KBIO2795 - Wood stove Kunft - Free user manual and instructions

USER MANUAL KBIO2795 Kunft

We thank you for purchasing this product.

This appliance was submitted to several laboratorial tests, which certify its quality. To simplify the use of this appliance, this instruction manual has been provided.

The instructions must ensure a quick and safe use.

Please read carefully the instructions and safety measures described in this manual.

We wish our clients great satisfaction in using their new appliance.

2

electric oven KBIO2795 EN

electric oven

KBIO2795

EN

INDEX

1. SAFETY INSTRUCTIONS ...... 4

1.1. Power Supply 5
1.2. Power Cord and Other Cables ...... 6
1.3. Humidity and Water 6
1.4. Cleaning 6
1.5. General Precautions ...... 6

1. OPERATING INSTRUCTIONS (supplier) ...... 10

2.1. Product Description.... 10
2.2. Using the Product 10
2.3. Maintenance 13

1. TECHNICAL SPECIFICATIONS .... 13

2. POST-SALE SERVICE 14

3. ENVIRONMENTAL PROTECTION 14

kunft.®

1. SAFETY INSTRUCTIONS

	WARNING
	Risk of Electric ShockDo Not Open
Warning: to avoid the risk of electric shock, do not remove the cover.The interior does not contain any parts that can be repaired by the user. Ask for assistance by qualified personnel.

Important Warnings

Before using your appliance read this instructions manual carefully and keep it in a safe place as you may need to consult it in the future.

Before turning on your appliance, and to ensure a safe and correct operation, do not use if:

• It has fallen to the ground;
• You notice any evidence of damage;
• Any anomaly occurs during its operation.

To avoid hazards or deterioration of your appliance through incorrect use it is advisable to read these instructions thoroughly.

Your appliance may not be used for other purposes than the ones intended and solely for household use. Any damage resulting from using the appliance outside this scope, any incorrect use, as well as any ma-

nual modifications to the product will not be covered and automatically voids the warranty.

Assistance

In case of malfunction, take your appliance to a qualified technician for assistance.

This appliance can be used by children from the age of 8 and by people with reduced physical, sensorial or mental capabilities and/or lack of experience and knowledge if they have been given instructions on using the appliance safely and if they understand the hazards involved. Children may not play with the appliance. Cleaning and maintenance must not be carried out by children without supervision.

These instructions are also available at www.suporteworten.pt

1.1. Power Supply

Make sure the main voltage is compatible with the appliance's. If this is not the case please consult the Customer Support Service.

kunft.

1.2. Power Cord and Other Cables

Do not tangle the cord or pull it to disconnect the appliance. Also, keep the cord away from warm surfaces.

Never use the appliance if it has a damaged cable or socket.

Take it to the Technical Support Service for replacement.

1.3. Humidity and Water

Do not use your appliance in humid places. Do not allow the appliance to become wet under any circumstances as this may be dangerous. To avoid fire hazard or electric shock do not expose your appliance to humidity or water. Furthermore, do not place your appliance under water (e.g. for cleaning).

1.4. Cleaning

Before cleaning, be sure to switch off the appliance and remove the plug from the main power supply. Always allow the unit to cool down before cleaning.

To clean the exterior of the product use a dry soft cloth only.

1.5. General Precautions

• Please follow the instructions in the user manual which help to properly install and operate this product and enjoy its advanced features. Please keep the instructions for future reference.
• Read all instructions before using the product.

electric oven

KBIO2795

EN

- Maintenance and service operations are only to be carried out by authorized professionals.

- Any damage caused by manual modifications to the product is not covered by the warranty.

- If this product is used for other purposes than the ones originally intended, or if it is not correctly connected, the product may become damaged and the warranty will be voided.

- When the oven is switched on for the first time, it may give off an unpleasant smell. This is caused by the bonding agent used for the insulating panels within the oven. This is completely normal, if it does occur, just wait for the smell to clear before putting food into the oven.

- During use, the appliance becomes very hot. Exercise care to avoid touching heated elements inside the oven.

- Ensure that the appliance is switched off before replacing the oven light, to avoid the risk of an electric shock.

- The disconnection device must be built into the fixed wiring in accordance with the wiring specifications.

- Power supply cord conductors must have a nominal cross-section of at least 3G 1.5mm^2 .

- Do not use the oven unless you are wearing something on your feet. Do not touch the oven with wet or damp hands or feet.

kunft.

- The oven must be used for the purpose which it was designed for only; it must only be used to cook food. Any other use, such as a form of heating, is a breach of use and is therefore dangerous. The manufacturer shall not be held liable or responsible for any damage to property caused by incorrect use. A few basic rules must be followed when using any electrical appliance.

