SW632 - Sound system AmpliVox - Free user manual and instructions

Product Type	Portable Public Address (PA) Sound System
Model	SW632
Brand	AmpliVox
Speaker Type	Full-range speaker with amplifier
Dimensions (H x W x D)	15.5 x 10.6 x 7.9 inches (394 x 269 x 201 mm)
Weight	12.5 lbs (5.7 kg)
Power Supply	AC 100-240V 50/60Hz via included adapter; internal rechargeable battery
Battery Life	Up to 8 hours at moderate volume
Wireless Connectivity	Bluetooth 5.0 for audio streaming
Inputs	1/4" microphone input (XLR/TS combo), 3.5mm AUX input, USB port for media playback
Outputs	1/4" line out for external speakers
Controls	Volume, master EQ, microphone volume, echo effect
Indicators	Power LED, Bluetooth LED, battery charge LED
Enclosure Material	ABS plastic with metal grille
Carrying Handle	Yes, built-in telescopic handle with wheels
Mounting Options	Floor stand compatible (1-3/8" pole mount)
Maintenance	Clean with dry cloth; do not use liquids or abrasive cleaners
Safety	Do not open casing; no user-serviceable parts inside. Keep away from water and heat sources
Spare Parts and Reparability	Contact authorized AmpliVox service center for repairs and genuine parts
Climate Range	Operating temperature: 32-104°F (0-40°C); storage: -4-140°F (-20-60°C)
Certifications	CE, FCC, RoHS

Frequently Asked Questions - SW632 AmpliVox

How do I pair my smartphone with the SW632 via Bluetooth?

Ensure the SW632 is powered on and Bluetooth is enabled. Press the Bluetooth pairing button until the LED flashes. On your phone, select 'AmpliVox SW632' from the Bluetooth menu. The LED will turn solid when paired.

What audio sources can I connect to the sound system?

You can connect a wired microphone to the 1/4" combo input, a phone or MP3 player via the 3.5mm AUX input, a USB drive with MP3 files, or stream wirelessly via Bluetooth.

How long does the battery last, and how do I charge it?

The internal rechargeable battery provides up to 8 hours of playback at moderate volume. Charge using the included AC adapter; the battery LED will indicate charging status.

Can I connect external speakers to the SW632?

Yes, the SW632 has a 1/4" line out that can feed an external powered speaker or a passive speaker with an amplifier.

Is the AmpliVox SW632 waterproof?

No, the SW632 is not waterproof. It is designed for indoor or covered outdoor use. Avoid exposure to rain, splashes, or high humidity to prevent damage.

What is the weight and dimensions of the SW632?

The unit weighs 12.5 lbs (5.7 kg) and measures 15.5 x 10.6 x 7.9 inches (394 x 269 x 201 mm). It features a telescopic handle and wheels for easy transport.

How do I adjust the echo effect on the microphone?

Locate the 'Echo' control on the control panel. Rotate clockwise to increase the echo effect and counterclockwise to decrease it. For a dry sound, turn it fully counterclockwise.

Can I use the SW632 while it is charging?

Yes, the SW632 can be operated while connected to the AC power supply. This does not harm the battery or the system.

What should I do if the unit doesn't turn on?

First, check that the AC adapter is properly connected and the power outlet is active. If using battery, press the power button for 2 seconds. If still no power, try charging the battery for a few hours, then try again.

How do I clean and maintain the SW632?

Wipe the exterior with a soft, dry cloth. Do not use any liquids, sprays, or abrasive cleaners. For the speaker grille, use a gentle vacuum attachment to remove dust. Store in a cool, dry place.

USER MANUAL SW632 AmpliVox

Wired / Wireless Half Mile Hailer PA System

Two professional lighting equipment setup with tripod-mounted screens and a black suitcase beside it (no visible text or symbols)

IMPORTANT SAFETY INSTRUCTIONS

Before using this product, read the instruction manual for important safety information. Please retain this manual for future reference and warranty information.

