Mighty Cyclonic KAVACBA22WA - Vacuum Cleaner Kogan - Free user manual and instructions

USER MANUAL Mighty Cyclonic KAVACBA22WA Kogan

Line drawing of a vacuum cleaner with visible blades and casing (no text or symbols)

Warning: When using an electrical appliance, basic precautions should always be followed, including the following, to reduce the risk of fire, electric shock, or injury.

• Do not leave the vacuum cleaner plugged in when not in use. Unplug it from the outlet before performing cleaning or maintenance.
• To reduce the risk of electric shock, do not use the vacuum cleaner outdoors or on wet surfaces.
• Only use this vacuum cleaner as described in this user guide and only use attachments recommended by Kogan.com.
• Do not use if the cord or plug is damaged. If the vacuum cleaner is not working properly, has been dropped, damaged, left outdoors, or submerged in water, take it to a service centre.
• Do not pull or carry the vacuum cleaner by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the vacuum cleaner over the cord. Keep the cord away from heated surfaces.
• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
• Do not handle the plug or vacuum cleaner with wet hands.
• Do not insert any objects into the openings. Do not use the vacuum cleaner if any openings are blocked. Keep the openings free of dust, lint, hair, and anything that may reduce airflow.
• Keep hair, loose clothing, fingers, and all body parts away from openings and moving parts.
• Turn off all controls before unplugging.
  • Take extra care when cleaning on stairs.
• Do not use the vacuum cleaner to pick up flammable or combustible liquids, such as gasoline, or use it in areas where such substances may be present.
• Hold the plug when rewinding onto the cord reel. Do not allow the plug to whip when rewinding.
• Unplug the vacuum cleaner before connecting the extension tube.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without the dust bag and/or filter in place.

• If the power cord or plug is damaged, cease use immediately and contact help.Kogan.com for support.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure they do not play with the appliance.
• This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved.
• Cleaning and maintenance must not be carried out by children without supervision.
• Switch off the vacuum cleaner immediately if the air intake, floor brushes, or extension tube becomes blocked. Before restarting the vacuum cleaner, remove the substance causing the blockage.
• Remove large or sharp objects from the floor before using the vacuum cleaner to prevent potential damage.

OVERVIEW

Technical diagram of a vacuum cleaner with numbered parts labeled 1 through 6

1 Floor Nozzle
2 Extension Tube
3 Air Intake Slider
4 Suction Hose
5 Suction Hose Connection
6 Handle

Technical diagram of a mechanical device with numbered parts labeled 7 through 12

7 Power Button
8 Dust Container Release Button
9 Cord Rewinder Button
10 Suction Power Adjustment Slider
11 Exhaust Cover Release Button
12 Rear Cover

13

14

Pure mechanical component diagram without any text, numbers, or symbols

13 Crevice Nozzle
14 Upholstery Nozzle
15 Accessory Holder

ASSEMBLY

1. Insert the hose connection into the vacuum cleaner by rotating it until you hear a click. To remove the hose, press the release button on the side of the hose connection and pull it out.

Line drawing of a vacuum cleaner with attached hose, showing mechanical assembly (no text or symbols)

1. Attach the extension tube to the other end of the hose.

Illustration of hands holding a flexible hose with a directional arrow indicating movement (no text or symbols)

1. Attach the floor brush to the extension tube.

Diagram of a mechanical device with a lever and handle, showing motion direction (no text or symbols)

OPERATION

Powering the Vacuum Cleaner

1. Before using the vacuum cleaner, first roll out a sufficient length of the power cord and plug it into the electrical outlet. The yellow mark on the power cable indicates the maximum length that should not be exceeded.

2. To switch the vacuum cleaner on/off, press the 'Power' button.

3. To rewind the power cord, press the 'Rewind' button with one hand and guide the cord with the other to prevent it from whipping and causing damage.

Line drawing of a vacuum cleaner connected to an electrical outlet (no text or symbols)

Suction Power Adjustment

Slide the ‘Suction Power Adjustment’ slider to the left to reduce the suction power, and to the right to increase the suction power.

Air Intake

Slide the ‘Air Intake’ slider downwards to reduce the air intake, and upwards to increase the air intake.

Accessories

Floor nozzle:

The floor nozzle is suitable for both carpets and hard floors. The foot switch allows you to switch between carpet and hard floor modes. A brush and a rubber lip extend from the underside of the nozzle for use on hard floors.

Carpet mode Hard floor mode

Crevice nozzle:

- The crevice nozzle is ideal for cleaning upholstery, inside cars, and all hard-to-reach areas that cannot be accessed with other nozzles.

- The brush nozzle is suitable for cleaning uneven surfaces, furniture, lamps, skirting boards, window ledges, etc.