- Do not use the power cord with an adapter, power board or extension cable.

- If the cable is damaged, it must be replaced promptly by a qualified technician.

- If the oven breaks down or develops a fault, switch it off from the mains and do not touch it. Please contact the Customer Service Centre.

- If the cable shows any damage, it must be replaced promptly. When replacing the cable, follow these instructions.

- Remove the power cable and replace it with one H05VV-F or H05V2V2-F type.

- The cable must be able to support the electric current required by the oven.

- Cable replacement must be carried out by properly qualified technicians. Parts of the appliance may remain hot for a long time; you must wait for it to cool down before touching the parts that are directly exposed to heat.

electric oven KBIO2795 EN

electric oven

KBIO2795

EN

• The earth cable (yellow-green) must be 10 mm longer than the power cable.
• The heat resistance temperature of the power cord is over 700 °C. The power cord should be connected using a double switch which must be at least 250V and 20A (no need to connect using a plug).

9

kunft®

2. OPERATING INSTRUCTIONS (supplier)

2.1. Product Description

0 20 130 40 150 60 80 0 20 50 180 250 290 150 +10

Function Knob Timer Knob Temperature Knob

Symbol Function Description

Oven light: allows the user to observe the cooking progress without opening the door.

Upper cooking element: The upper heating element is on for this function.

Conventional: The top and bottom work together for conventional cooking. The oven needs to be pre-heated to the required temperature and is ideal for single items, such as large cakes. Best results are achieved by placing the food in the centre of the oven.

Lower cooking element: A concealed element in the bottom of the oven provides a more concentrated heat to the base of the food without browning. This is ideal for slow cooking dishes such as casseroles, stews, pastries and pizzas, which require a crispy base.

2.2. Using the Product

Introduction

For the oven to work correctly, the kitchen unit housing must be suitable. The kitchen unit panels that are next to the oven must be of a heat resistant material. Make sure that the adhesives of veneered wood units can withstand temperatures of at least 120 °C. Plastics or adhesives that cannot withstand such temperatures will melt and deform the unit. Once the oven has been fitted inside the unit, the electric parts must be completely insulated. This is a legal safety requirement. All guards must be firmly fixed in place so that it is impossible to remove them without using special tools. Remove the back of the kitchen unit to ensure an adequate air flow circulating around the oven. The hob must have a rear gap of at least 45 mm.

electric oven

KBIO2795

EN

How to Use

• Turn on: When the oven to be used in the “☐”, the food may catch fire if the cooking time is set too long. Close supervision is necessary during grilling and the time should not be set too long.
• NOTE: For cooking times under sixty minutes, first set to a longer time and then turn the switch back to the time you need.
• To set functions, turn the function knob to the required position.
• The oven will automatically start cooking after the function, time and temperature are set.
• To set the cooking time, turn the timer knob to the time required for your recipe. When the cooking time is up, the unit will "buzz" when it stops.
• To set the temperature, turn the temperature knob. If the unit is not in use, always set the knobs to "0".

Fitting the Oven into the Kitchen Unit

Fit the oven into the space provided in the kitchen unit; it can be fitted underneath a work top or into an upright unit. Fix the oven in position by screwing it into place using the two fixture holes in the frame. To locate the fixture holes, open the oven door and look inside. To allow adequate ventilation, the measurements and distances must be respected when fixing the oven.

Accessories

Simple line drawing of a rectangular grid structure with vertical lines (no text or symbols)

Oven shelves: for dishes, baking trays and roasting tins for baking, roasting and grilling.

Technical line drawing of an oven with internal structure and mounting holes (no text or symbols)

Pure technical line drawing of a rectangular device with internal grid lines (no text or symbols)

Universal grill pan: to cook large quantities of food, such as moist cakes, pastries, frozen food etc., or to collect fat/spillage and meat juices.

To make sure the oven shelves are securely positioned, they must be placed between the side grooves. This will guarantee that hot food items will not slide out during the removal of the tray or tin.

kunft.®

Changing the light bulb: the bulb is a special heat resistant light bulb (240V\~25W). To change it, proceed as follows:

1. Turn off and unplug the appliance, or switch off the unit's mains circuit breaker.
2. Unscrew the covering glass and replace the bulb with a new one of the same type.
3. Screw the glass cover back in place.