Troubleshooting & Servicing

Do not attempt to service or repair the device yourself. Refer all servicing to qualified service personnel. Do not attempt to modify the device in anyway. Doing so could invalidate your warranty.

Cleaning

When cleaning the device, please use a soft, dry cloth. Never use benzene, paint-thinner, or other chemicals on the device.

Location

Place the device in stable location, so it will not fall causing damage to the device or bodily harm.

Intended use

The product may only be used with the original parts intended for it. The intended use includes adherence to the specified installation instructions. The manufacturer accepts no liability for damage arising due to improper use.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in this owner's guide.

IMPORTANT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The unit's circuitry may cause interference to nearby radios. To prevent interference, either switch the unit off or move away from the affected radio.

NOTE: This equipment complies within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.

PACKAGE CONTENTS

Model SW630

• One SW610A Half Mile Hailer
• One S1264 Horn Speaker
• One 40 Ft. Speaker Cable
- Two S1090 Tripods
• One S1960 Nylon Rolling Case
• Wireless 16 CH UHF Transmitter
• Headset and Lapel Microphones

Model SW632

• One SW610A Half Mile Hailer
• One S1264 Horn Speaker
• One 40 Ft. Speaker Cable
- Two S1080 Tripods
• One S1960 Nylon Rolling Case
• Wireless 16 CH UHF Transmitter
• Headset and Lapel Microphones

Model SW635

• One SW615A Half Mile Hailer
• One S1264 Horn Speaker
• One 40 Ft. Speaker Cable
- Two S1090 Tripods
• One S1960 Nylon Rolling Case
- Wireless 16 CH UHF Handheld Microphone

Model SW637

• One SW615A Half Mile Hailer
• One S1264 Horn Speaker
• One 40 Ft. Speaker Cable
- Two S1080 Tripods
• One S1960 Nylon Rolling Case
- Wireless 16 CH UHF Handheld Microphone

SPECIFICATIONS

Amplifier System

Wireless System Models

INSTALL BATTERIES

Battery Power

1. The amp uses 10 "D" size Alkaline batteries (not included); or the optional rechargeable AmpliVox NiCad Battery Pack (S-1465) and (S1460) AC adapter -purchase separately (Fig 3).
2. The removable battery door on the back of the amp is designed to stay closed until you need to change the batteries. Slip a finger nail under it and slide it out. (Fig 1)
3. Lift the battery holder out. The plastic dividers between the batteries help prevent battery corrosion. (Fig 2)
4. Install 10 fresh Alkaline "D" size batteries. Be sure to observe the polarity when putting batteries in the battery compartment. The negative (flat) ends go against the springs. (Fig 2) Carefully replace battery holder. Batteries should look like they are standing up.

DO NOT MIX BATTERY TYPES OR ATTEMPT TO RECHARGE ALKALINE BATTERIES. EQUIPMENT DAMAGE, SAFETY HAZARD OR FIRE COULD RESULT.

Note: The battery holder cable comes from the factory already plugged into the connector. If it comes loose, push it in securely. (Turn the plug over if it doesn't fit; it only fits one way.)

1. Slide door back into place.
2. If using the S-1465 NiCad Battery pack (Fig 3),

Fig 1

Exterior view of a black electronic device labeled 'Anpr/Vox' (no additional text or symbols visible)

Fig 2

Interior view of an electronic battery pack with four batteries and a yellow cable (no visible text or symbols)

Fig 3

Two electronic devices: a white power adapter and a black-and-white charging plug, both with visible wiring (no text or symbols on the devices themselves)

AMPLIFIER FEATURES

4. Mic Volume- controls all 3 mic inputs 5. Dynamic Mic Jack—1/4" for wired, hand-held mic. 6. Auxiliary Volume— controls the auxiliary input separately from the mic volume 7. Tone Control— for auxiliary input; counter- clockwise for more bass; clock- wise for more treble 3. Siren Button 2. Power Indicator Light 1. Power Switch 16. Wireless Channel Selector Models SW312 / SW314— on side 15. Wireless ON/OFF Switch Models SW312 / SW314 14. DC In Jack — plug in optional Universal AC Adapter/ Recharger for power. 13. Aux Out - for optional 12-15 volt accessory. 12. Condenser Mic Jack - 3.5mm for lapel or headset mic. 11. Wireless Mic Jack -3.5mm for optional wireless receiver 10. Auxiliary Line In— 3.5mm add music with a tape player, CD or MP3 player 9. Line Out—3.5mm record your presentation with a tape recorder or a computer sound card 8. Left & Right Speaker Jacks— 1/4 " 17. Wireless 16 Channel UHF Bodypack Microphone Transmitter Channels selected must match

