PHD 150 B2 - Pressure washer PARKSIDE - Free user manual and instructions

Product Type	High-pressure cleaner
Model	PHD 150 B2
Power Consumption	2100 W
Mains Connection	230 V~, 50 Hz
Rated Pressure	11 MPa
Max Permissible Pressure	15 MPa
Rated Water Flow	5.5 l/min
Max Water Flow	7.5 l/min
Max Inflow Temperature	40°C
Max Inflow Pressure	0.8 MPa
Weight (without accessories)	10.8 kg
Mains Cable Length	5 m
Safety Class	II
Protection Rating	IPX5
Sound Pressure Level	78.2 dB(A)
Guaranteed Sound Power Level	98.0 dB(A)
Vibration	0.496 m/s²
Detergent Tank	Yes (built-in, 0.5 L)
Hose Reel	Yes (integrated)
Included Accessories	Jet gun, turbo dirt blaster, standard Vario nozzle, rotating wash brush, nozzle cleaning needle, cleaning agent, fork spanner
Guarantee	3 years

Frequently Asked Questions - PHD 150 B2 PARKSIDE

What is the maximum operating pressure of the Parkside PHD 150 B2?

The maximum permissible pressure is 15 MPa (150 bar). The rated operating pressure is 11 MPa.

Can I use detergent with this pressure washer?

Yes, the PHD 150 B2 has a built-in detergent tank. To use detergent, operate the standard Vario nozzle in low-pressure mode (tip forward).

How do I store the pressure washer after use?

Drain all water from the unit by disconnecting the water supply and running the device for no more than 1 minute until no water escapes. Store in a frost-free room.

What safety precautions should I take when using the pressure washer?

Always direct the jet away from people, animals, and electrical equipment. Wear protective clothing and safety goggles. Use a residual-current device (RCD) with a rated leakage current not more than 30 mA.

How do I clean a clogged nozzle?

Use the included nozzle cleaning needle to remove debris from the nozzle hole. For tough clogs, rinse with water first.

What is the power consumption of the PHD 150 B2?

The power consumption is 2100 W at 230 V~, 50 Hz. Use a socket protected by a 13 A fuse.

Is the Parkside PHD 150 B2 suitable for commercial use?

No, this pressure washer is designed for private home use only. Commercial use will invalidate the guarantee.

How do I change accessories like the turbo dirt blaster?

Push in the tube or brush and turn in the opposite direction to unlock. To attach, push in and turn until it clicks.

What is the water flow rate of the pressure washer?

The rated water flow is 5.5 l/min, with a maximum of 7.5 l/min. Ensure your water supply provides at least 450 l/h.

How long is the guarantee on the PHD 150 B2?

The guarantee period is 3 years from the date of purchase. Keep your receipt as proof of purchase.

USER MANUAL PHD 150 B2 PARKSIDE

PRESSURE CLEANER PHD 150 B2

GB

PRESSURECLEANER

Translation of original operation manual

HU

MAGASNYOMÁSÚTISZTÍTÓ

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

PL

Areas of Application ....4

General Description......5

Scope of Delivery....5

Functional description....5

Overview....5

Technical data......6

Notes on Safety 6

Explanation of symbols....6

Symbols in the manual....7

General notes on safety....7

Start-up 8

Setting up 9

Mains connection....9

Operation 9

High-pressure / low-pressure

operation....10

Interrupting operation 10

Ending operation 11

Using detergents 11

Cleaning and Maintenance......11

Cleaning....11

Maintenance 12

Storage....12

Waste Disposal and Environmental Protection....12

Guarantee 12

Repair Service....13

Service-Center....13

Service Branch ....13

Trouble shooting ....14

Spare Parts Order......14

Translation of the original EC declaration of conformity .....87

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high quality product.

The operating instructions constitute part of this product. They contain important information on safety, use and disposal.

Before using the product, familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the applications specified.

Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Areas of Application

Only use the pressure cleaner in the following private home areas:

- This equipment is not suitable for commercial use.

Commercial use will invalidate the guarantee.

- To clean machines, vehicles, buildings, work tools, facades, terraces, gardening tools, etc. with a high-pressure water jet.

- Only use with original accessories and spares.

- Cleaning the object according to its manufacturer's information.

- The rotating wash brush is fundamentally not suitable for sensitive and painted surfaces (e.g. automotive paint).

General Description

The diagram of the most important functional elements can be found on the foldout side.

