Prostyle+ - Shredder REXEL - Free user manual and instructions

USER MANUAL Prostyle+ REXEL

Exterior view of a modern stainless steel tea maker with open lid and control buttons (no visible text or symbols)

To register and activate the warranty go to www.rexeleurope.com/shredders

ProStyle+

GB Instruction Manual

A B C D I F G J H E

Rexel®

Specifications

	Rexel ProStyle+
Cutting Type	Confetti Cut
Shred Size	4 x 35mm
Security Class	DIN S3
Sheet Capacity (one pass)	12 sheets (80 gsm)
Entry Width	230mm
Product Dimensions	H405 x W225 x D420mm
Rated Voltage/Frequency	230V~50Hz
Rated Current	2 amps

Introduction

Thank you for choosing this shredder from Rexel. We are sure it will serve you well, but please take a little time to read these instructions to ensure you get the best out of your machine.

Safety First

• Please store this instruction manual in a safe place for future reference.
• Please pay close attention to the safety symbols on the top of the shredder and operate the machine accordingly.
• If the shredder needs cleaning, unplug the unit from the power socket and use a damp cloth. NB. Do not use any cleaning products to clean the unit.
• Do not position the unit near to an object that radiates heat.
• Do not place the unit in a damp environment.
  • Take care not to splash any liquid onto the machine.
• Return the product and proof of purchase with receipt to the store at which it was purchased if...
• The power cable or plug is broken.
• The machine malfunctions because liquid was accidentally spilt onto the machine.
• The shredder doesn't operate despite following the guidelines in the manual.
• Make sure the power cable isn't a trip hazard.
• Please ensure the power supply is compatible with the requirements of the machine (230V\~50Hz).
• To avoid risk of injury, do not open the machine's casing to attempt DIY repair. Any attempted repair by an unqualified person will invalidate the warranty.

DO NOT attempt to repair shredder yourself. KEEP OUT OF REACH OF CHILDREN.

Lights and Icons Explained

	LEDs
Auto Cool DownColour of LED Blue Red
Power On/Off Switch
Auto Mode Light
Forward Mode Light
Reverse Mode Light
Cool Down Indicator light lightSleep Mode

Description of product parts

A On/off button (at rear of machine)
B Important safety symbols
© Paper and credit card entry slot
D CD entry slot
E Auto button
F Reverse button
G Continuous forward function
H Pull out bin with viewing window
① Cool down (red light)
CD Bin (not shown)

Shredder Control Panel

ReverseForwardAufo

Safety First

This means you should be careful because long hair can become entangled in the cutting head.

This means don't reach into the feed opening of the cutting head.

This means be careful of ties and other loose clothing which could become entangled in the cutting head.

This means keep children away from shredder.

This means be careful of loose jewelry which could become entangeld in the cutting head.

This means no aerosols.

This means machine is cooling down.

Preparation before use

How to use the shredder correctly:

Take care not to insert fingers, ties or other objects into the entry slot of the shredder.
② We recommend you remove staples and paperclips from paper before shredding and avoid laminated documents, plastic bags etc. from being passed through the shredder. This will prevent damage to the cutters.

3 Do not shred wet paper as it can tangle in the cutters.

4 Do not shred more than the stated sheet capacity in one pass.

5 Do not shred continuously for more than 3 minutes at a time. Running the unit for too long may make the motor overheat. If the motor over heats, allow it to cool down for at least 30 minutes before resuming use.

6 Do not use the reverse(◀◀) function if it's not necessary. Over use of the reverse (◀◀) function can result in shredded paper becoming jammed in the entry slot, which will adversely affect the performance of the shredder.

Correct operating procedure

1 Insert plug into the AC power socket.
2 Check the shredder bin is fully closed.
3 Push the Auto button (💡), the shredder is now ready for use.

Rare Occasions of Jamming

In the unlikely event of the shredder jamming, use the reverse function to unblock the shredder (see Reverse function section).

Alternating between the reverse and continuous forward functions will help unblock the feed area.

Over Heating

If this product is used continuously for long periods of time the shredder may overheat. If this occurs the thermometer symbol on the indicator panel will illuminate.

When the shredder is ready to be used again the thermometer symbol will not illuminate.

Rexel®

Operation

After unpacking the product, pull out the shredder bin and remove the CD shard tray and store externally. Reposition the CD shard tray when you shred CD's to separate waste for recycling.
② Connect shredder to mains supply.
3 Ensure the on/off button on the back of the machine is in the on position (a).
4 To commence shredding, press the central Auto button (e). This sets the shredder into auto mode. The standby symbol will illuminate blue.
5 Insert paper (or credit card) to be shredded into the feed area (c).
6 If the shredder is left in auto mode for more than 2 minutes without being used, the shredder will automatically turn back to standby mode in order to save power.
7 The shredder will automatically 'wake up' from sleep mode when paper is inserted into the shredder mouth. There is no need to press the Auto button (e).

