ACS-2020-IG-6C-HW - Power strip Lowell - Free user manual and instructions
Find the device manual for free ACS-2020-IG-6C-HW Lowell in PDF.
User questions about ACS-2020-IG-6C-HW Lowell
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Power strip in PDF format for free! Find your manual ACS-2020-IG-6C-HW - Lowell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACS-2020-IG-6C-HW by Lowell.
USER MANUAL ACS-2020-IG-6C-HW Lowell
text_image
CIRCUIT 1: Three duplex (20A) CIRCUIT 2: Two duplex (20A) CIRCUIT 3: Two duplex (20A) CIRCUIT 4: One duplex (20A) CIRCUIT 5: One duplex (20A) CIRCUIT 6: One duplex (20A) The 6 ft. non-metallic flexible conduit rotates in any direction. Mounting brackets Pigtail leads are tagged according to circuitACS Series Model No.
ACS-2020-IG-6C-HW
AC Power Strip w/Six Circuits
Six-circuit power strip with insulated ground (isolated ground or I.G.) receptacles is made to safely power equipment in installations that require multiple AC power circuits. Features 20 receptacles (10 duplex). Requires 35U panel space (minimum).
FEATURES
POWERRATING: 120VAC, 60Hz, 20A (each circuit)
CHASSIS: 60" x 2" x 2" steel chassis with black powder epoxy finish
TERMINATION: Hardwired non-metallic flexible conduit with pigtail leads rotates in any direction. It can be trimmed in the field if needed.
CIRCUITS & RECEPTACLES: A total of 20 I.G. receptacles (10 duplex) are wired into six independent circuits and grouped as shown in photo. Connections are made via pigtail leads that are tagged according to circuit.
• Circuit 1 powers three (3) NEMA 5-20R I.G. duplex receptacles
• Circuit 2 powers two (2) NEMA 5-20R I.G. duplex receptacles
• Circuit 3 powers two (2) NEMA 5-20R I.G. duplex receptacles
• Circuit 4 powers one (1) NEMA 5-20R I.G. duplex receptacle
• Circuit 5 powers one (1) NEMA 5-20R I.G. duplex receptacle
• Circuit 6 powers one (1) NEMA 5-20R I.G. duplex receptacle
UNIVERSAL MOUNTING BRACKETS: The universal brackets allow for power strip installation in a variety of applications with receptacles facing front, center or rear. Brackets are engineered with multiple mounting points and include two types of hardware to facilitate easy installation in a rack with adjustable or fixed rails, to a wall, or under a desk/counter. The brackets can be mounted so they are exposed for easy access or concealed beneath the power strip for an aesthetically cleaner installation.
CERTIFICATION: ETL Listed in U.S./Canada
ORIGIN: Assembled in U.S.A. with global components
A&E SPECIFICATIONS
The six-circuit power strip shall be Lowell model ACS-2020-IG-6C-HW, which shall feature 20 NEMA 5-20R insulated ground (isolated ground) receptacles (10 duplex) wired into six independent circuits. Circuit one shall have three grouped duplex receptacles; circuits two and three shall each have two grouped receptacles; circuits four, five and six shall each have one duplex receptacle. Termination shall be via a six-foot non-metallic flexible conduit with numbered pigtail leads. The steel chassis with black powder epoxy finish shall measure 60" x 2" x 2". It shall include universal mounting brackets and hardware. The power strip shall be ETL Listed and shall be made in the U.S.A. with global components.
UNIVERSAL MOUNTING BRACKETS: The brackets can be mounted exposed for easy access or concealed for a cleaner install. Includes variety of hardware for versatile installation.
(4) Brackets
text_image
(4) 1/4"-20 x 1/2" screws (4) flat nuts (4) 10-32 x 1/2" screws (4) cage nuts
text_image
mounting bracket exposed mounting bracket concealedRACK w/ ADJUSTABLE RAILS
(side mount): Mount to horizontal side supports with universal brackets, 1/4"-20 screws, flat nuts.
natural_image
Diagram showing two vertical electrical or electrical components with numbered pins and a top connection (no text or symbols)RACK w/ ADJUSTABLE RAILS
(rear mount): Mount to rear rail with universal brackets, 10-32 screws.
natural_image
Diagram of three electrical connectors with socket symbols and a switch, no text or labels presentRACK w/ FIXED POSITION RAILS
(and rear Z-angle bracket): Mount to Z-angle with universal brackets, 10-32 screws, cage nuts.
HOW TO TRIM THE CONDUIT: The 6 ft. non-metallic flexible conduit can be trimmed in the field.
natural_image
Diagram showing a pliers applying material to coiled spring-like fibers with an arrow indicating direction (no text or symbols)1) REMOVE EXCESS LENGTH:
Snip reinforcing rib at desired length. Bend the conduit to expose the cut and carefully cut around the conduit without cutting the wires inside. Remove excess length.