Scope of Delivery

Unpack the pressure cleaner and verify the contents:

• Pressure cleaner with mains cable
• Carrying handle with 2 attachment screws
• High-pressure hose on hose reel
• Holder for mains cable
• Jet gun holder
• Quick connector for garden hose adaptor
• Jet gun
• Turbo dirt blaster
• Standard Vario nozzle
• Rotating wash brush
• Nozzle cleaning needle
• 0.5 | cleaning agent
• Fork spanner
• Instruction Manual

Dispose of the packaging material correctly.

Functional description

The pressure cleaner cleans by means of a water jet, with a choice of high or low pressure operation.

A detergent can be added if this is required. For the functions of the operating elements please refer to the subsequent description.

Ensure that the safety instructions are always observed!

Overview

1 Jet gun

2a Carrying handle

2b 2 attachment screws for carrying handle

3 High-pressure hose on hose reel
4 Hose reel crank
5 Holder for mains cable
6 Mains cable

7 Wheels

8 Strainer frame
9 Water connection

10 On/Off switch
11 Jet gun holder
12 High-pressure fitting (gun)
13 Quick connector for garden hose adaptor

14 Opening of cleaning agent tank
15 Cleaning agent tank
16 Accessories holder
17 Turbo dirt blaster
18 Standard Vario nozzle
19 Rotating wash brush
20 Nozzle cleaning needle
21 Cleaning agent
22 Fork spanner

23 Locking knob

24 Starting lever

Technical data

Pressure cleaner ......PHD 150 B2

Mains connection.....230V\~, 50 Hz

Power consumption ......2100 W

Mains cable length....5 m

Weight (without accessories) .....10.8 kg

Safety class ....☐ II

Degree of protection.....IPX5

Rated/operating pressure (p)......11 MPa

Max. permissible pressure (p max) ...15 MPa

Max. inflow pressure (p in max)...0.8 MPa

Max. inflow temperature (T in max) ...40°C

Pumping rate, water (Q)...... 5.5 l/min

Max. pumping rate, water

(Q max)....7.5 l/min

Sound pressure level

(L_pA) 78.2 dB(A); K_pA = 3.0 dB(A)

Sound power level (LWA)

measured...91.7 dB(A); K_wA = 3.0 dB(A)

guaranteed 98.0 dB(A)

Vibration (a_n) .....0.496 m/s²; K=1.5 m/s²

Do not exceed the maximum permitted network impedance of 0.277 Ohms at the electrical connection point.

The user must ensure that the device is operated only on a power supply network that fulfils this requirement.

If necessary, the local power supply company can be asked for the system impedance.

Technical and optical changes can be carried out in the course of further development without notice. All dimensions, references and information of this instruction manual are therefore without guarantee. Legal claims, which are made on the basis of the instruction manual, cannot thus be considered as valid.

Notes on Safety

This section is concerned with the basic safety rules when working with the pressure cleaner.

Explanation of symbols

Attention!

Before beginning work, familiarise yourself thoroughly with all the operating elements, particularly with how they function and operate. Ask a specialist if necessary.

Attention: Remove the plug from the socket as soon as the power lead is damaged or cut.

Also disconnect the plug from the socket when connecting to the water supply or trying to eliminate leaks.

The pressure cleaner is not suitable for direct connection to the drinking water supply system.

Safety class II

Electric appliances should not be disposed of in the domestic garbage.

CAUTION. pressure cleaners can be dangerous if they are not operated correctly! The jet must never be directed at people, animals, electric equipment connected to the power supply or against the actual pressure cleaner.

Operate the equipment only in an upright and never in a reclined position.

Symbols in the manual

Warning symbols with information on damage and injury prevention.

Instruction symbols (the instruction can be explained at the place of the exclamation mark) with information on preventing damage.

Help symbols with information on improving tool handling.

General notes on safety

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children must be supervised in order to ensure that they do not play with the equipment.
• People who are unfamiliar with the operating instructions are not permitted to use the equipment. The operation of the equipment is not authorised for people under the age of 16.

Working with the equipment

Caution: to avoid accidents and injuries:

CAUTION. pressure cleaners can be dangerous if they are not operated correctly! The jet must never be directed at people, animals, electric equipment connected to the power supply or against the actual pressure cleaner.

• Use the equipment only when standing and on a level, stable base.
• Use the equipment only on a flat, stable surface.
• Do not direct the jet at yourself or others in order to clean clothes and shoes.
• To protect against water or dirt splashing back, wear suitable protective clothing and safety goggles.
• Do not operate the pressure cleaner when other people are in the immediate vicinity, other than they are also wearing protective clothes.
• Take appropriate measures to keep children away from the equipment whilst it is running.
• Do not use the equipment in the vicinity of flammable liquids or gases. Non-observance will result in a risk of fire or explosion.
• Do not spray combustible liquids. Risk of explosion.
• If you come into contact with cleaning agents, rinse with plenty of clean water.
• Store the equipment in a dry place and out of reach of children.

