99-8152 - Kit d'installation auto Metra - Free user manual and instructions

USER MANUAL 99-8152 Metra

Meta VEHICLE APPLICATIONS LEXUS GS 300 1998-2002 GS 400 1998-2002 KIT COMPONENTS Radio Housing Pocket ISO Template Mounting Brackets ISO Snap in Brackets (2) #8 x 3/8" Screws TOOLS REQUIRED KIT FEATURES • DIN head unit provision with pocket • ISO head unit provision with pocket Phillips Screwdriver Small flat blade screwdriver

LEXUS

GS 300 1998-2002

GS 400 1998-2002

Interior view of a car dashboard with air conditioners and control panels (no visible text or symbols)

• DIN head unit provision with pocket
• ISO head unit provision with pocket

Questions?

Call the Help Line: (800)253 TECH

Monday - Friday 9:00 am - 7:00 pm EST

Saturday - Sunday 10:00 am - 4:00 pm EST

INST998152

rev. 020103

1-800-221-0932 • www.metraonline.com

COPYRIGHT© 2002 METRA ELECTRONICS CORPORATION

99-8152

99-8152

99-8152 • Lexus GS 300 / GS 400

Disconnect the negative battery terminal to prevent an accidental short circuit.

Unsnap and remove vent and clock assembly from above climate controls.*

See figure A

Remove (2) screws from behind vent and clock assembly.

See Figure B.

Unsnap and remove ashtray assembly from below radio and remove.*

See Figure C.

Remove (2) screws from behind ashtray assembly.

Remove radio and climate controls as one unit.

Remove left and right bracket from radio and climate controls.

See Figure D.

*Tip: Tape the end of a small flat blade screwdriver and use to pry panel starting from windshield end.

Interior view of a car air conditioner unit with control panel and fan (no visible text or symbols)

Interior view of a car dashboard with control panel and buttons (no visible text or symbols)

Close-up of a car seat with visible seats and a small leaf, no text or symbols present

Close-up of hands assembling or adjusting a mechanical component with visible wiring and components (no text or symbols)

99-8152

99-8152

99-8152 • Lexus GS 300 / GS 400

Two black metal bracket components with mounting brackets, one upright and one tilted (no text or symbols visible)

Close-up of a hand using a screwdriver to adjust or install a mechanical component (no visible text or symbols)

Two mechanical components: a black rectangular housing and a gray rectangular bracket, shown without any text or symbols.

Interior view of a car air conditioning unit (no visible text or labels)

1 Secure the Mounting Brackets to the housing/pocket assembly by snapping securing in place. Insert (2) #8 x 3/8" screws provided into assembly.

See figure A

2 Align the climate control module to the top of the housing assembly. Secure the brackets of the housing assembly to the climate control module with (4) phillips screws previously removed.

See Figure B

3 Slide the DIN cage into the radio opening and secure by bending the metal locking tabs down.

See Figure C

4 Slide the DIN unit into the cage until it is secure.

See Figure D

5 Continue to final assembly.

99-8152 • Lexus GS 300 / GS 400

Secure the Mounting Brackets to 1 the housing/pocket assembly by snapping securing in place. Insert (2) #8 x 3/8" screws provided into assembly.

See figure A

Align the climate control module to the top of the housing assembly. Secure the brackets of the housing assembly to the climate control module with (4) phillips screw previously removed.

See Figure B

Align the holes in the ISO Snap In Brackets with the holes on the head unit. Mount the brackets to the head unit with screws supplied with the unit.

See Figure C

Two black metal bracket components with mounting brackets, shown from different angles (no text or symbols visible)

2

Hand holding a tool interacting with a mechanical device (no visible text or symbols)

3

Exterior view of a black electronic device with ventilation grilles and control buttons (no visible text or symbols)

99-8152

99-8152

99-8152 • Lexus GS 300 / GS 400

Front view of a black automotive air conditioning unit with control panel and display (no visible text or symbols)

4 Slide the head unit/bracket assembly into the radio opening until the side clips engage.

See Figure D

Electronic component with a labeled inset showing a rectangular frame and an arrow pointing to a component (no text or symbols visible)

5 Snap the ISO Trimplate over the head unit.

See Figure E

NOTE: To remove the mounted head unit, unclip and remove the ISO Trimplate. Using a small flat-blade screwdriver, disengage the side clips securing the ISO Snap In Brackets to the housing/pocket assembly.

99-8152 • Lexus GS 300 / GS 400

Diagram showing a probe interacting with multiple parallel lines, no text or symbols present

A) Strip wire ends back 1/2"

B) Twist ends together

C) Solder

D) Tape

1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)
See figure A

2 Re-connect the battery terminal and test the unit for proper operation.

3 Reassemble dash in the reverse order of Dash Disassembly on pages 1.