2)REMOVECONNECTOR:
Carefully snip the last rib(s) to loosen the connector from the excess length, then twist/pull to remove it.
3) REATTACH CONNECTOR:
Twist/push the connector to attach it to the shortened conduit.
SERIES SUMMARY
| Power NEMA Model No. | Chassis Rating | Chassis Surge Rating | On/Off Remote Mounting Country Receptacles | Circuits | Length | Profile | Termination | Switch | Suppression | Power Control | Aids | of Origin |
| ACS-1505-SW | 15A | 5 (15A) | 1 | 12" | Standard | 6' Det. cord | Yes | --- | --- | Brackets | U.S. | |
| ACS-1505-SW-SD | 15A | 5 (15A) | 1 | 12" | Standard | 6' Det. cord | Yes | 2-stage | --- | Brackets | U.S. | |
| ACS-1506 | 15A | 6 (15A) | 1 | 20" | Low | 6' Fixed cord | --- | 1-stage | --- | Clips | China | |
| ACS-1506-WW | 15A | 6 (15A) | 1 | 12" | Low | 6' Fixed cord | --- | --- | --- | Screws | U.S. | |
| ACS-1507 | 15A | 7 (15A) | 1 | 12" | Low | 6' Det. cord | --- | --- | --- | Screws | U.S. | |
| ACS-1512 | 15A | 12 (15A) | 1 | 32" | Low | 12' Fixed cord | --- | 1-stage | --- | Clips | China | |
| ACS-1524 | 15A | 24 (15A) | 1 | 60" | Low | 12' Fixed cord | --- | 1-stage | --- | Clips | China | |
| ACS-1524-2C | 15A | 24 (15A) | 2 | 70" | Low | Pigtail leads | --- | --- | --- | Clips | China | |
| ACS-2012 | 20A | 8 (15A) + 4 (20A) | 1 | 32" | Low | 12' Fixed cord | --- | 1-stage | --- | Clips | China | |
| ACS-2024 | 20A | 16 (15A) + 8 (20A) | 1 | 70" | Low | 12' Fixed cord | --- | 1-stage | --- | Clips | China | |
| ACS-2014-HW | 20A | 14 (20A) | 1 | 30" | Standard | 6' Conduit | --- | --- | --- | Brackets | U.S. | |
| ACS-2014-2C-HW | 20A | 8 (15A) + 6 (20A) | 2 | 30" | Standard | 6' Conduit | --- | --- | --- | Brackets | U.S. | |
| ACS-2020-6C-HW | 20A | 20 (20A) | 6 | 60" | Standard | 6' Conduit | --- | --- | --- | Brackets | U.S. | |
| ACS-2020-IG-6C-HW | 20A | 20 (I.G. 20A) | 6 | 60" | Standard | 6' Conduit | --- | --- | --- | Brackets | U.S. | |
| ACS-2020-IG-10C-HW | 20A | 20 (I.G. 20A) | 10 | 60" | Standard | 6' Conduit | --- | --- | --- | Brackets | U.S. | |
| ACS-2024-2C | 20A | 24 (20A) | 2 | 70" | Low | Pigtail leads | --- | --- | --- | Clips | China | |
| ACS-1510-RPC | 15A | 10 (15A) | 1 | 30" | Standard | 6' Det. cord | --- | --- | Yes | Brackets | U.S. | |
| ACS-2010-RPC-HW | 20A | 10 (20A) | 1 | 30" | Standard | 6' Conduit | --- | --- | Yes | Brackets | U.S. | |
| ACS-2018-5C-RPC-HW | 20A | 18 (20A) | 5 | 60" | Standard | 6' Conduit | --- | --- | Yes | Brackets | U.S. | |
| ACS-2018-5C-RPCP-HW | 20A | 18 (20A) | 5 | 60" | Standard | 6' Conduit | --- | 1-stage | Yes (P) | Brackets | U.S. |
Chassis Profile = Standard profile (2" x 2"). Low profile (1.625" x 1.375")
Termination = Det. cord (detachable cord), Fixed cord (cord is attached—cannot be removed). Conduit (non-metallic flexible whip w/pigtail leads), Pigtail leads (leads at ends of chassis—no whip)
Switch = Yes (On/off rocker switch)
Surge Suppression = 1-stage (basic surge protection), 2-stage (surge protection with backup)
Remote Power Control = Some receptacles are controlled by a remote switch or sequencer (ordered separately); (P) indicates compatibility with Lowell P-Series pass-through sequencers.
Mounting Aids = Brackets (multi-hole brackets with hardware), Clips (clips and screws with wire tires), or Screws (power strips can mount to rear of US or USV Series shelves).