Caution! To avoid damage to the equipment and any possible person injury resulting from this:

• Do not work with damaged or incomplete equipment, or with equipment that has been converted without the approval of the manufacturer. Before initial operation, have a specialist check that the required electrical protection measures are in place.
• Do not operate the equipment if the mains cable, water supply or other important parts such as the high-pressure hose or gun are damaged/leaking.
• Protect the pressure cleaner from frost and dry running.
  • High-pressure hoses, fittings and

couplings are important for machine safety. Use only high-pressure hoses, fittings and couplings recommended by the manufacturer.

• Use only original accessories and do not carry out conversion work on the equipment.
• Please read the notes in the operating instructions on the topic of "maintenance and cleaning". Any measures above and beyond these, particularly opening the equipment, are to be carried out by an authorised electrician. In the case of repairs, always contact our service centre.

Electrical safety:

Caution: to avoid accidents and injuries from electric shocks:

- The plug and socket of an extension cable must be water-tight!

Unsuitable extension cables can be dangerous as people can be harmed by an electric shock!

• Protect the electric plug connections against moisture.
• If there is a risk of flooding, fix the plug connections in an area that is safe from flooding.
• Ensure that the mains voltage matches the specifications on the rating plate.
• Connection to the mains must be carried out by an experienced electrician and meet the requirements of IEC 60364-1.
• The electrical installation shall be according to national wiring rules.

• The device must only be connected to a mains socket via a residual-current circuit breaker (RCD) with a rated leakage current of not more than 30 mA. Fuse: at least 13 ampere.

• Before each use, check the equipment, cable and plug for damage.

• If the power cable for this equipment is damaged, it must be replaced by the manufacturer, a customer service agent of the same or a similarly qualified person in order to prevent hazards.
• Do not pull the plug from the socket by the cable. Protect the cable from heat, oil and sharp edges.
• Do not carry or fix the equipment by the cable.
• Use only extension cables that are protected from spray water and designed for outdoor use. Always fully unroll a cable drum before use. Check the cable for damage.
• Before any work on the equipment, during work breaks and in the case of non-use, remove the plug from the socket.
• The cross-section of the power supply cable must not be less than 2 × 2.5 mm^2 .
• Wear sturdy footwear to protect against electric shock.
• To protect against electric shock, operate the equipment only in an upright position.

Start-up

eping with current regulations a pressure cleaner must never be operated off the drinking water mains supply without a controllable backflow preventer. A suitable backflow preventer in conformity with EN 12729 type BA must be used.

Water that has passed through a backflow preventer is classified as undrinkable. A backflow preventer is available in specialist shops.

- Employ an ordinary garden hose for the water intake and ensure sufficient

length.

- Use the device on a domestic water supply or a water source with a feed rate of at least 450l/h.

Setting up

1. Push the carry handle (2a) into the square tube on the mounting frame. The carry handle (2a) audibly clicks into place. Fix the carry handle (2a) from the back using the two screws (2b) enclosed.
2. Slide the holder for mains cable (5) and the jet gun holder (11) onto the guides on the device housing.
3. Connect the high-pressure fitting (jet gun) (12) to the jet gun (1). Use the fork spanner from the package.
4. Connect the feed hose to the water supply and allow water to escape from the other end of the feed hose with no bubbles, in order to expel the air from the feed hose. Switch off the water tap.
5. Connect the supply hose to the water connection (9) on the equipment using the quick connector for garden hose adapter (13). Always use the filter insert (8) and clean this as required (bayonet fixing).
6. Plug in and turn the turbo dirt blaster (17) or the standard Vario nozzle (18) or the rotating wash brush (19) to connect to the jet gun (1).
7. To change the jet tube (17/18) or the rotating wash brush (19) push in the tube or brush and turn in the opposite direction.

Mains connection

The pressure cleaner you have acquired is already fitted with a mains plug. The equipment is designed for connection to an earthed wall socket with a residual current operated device (RCD switch) at 230 V \~ 50 Hz.

Only operate the pressure cleaner after all the above points have been observed.