Reverse Function

Should you wish to reverse the shredding direction whilst shredding a document, a reverse button (f) has been fitted for your convenience.
2 By pressing the reverse button the shredding cutters will change direction allowing the retrieval of the document being shredded.
3 The reverse function will only run whilst the button is being pressed. When the reverse button has been released the shredder will revert to Auto mode.

CD and Credit Card Shredding

1 Insert CD to be shredded into the feed area (d).
2 A separate CD tray is provided to collect the shredded CD shards. Ensure that this is correctly mounted onto the bin before shredding CDs or credit cards. CD and credit card shards should be disposed of separately to paper.
3 Empty the CD tray after 8 credit cards or CD's to avoid waste spilling over into the paper waste bin. Remove the CD tray before recommencing to shred paper.

Bin Full

Empty or compress the shredded paper when it reaches the bottom of the viewing window. This will avoid paper spilling over or difficulty in removing the bin when it is too full. Over filling the bin may cause the bin to jam.

Once the bin is empty, replace correctly or the shredder will not function.

Lubrication of the Shredder

Only use Rexel Oil Sheets (2101948 & 2101949) to lubricate. ACCO Brands accepts no liability for product performance or safety when other types or brands of lubricants are used on any part(s) of this machine.

Guarantee

ACCO Brands warrants its products and their parts against defects in materials and workmanship under normal use for a period of 24 months from the original date of purchase.

During this period we will repair or replace a defective product or part subject to the following warranty conditions:

The warranty applies only to defects in materials and workmanship under normal use and does not extend to damage to the Product or parts which result from:-

alteration, repair, modification or service carried out by anyone other than an authorised ACCO Brands service centre.

accident, neglect, abuse or misuse owing to failure to comply with the normal operating procedures for a product of this type.

Nothing in this Warranty shall have the effect of excluding the liability of ACCO Brands in respect of death and personal injury caused by the negligence of ACCO Brands. This Warranty is offered (subject to these terms and conditions) in addition to, and does not affect your statutory rights.

Addifional Guarantee

ACCO Brands guarantees the cutting blades of the shredder to be free from defects in material and workmanship for 7 years from the date of purchase by the original consumer.

* Please note that the cutter blades will be progressively worn down by shredding fastened sheets (staples and paperclips) - this is not covered in the warranty.

These conditions shall in all respects be governed and construed in accordance with English Law and subject to the exclusive jurisdiction of the English Courts.

Rexel®

Spécifications

Dette betyr at maskinen kjøler ned.

GB ACCO Service Division

Hereward Rise, Halesowen, West Midlands, B62 8AN Tel: [phone], Fax: [phone] www.acco.co.uk/service

F ACCO France

Service Après-Vente Tel: [phone], Fax: [phone] [e-mail]

© ACCO Deutschland

Arnoldstrasse 5, 73614 Schorndorf, Germany Tel: [phone], Fax: [phone]

E ACCO Iberia SL

P Isaac Peral 19, 28820 Coslada (Madrid) Tel: [phone], Fax: [phone]

① ACCO Brands Italia Srl

Via Pietro Nenni 13, Settimo Torinese (TO) Tel: [phone], Fax: [phone] [e-mail]

B ACCO Brands Benelux B.V.

Peppelkade 64, 3992AK Houten, Nederland/Les Pays-Bas Tel: [phone], Fax: [phone] [e-mail], www.accobenelux.be

LUX ACCO Brands Benelux B.V.

Peppelkade 64, 3992AK Houten, Nederland/Les Pays-Bas Tel: [phone], Fax: [phone] [e-mail], www.accobenelux.be

NL ACCO Brands Benelux B.V.

Peppelkade 64, 3992AK Houten, Nederland/Les Pays-Bas Tel: [phone], Fax: [phone] [e-mail], www.accobenelux.nl

⑤ ACCO Brands Nordic AB

DK Makadamgatan 5, 254 64 Helsingborg, Sweden

N Tel: [phone], Fax: [phone]

⑤ [e-mail]

LV

EST

LT

cz XERTEC a.s.

SK Kloknerova 2278/24, 148 00 Praha 4 - Chodov, Czech Republic Tel: [phone], Fax: [phone] www.xertec.cz

PL SERWIS ACCO

05-300 Mińsk Mazowiecki, Ul. Grobelnego 4, Polska Tel: [phone], Fax: [phone]

H ACCO Hungária Kft

ZA Rexel Office Products (PTY) Ltd

Crusher Road, Crown Ext.3, PO Box 102, Crown Mines, Johannesburg 2025, South Africa Tel: [phone] [e-mail]

IND GBC Asia Pte Ltd

(PAK) 47 Ayer Rajah Crescent, #05-08/17, Singapore 139947

BD Tel: [phone], Fax: [phone] [e-mail]

UPN GBC-Japan K.K.

14F Harmony Tower, 1-32-2 Honcho, Nakano-ku, Tokyo 164-8721 Tel: [phone], Fax: [phone] [e-mail], www.gbc-japan.co.jp

AUS ACCO Australia

Level 2, 8 Lord Street, Botany, NSW 2019 Tel: [phone], Fax: [phone] www.acco.com.au