Simple line drawing of a light bulb with a circular arrow indicating rotation (no text or symbols)

Installation

Installation 490 560 50 80 100 250 600 568 min. 560 25 600 850 595 572 595

Securing the Oven to the Unit

1. Fit the oven into the unit recess.
2. Open the oven door.
3. Secure the oven to the kitchen unit using the two "A" anchors which fit the holes in the oven frame and fit the two "B" screws.

Technical diagram showing a mechanical assembly with labeled parts A and B, no readable text or symbols present.

Ventilation

When cooking finishes, the cavity temperature is over 70 degrees. The ventilation will continue running for 15 minutes after the oven has stopped cooking.

Technical line drawing of an electronic device with ports and wiring, showing internal components and a close-up inset (no text or symbols)

electric oven KBIO2795 EN

KBIO2795

EN

Oven connection

Ventilation

2.3. Maintenance

Cleaning

• To keep the appliance in good and reliable condition, keep it clean. The unit's modern design keeps maintenance to a minimum. The parts of the unit which come into contact with food must be cleaned regularly.
• Before any maintenance and cleaning, disconnect the power. Set all controls to the OFF position.
• Wait until the inside of the unit is not hot, but still slightly warm - cleaning is easier than when it is hot.
• Clean the surface of the unit with a damp cloth, soft brush or fine sponge, and then wipe it dry. In case of heavy soiling, use hot water with a non-abrasive cleaning product.
• To clean the oven's glass door, do not use abrasive cleaners or sharp metal scrapers, these can scratch the surface or damage the glass.
• Never leave acidic substances (lemon juice, vinegar) on stainless steel parts.
• Do not clean the unit with a high-pressure cleaner. The baking pans can be washed with mild detergent.

3. TECHNICAL SPECIFICATIONS

Brand name KUNFT

Model 65CME10006

Energy efficiency index (EEI cavity) 106

Energy class A

Energy consumption per cycle in conventional mode 0.89 kWh/cycle

Number of cavities 1

Heat source per cavity Electricity

Volume of each cavity 70 L

kunft.®

4. PoSt-SalE SErVlcE

KUNFT has designed this appliance in order to guarantee maximum reliability. However, if a problem occurs do not attempt to open the appliance - there is a risk of electrical shock. If you are not able to solve the problem, please contact the Costumer Support Service of any Worten, Modelo or Continente store in order to be assisted. Worten Equipamentos para o Lar provides a 2-year warranty for manufacturing defects from the date of purchase of the appliance.

WARNING: Any attempt to repair the appliance without contacting the manufacturer or seller will void the warranty.

All users must be familiar with these instructions. Knowing what could go wrong can help prevent problems from occurring.

5. ENViroNMENtal ProtEctIoN

In order to protect the environment we strive to reduce the volume of packaging used, limiting it to three easily sorted materials: cardboard, paper and plastic. The appliance is manufactured using recyclable materials after disassembled by a specialized company. Please comply with local regulations concerning the recycling of all materials.

Simple line drawing of a rectangular grid structure with vertical lines (no text or symbols)

Pure geometric diagram of a rectangular frame with internal diagonal lines and no text or symbols

Technical line drawing of a two-wheeled oven or oven unit (no text or symbols)

Diagram showing a light bulb with internal structure and a circular arrow indicating rotation (no text or symbols)

Instalación

Instalacion 490 560 50 80 100 250 600 568 min. 560 25 600 850 595 572 595

Technical diagram showing a mechanical assembly with labeled components A and B, including directional arrows and a circular component.

kunft.®

Ventilación

Technical line drawing of an electronic device with internal components and a close-up inset showing two terminal blocks (no text or symbols present)

Conexión del horno

Simple line drawing of a rectangular grid with vertical lines, no text or symbols present

Pure geometric diagram of a rectangular frame with internal diagonal divisions (no text or symbols)

Technical line drawing of a cabinet or oven with internal structure (no text or symbols)

Diagram showing a light bulb with internal structure and a circular arrow indicating rotation (no text or symbols)

Instalação

Instalação 490 560 50 80 100 250 600 568 min. 560 25 560 600 850 595 572 595

Diagram showing a mechanical assembly with labeled components A and B, including directional arrows and a magnified view of the internal structure.

Technical line drawing of an electronic device rear panel with internal components and a close-up inset showing terminal connectors (no text or symbols)

Ligação do forno

Color palette bar with grayscale shades and a central crosshair symbol (no text or labels)

NOTES / NOTAS

41

kunft® 42 Forno-4F-KBIO2795-Manual-1.indd 42 17/07/17 18:45

43 Forno-4F-KBIO2795-Manual-1.indd 43 17/07/17 18:45

kunft.®

electric oven

is perfectly enough

KBIO2795