1. Ensure that the pressure cleaner is turned off by its ON / OFF switch (10).
2. Insert the mains plug into the mains socket

Operation

Be prepared for the recoil force of the emitted water jet! Ensure that you are standing firmly and that you are holding the gun (1) securely, otherwise you could injure yourself or other people.

Never operate the pressure cleaner with a closed water tap. Dry running will damage the pressure cleaner!

1. Turn on the water tap entirely.
2. Switch on the pressure cleaner with the ON / OFF switch (10). Only ever switch on the pressure cleaner once you have connected all of the water pipes and they do not leak. The motor switches on until the required pressure has built up. After the pressure has built up, the motor switches off.
3. Press the gun (1) starting lever (24). The nozzle operates by pressure and the motor switches back on. Releasing the starting lever (24) causes the equipment to switch off. The system remains pressurised.
4. The turbo dirt blaster (17) produces a rotating water jet and is designed for low water consumption work.

- The standard Vario nozzle (18) produces a flat wide jet particularly suited for large surfaces. Turn the tip of the nozzle left to reduce the width of the jet. Turn the tip of the nozzle right to expand the width of the jet.

In the event of leaks in the water system, switch off the equipment immediately at the on/off switch (10) and disconnect the equipment from the mains at the mains power cord (6). Risk of electric shock! Start afresh with making the water connections (cf. "Start-up / Operation" from point 4.).

If there is still air in the device, please proceed as follows:

To vent the supply hose:

1. Remove the quick connector for garden hose adaptor (13) on the water connection (9) and open the water tap until water comes out with no bubbles.
2. Switch off the water tap.
3. Connect the supply hose to the water connection (9) on the equipment using the quick connector for garden hose adapter (13).
4. Fully open the water tap.

To vent the equipment:

1. Switch on the on/off switch (10) until pressure has built up.
2. Switch off the on/off switch (10).
3. Press the on lever on the gun (1) until the pressure has gone.
4. Please repeat process 5. to 7. a few times until there is no more air in the device.

High-pressure / low-pressure operation

The standard Vario nozzle (18) is designed for either high-pressure or low-pressure operation.

The standard Vario nozzle is set to high pressure by default.

Push the tip of the nozzle forward to change to low-pressure operation.

In this mode (low pressure), the unit will automatically draw in cleaning agent from the built-in tank (cf. "Using detergents").

Push in the tip of the nozzle to change to high-pressure operation.

- Lock / unlock the starting lever (24) of the gun (1) by depressing the locking knob (23). Lock the starting lever (24) to prevent the pressure cleaner from being inadvertently / accidentally started.

Locked

Open

Interrupting operation

• Release the lever of the gun (1).
• During prolonged work intervals turn off the pressure cleaner by its ON / OFF switch (10).

If the equipment falls over, switch off the equipment immediately at the on/off switch (10) and disconnect the equipment from the mains at the mains power cord (6). Risk of electric shock! Only now should the

equipment be returned to an upright position. For your own safety, wait approx. 5 minutes before reconnecting to the electricity.

Ending operation

1. After having worked with a detergent rinse the pressure cleaner with clear water.
2. Release the lever of the gun (1).
3. Turn off the pressure by its ON / OFF switch (10). Disconnect the mains plug.
4. Turn off the water tap.
5. Disconnect the pressure cleaner from the water mains.
6. Pull the lever of the gun (1) to vent the pressure existing within the system.

Using detergents

The pressure cleaner was designed for operation with a neutral detergent based on a biologically decomposable anionic tenside. Other detergents or chemical substances could impair the safety of the pressure cleaner and damage it. Such damage to the equipment is not covered by the guarantee.

Fill/drain detergent:

• To add cleaning agent to the jet, you must first fill the cleaning agent tank (15).
• To remove the cleaning agent tank (15), hold it on the side and push it upwards. You can now pull the cleaning agent tank out of the bottom and side guides on the pressure cleaner. Mind to first remove the induction hose and the cap from the opening of the cleaning agent tank (14) as they will remain on the pressure cleaner.

- To reinstall the cleaning agent tank (15), trace back the above steps.

Working Instructions:

• Operate the standard Vario nozzle (18) in low-pressure mode to automatically add cleaning agent to the water.
• The rotating wash brush (19) is always in low-pressure mode and cleaning agent will thus always be added to the water.
• To operate the rotating wash brush (19) without any cleaning agent, remove the cleaning agent tank (15).

Cleaning and Maintenance

Pull out the power plug before every maintenance operation. This also includes connecting to the water supply or trying to eliminate leaks. There is a risk of electrocution or of injury from moving parts.

