immediately available.
■ Cool hotplate, which is only heated by the heat reflected from the saucepan.
■ Great energy saving of up to 50%.

■ Easy cleaning, as food cannot burn in case of boiling over.

■ High safety: as soon as the saucepan is taken away from the plate, the heat supply is stopped automatically.

SAFETY FUNCTIONS

1. Overvoltage / low voltage protection

When power voltage is too high or too low, the induction cooker will compensate the voltage automatically and will adjust the output power.

2. Overheating protection

When the temperature of the hotplate is too high, the induction cooker will stop automatically and a long buzzer sound will be heard to alert you until the temperature returns to normal (fault E 5).

3. High voltage pulse protection

During operation, when power supply receives a transient high voltage pulse (e.g. lightning strike), the induction cooker will stop automatically and in one minute will resume automatically.

4. Small metal part protection

If small iron metal parts with a diameter of less than 80 mm are detected on the hotplate, the appliance cannot be switched on.

5. Suitable pans

The appliance detects automatically if the used saucepan is suitable for induction cooking or not. If the saucepan is not suitable, a buzzer sound will be heard to alert you until an appropriate saucepan is put on the hotplate (fault E O).

CLEANING AND MAINTENANCE

1. Unplug the appliance and let it cool down before cleaning it.
2. Do not immerse the appliance into water or any other liquid for cleaning.
3. Wipe the surface and the housing with a damp cloth.

4. Do not use any strong or abrasive cleansers or spoges.

5. Do not pour water or any other liquid on the hotplate.

6. If necessary you can use a cleanser or scraper for ceran glass cookers.
7. Please clean the ventilation slots regularly with a soft brush to prevent dust deposits.

TROUBLE SHOOTING

Fault Reason Reaction
E0 No cookware	on the plate, cookware not fitted for induction, cookware not placed correctly in the middle	Only use cookware approved for induction cooking with a diameter of at least 12 cm and max. 26 cm, Place the cookware in the middle of the respective cooking plate.
E1 Power circuit	fault Send the appliance to our technical service for repair.
E2 Temperature	control fault Send the appliance to our technical service for repair.
E3 E4Fault Reason Reaction	Variations of voltage	In case of sudden fluctuations of the voltage cooking is automatically interrupted. After approx. 1 minute cooking is continued.
E5 Too high surface temperature If the surface temperature is too high, an acoustic signal is given and the appliance is shout off automatically. As soon as the temperature has fallen to the normal temperautre range, cooking can be restarted.In order to avoid overheating, we recommended to use low power or temperature settings for small saucepans and medium to hiogh settings for large saucepans .
E6 Overheating due to fan fault As soon as the temperature has fallen to the normal temperautre range, cooking can be restarted.
E7 Overheating due to fault of the temperature sensor	Send the appliance to our technical service for repair.

GUARANTEE CONDITIONS

We guarantee our appliances for 24 months, or in case of commercial use for 12 months, from the date of purchase in case of defects that occur during normal use and are demonstrably due to a factory fault. Within the warranty period we will remedy defective materials or workmanship through repair or replacement, at our option.

Our warranty terms apply only to appliances sold in Germany and Austria. For other countries, please contact the responsible importer. In the event of a claim for remedy of defects, please send the appliance to our after sales service, properly packaged and postage paid, together with a copy of the automatically generated sales receipt, which must show the date of purchase, and a description of the defect. If the defect is covered by the warranty, the customer will be reimbursed for the shipping costs. The warranty does not cover damage from normal wear, improper handling and failure to comply with the maintenance and care instructions. The warranty is void if repairs or modifications are made to the appliance by third parties. Any claims of the end consumer vis-à-vis the retailer are not limited by this warranty.

WASTE DISPOSAL / ENVIRONMENTAL PROTECTION

Our appliances are produced on a high quality level for a long lifetime. Regular maintenance and expert repairs by our after-sales service can extend the useful life of the appliance. If an appliance is defective and repair is not possible we ask you to follow the following instructions for disposal.

Do not dispose this appliance together with your standard household waste. Please bring this product to an approved collection point for recycling of electric and electronic products.

By separate collection and disposal of waste products you help to protect natural resources and ensure, that the product is disposed in an adequate way to protect health and environment.

SPÉCIFICATION TECHNIQUE

CONDITIONS DE GARANTIE

Misure: Circa 64, x 36, 4 x 7, 3 cm

Peso: Circa 4,24 kg