Simple line drawing of a cylindrical object with a curved internal structure and an arrow indicating direction (no text or symbols)

Upholstery nozzle:

The upholstery nozzle is suitable for cleaning all kinds of upholstery, e.g. sofas, car seats etc.

Line drawing of a mechanical component with a flanged base and cylindrical top (no text or symbols)

Emptying the Dust Container

Empty the dust container when the collected dirt reaches the 'MAX' mark or when the suction power decreases.

1. Switch off the vacuum cleaner and unplug it from the electrical outlet. Always pull on the plug, not the cord, when disconnecting.
2. Release the dust container by pressing the 'Release' button.

Release button

1. Lift the dust container forward out of the vacuum cleaner.
2. When emptying, hold the dust container low over a dustbin.
3. Press the 'Open' button to release the base, allowing the dust to fall into the dustbin.
4. Tap gently to loosen any remaining dust.
5. Close the base securely.
6. Place the dust container back into the vacuum cleaner.
7. Ensure the dust container is securely attached before resuming use.

Open button

CLEANING & CARE

Cleaning the Vacuum Body

• Wipe the vacuum cleaner with a damp cloth to clean it.
• Do not use strong solvents or abrasive cleaning agents.

Cleaning the Motor Filter

1. Turn off and unplug the vacuum cleaner.
2. Remove the dust container.
3. Open the dust container cover and take out the motor filter.
4. Hold the motor filter over a dustbin and gently tap to remove debris for a rough clean.
5. Reinsert the dry motor filter back into its holder.
6. Place the motor filter and its holder back into the vacuum cleaner.
7. Replace the filter cover by hooking it from above first, then press until you hear a click to secure it.
8. Place the dust container back onto the vacuum cleaner.
9. Ensure the dust container is securely attached.

Filter lock

Filter

Note:

Never use the vacuum cleaner without the motor filter in place.

Cleaning the Exhaust Air Filter

The exhaust air filter cleans the air before it leaves the vacuum cleaner. Clean the exhaust air filter as follows:

1. Turn off and unplug the vacuum cleaner. Always pull the plug, not the cord.
2. Remove the dust container.
3. Open the exhaust filter cover.
4. Rinse the filter under cold running water and allow it to dry completely.
5. Reinsert the dry exhaust air filter.
6. Close the exhaust filter cover.

Exhaust filter

Transport and Storage

• Lift and carry the vacuum cleaner using the handle. Never pull or lift the vacuum cleaner by the cord.
• Before storing, rewind the cord by unplugging the vacuum, then press the 'Rewind' button until the cord is fully retracted.
• For space-saving storage, the vacuum cleaner can be stored upright on its rear cover. Hang the extension tube by inserting the floor brush hook into the accessory holder.

Disposal

This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

NOTES

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a fill-in-the-blank placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
[EMPTY]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. Since the OCR output correctly ignores the stylistic line, it complies with Rule 2. Therefore, the OCR result is consistent with the Ground Truth.
[Non-Text]
[Non-Text]
[EMPTY]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Since the OCR output incorrectly rendered a stylistic line as underscores (which should be ignored), this violates the rule. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
[NO TEXT]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line or separator), not a placeholder for text. According to Rule 2, such stylistic/background lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. This correctly represents the absence of any textual content in the GT and correctly ignores it as a hallucination. Therefore, the OCR output should have been empty or contained no text. Hence, the OCR result is consistent with the Ground Truth.
[Non-Text]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. This adheres to the strict requirement to ignore such lines.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. Since the OCR output correctly ignores the stylistic line, it complies with Rule 2. Therefore, the OCR result is consistent with the Ground Truth.
[Non-Text]
(No text)

广力云智慧零售收银系统

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a fill-in-the-blank placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
[EMPTY]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. Since the OCR output correctly ignores the stylistic line, it complies with Rule 2. Therefore, the OCR result is consistent with the Ground Truth.
[Non-Text]
[Non-Text]
[EMPTY]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Since the OCR output incorrectly rendered a stylistic line as underscores (which should be ignored), this violates the rule. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
[NO TEXT]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none exist in the GT, violating the rule to ignore such lines. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line or separator), not a placeholder for text. According to Rule 2, such stylistic/background lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. This correctly represents the absence of any textual content in the GT and correctly matches the visual line as a stylistic element. Therefore, the OCR output should have been empty or omitted this line entirely.
[Non-Text]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. Since the OCR output correctly ignores the stylistic line, it complies with Rule 2. Therefore, the OCR result is consistent with the Ground Truth.
[Non-Text]
(No text)

广力云智慧零售收银系统

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

kogan.com