Cleaning

Never direct the water jet against the pressure cleaner, nor clean the pressure cleaner under flowing water. This could give rise to the danger of electric shock and damage the pressure cleaner!

Always keep the pressure cleaner clean. Do not use any detergents or solvents.

• Always keep the ventilation slots clean and free.
• Only clean the pressure cleaner with a soft brush or a slightly moist cloth.
• In case a nozzle of the jet tube (17/18) is clogged up, use the nozzle cleaning needle (21) to remove the object from the nozzle.

Maintenance

The pressure cleaner is maintenance free.

Ask our service centre to carry out any work that is not described in these instructions. Use only original parts.

Storage

• Drain all the water from the pressure cleaner.
  Disconnect the unit from the water supply. Press the On/Off switch (10) to turn on the pressure cleaner for no longer than 1 minute until no more water escapes from the jet gun(1) or from the attaching parts (17/18/19). Turn off the unit.
• Protect the pressure cleaner and its accessories from frost when they have not been completely drained of all water.
• Store the pressure cleaner and its accessories in a frost-free room.

Waste Disposal and Environmental Protection

Be environmentally friendly. Return the tool, accessories and packaging to a recycling centre when you have finished with them.

Electric appliances should not be disposed of in the domestic garbage.

Hand the tool in at a recycling centre. The plastics and metal parts can be separated and recycled. Ask your Service Center about this.

Guarantee

Dear Customer,

This equipment is provided with a 3-year guarantee from the date of purchase. In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.

If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it occurred.

If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery.

The guarantee applies for all material and manufacturing defects. This guarantee does not extend to cover product parts that are subject to normal wear and may therefore be considered as wearing parts (e.g. filters or attachments) or to cover damage to breakable parts (e.g. switches, batteries, or parts made of glass).

This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided. The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch.

Processing in Case of Guarantee

To ensure efficient handling of your query, please follow the directions below:

- Please have the receipt and item number (e.g. IAN 12345) ready as proof of purchase for all enquiries.

- Please find the item number on the rating plate, an engraved plate on the front page of your manual (bottom left) or as a sticker on the back or bottom.

- Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.

- After consultation with our customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional

costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you.

We can handle only equipment that has been sent with adequate packaging and postage.

Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect.

Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.

We will dispose of your defective devices free of charge when you send them to us.

Service-Center

Service Great Britain

Tel.: [phone]

(£ 0.10/Min.)

E-Mail: [e-mail]

IAN 78960

Service Branch

Please note that the following address is not a service address. Please initially contact the service centre specified above.

DES UK Ltd.

Unit B7

Oxford Street Industrial Park

Vulcan Road

Bilston, West Midlands WV14 7LF

Trouble shooting

Problem Possible cause Remedy
Pressure cleaner is not operating	ON / OFF switch (10) is turned off	Check ON / OFF switch (10)
	Damaged power supply cable (6)	Switch off the equipment and disconnect from the mains. Check power supply cable (6) for damage. If necessary have the power supply cable (6) replaced by a qualified electrician.
	Mains fault	Check the electrical system for conformity with the data on the rating plate.
Pressure clean-er does not generate any pressure	Air trapped in the pressure cleaner	Switch on the equipment with the jet gun and with no nozzle until bubble-free wa-ter comes out.
	Drop in the water mains pressure	Check the water mains.
Severe pres-sure fluctua-tions	High-pressure nozzle (17) is dirty	Rinse the high-pressure nozzle (17) with water. If necessary clean the nozzle hole with a needle.
Leaks in the water system	Connections not fitted cor-rectly	Switch off the equipment and disconnect from the mains. Reconnect the equipment to the water pipes (cf. “Initial Operation/Set-Up”)
	Water connection (9) leaks	Switch off the equipment and disconnect from the mains. Replace the water con-nection (9) inc. gasket (cf. “Spare Parts”)

Spare Parts Order

When buying parts for the pressure cleaner, use the service address given.

Please enter your machine type and the item number of the part you are ordering.

Item Description Product No.

Jet gun 91097399

3 High-pressure hose....91097400

13 Quick connector for garden hose adaptor 91097401

17 Turbo dirt blaster 91097403

18 Standard Vario nozzle....91097404

19 Rotating wash brush....91097405

9 Water connection w/ strainer frame....91097408

Spis tresci

Wstep....15

Przeznaczenie....15

Opis ogólny....16

Service-Center......26

Pobór mocy....2100 W

Service-Center......62

Service-Center....74

Ochranná trieda....□ ll

Druh ochrany.....IPX5

Service-Center......86