KAOILHTB24A - Heating Kogan - Free user manual and instructions

USER MANUAL KAOILHTB24A Kogan

Black rectangular portable heater with a 'DO NOT COVER' label and 'kubigan' button, no visible text beyond branding

PREMIUM 2400W 11 FIN OIL HEATER

KAOILHTB24A, KAPOILHT24A

SAFETY & WARNINGS

Ensure to read all instructions in this user guide prior to assembly and first use. Retain this user guide for future reference.

- This heater is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the heater by a person responsible for their safety.

- Adult supervision is required at all times if children are around and to ensure they do not play with the heater.

- Do not leave the heater unattended while it is in use.

- This heater is compatible with voltages between 220–240V and with frequencies of 50Hz and 60 Hz. Ensure the power socket used matches this.

- This heater is intended for indoor use only. Do not use this heater outdoors.

- Do not insert or allow foreign objects to enter the heater as this may cause an electric shock, fire, or damage.

- Do not cover the heater or block any openings to prevent overheating.

- Ensure there is at least a 30cm clearance of the heater from any objects or walls.

- Do not place the heater on carpets.

- Ensure the power cord is fully visible. Route the cord away from high traffic areas to avoid it being tripped over.

- Do not immerse the heater in water or any other liquids or allow liquids to drip into the interior of the heater as this could create an electric shock.

- Do not use this heater in the immediate vicinity of wet areas (for example, baths, showers, swimming pools).

- Do not use this heater near fuel, paint, or any other flammable liquids.

- Ensure the heater is not placed directly below the power socket.

- Ensure the heater is off before connecting to the power socket.

- When unplugging, do not forcibly pull on the power cord. Carefully pull the power cord directly from the power socket.

- Keep the heater and power cord away from other sources of heat, sharp objects, and other items that may result in damage.

- Do not use extension cords with this heater as it may cause overheating and is a fire risk.

- Do not operate the heater with wet hands.

- The heater's surface will become hot when operating. Do not directly touch the heater.

- If the heater or power cord is damaged, stop use immediately and contact help.Kogan.com for assistance.

- Do not attempt to disassemble or repair the heater yourself.

- Ensure the power socket is switched off and the heater is unplugged when it is not in use, being cleaned, or stored.

OVERVIEW

Thermostat Heat setting dial Power indicator logan Storage ring Castors

COMPONENTS LIST

• Heater body (x1)
• Castors (x4)
• Brackets (x2)
  • U-bolts (x2)
• User guide (x1)

BEFORE FIRST USE

Ensure all components are included within the packaging. If any components are missing, contact help.Kogan.com for assistance.

If the power cord or plug is cracked or broken, do not use it and contact help.Kogan.com for assistance.

ASSEMBLY

Before using the heater, the castors must be assembled and attached.

WARNING: Do not use the heater without the castors attached.

1. Place the heater upside down on a clean, flat, dry surface.
2. Unscrew the nuts from the castors then insert two castors into the outer holes on each bracket.
3. Twist and remove the wing nuts from the U-bolts then insert the hooked end of the U-bolts into one of the inner holes of the brackets.

Simple line drawing of a U-shaped tube with a curved arrow indicating rotation (no text or symbols)

Illustration of a hand holding a tool with a pen and a small object above it (no text or symbols)

1. Position and slide the brackets in between the end fins of the heater body. The U-bolts should hook under the circular joints connecting the fins.

Illustration of a hand using a tool to adjust or install a mechanical component, with no visible text or symbols.

1. Rotate and insert the other end of the U-bolts through the remaining inner hole on the brackets. Ensuring the castors are straight, secure the end with the wing nuts.

Pure mechanical diagram showing a rotating component with arrows indicating motion (no text or symbols)

Pure technical line drawing of a mechanical component or assembly without any text, numbers, or symbols

1. Turn the heater into the upright position and wait for 15–30 minutes for the oil inside to settle. After this period, the heater will be ready for use.

OPERATION

IMPORTANT: Before first use, ensure the heater has sat upright for 15–30 minutes to allow the oil inside to settle. Doing so will ensure normal operation.

Placement

Ensure there is at least a 30cm clearance of the heater from any objects or walls.

Powering on

1. Fully uncoil the power cord from the storage ring.
2. Plug the power cord into a power socket and turn on the socket. The heater will turn on and the power indicator will illuminate.

Notes:

• The power indicator will always be illuminated unless the heater is unplugged or has fallen over.
• On repeated use, ensure metal does not become attached onto any part of the power cord before plugging it into the power socket.

Thermostat

Turn the thermostat between the MIN and MAX markers to adjust the temperature of heat being emitted by the heater.

The closer it is turned towards the MAX marker, the hotter the temperature. If the room becomes too hot, turn the thermostat towards the MIN marker. The heater will then automatically enter a cycle of turning on/off to regulate the temperature.

Note:

It is suggested to set the thermostat to MAX first before turning towards the MIN marker as required.

Heat settings

This heater features four heat settings. Turn the heat setting dial to the desired setting. Higher settings will lead the heater to emit more heat, heating rooms at a faster rate.

Symbol	Heat setting
0	Off
I	Low heat
II	Medium heat
III	High heat

Powering off

Turn the heat setting dial back to '0' and turn off the power at the socket.

CLEANING & CARE

Ensure the heat setting dial is set to '0', and that the heater is switched off, unplugged, and completely cooled before cleaning or storing.

Cleaning

Wipe the exterior with a clean dry cloth.

Note:

Do not clean the heater with water or any other liquids.

Storage

Wrap the power cord around the storage ring and store the heater in a cool dry place, away from children and metal objects.

Notes:

• Do not place heavy objects on top of the heater as this may result in damage.
• Do not allow the power cord to come into contact with sharp objects and do not allow it to be pressed down.

NOTES

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a fill-in-the-blank placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
[EMPTY]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. Since the OCR output correctly ignores the background/stylistic line and produces no actual text, it complies with the “Stylistic/Background Lines (Ignore)” rule. Therefore, the OCR result is consistent with the Ground Truth.
[Non-Text]
[Non-Text]
[EMPTY]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Since the OCR output incorrectly rendered a stylistic line as underscores (which should be ignored), this violates the rule. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line or separator), not a placeholder for text. According to Rule 2, such stylistic/background lines must be ignored by the OCR result. The OCR content provided is "", which consists of no characters. This correctly represents the absence of any textual content in the GT and correctly matches the visual line as a stylistic element. Therefore, the OCR output should have been empty or omitted this line entirely.
[Non-Text]
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, continuous horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
[Non-Text]
The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Since the OCR output incorrectly rendered a stylistic line as underscores (which should be ignored), this violates the rule. Therefore, the OCR result is inconsistent with the Ground Truth.
[Non-Text]
(No text)

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none should exist in the GT. This adheres to the strict requirement to ignore such lines.

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

kogan.com