1. Power Switch.
2. Power Indicator Light. Turns red when power is turned on.
3. Siren Button. Single - Variable tone @125 dBL. Push and hold.

4. Mic Volume Control. This knob con-

5. Left & Right Speaker Jacks. Two separately amplified speaker jacks allow you to use one or two speakers for additional sound power or true stereo output.

6. Line Out Jack. Can be used with a tape recorder The Line Out Jack outputs all the sound from the 3 microphone inputs and the

wo sepa- 13. Aux Out. For optional 12-15 volt accessory.
14. DC In Jack. Used for the 12V Battery Cable, 12V Power Plug or the optional International AC Adapter/Recharger, plug it in here. Plug the other end into a wall / floor outlet.
13. Aux Out. For optional 12-15 volt accessory.
14. DC In Jack. Used for the 12V Battery Cable, 12V Power Plug or the optional International AC Adapter/Recharger, plug it in here. Plug the other end into a wall / floor outlet.

WIRELESS HANDHELD MICROPHONE—MODELS SW635 / SW637

① ② ③ ④ ⑤

Functions

1) Interchangeable Microphone Head
2) LCD Screen (see below)
3) Power / Mute Control Switch (see below)
4) Select Button (see below)
5) Microphone Input Sensitivity Adjustment—is used to set the gain of microphone. If you are a soft talking speaker you will need to turn the control counter clockwise. Turn clockwise if you are a loud talker. Use plastic screwdriver that is supplied.

Microphone Operation and Status Display

TURN ON MICROPHONE: Push and hold the "POWER/MUTE" (3) button until LCD screen lights up.

TO MUTE: Press "POWER/MUTE" button twice to MUTE. Channel number will flash when muted. Press button again twice to remove "MUTE".

TURN OFF MICROPHONE: Push and hold the "POWER/MUTE" (3) button for 2 seconds to turn microphone "OFF".

SELECT CHANNEL: Press and hold the "SELECT" (4) button for 2 seconds until you only see the word Channel and channel number. To change channel, when flashing, press the "SELECT" (4) button until you reach the desired channel. Flashing will stop after 10 seconds and channel is now set.

LOCK / UNLOCK CHANNEL: Push the "POWER/MUTE" (3)

PROBLEM SOLVING

HOWLBACK is the howl or screech often heard in sound reinforcement systems. It is caused by sound from the loudspeaker returning to the microphone. AmpliVox systems utilize proven acoustical principles to minimize this; however, there is no way to completely eliminate howl back under conditions of high amplification. If howl back occurs, check the following:

User's hand covering the head of the microphone. [Hold microphone under head slots.] Sound can easily re-enter microphone. Keep loudspeaker turned toward audience. Note: sound can be reflected from a hard surface back through the microphone. [Turn speaker.]

User holding microphone in a reflecting position. [Turn microphone.]

Volume setting too high. [Reduce microphone channel volume; compensate by speaking louder or closer to the microphone.]

NO SOUND

Make sure amplifier POWER switch is turned on and red LED is lit. If switch is on and LED is not lit, check to see that batteries are properly connected and at full charge. If using optional power adapter, check to see that front panel connector is properly seated, and verify that the power source is live.

WARRANTY

Limited Six (6) -Year Warranty

AmpliVox warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of six (6) years from the date of purchase ("Warranty Period").

During the Warranty Period, AmpliVox will repair or replace (at AmpliVox's discretion) this product or any defective parts ("Warranty Service").

Repair or replacement under the terms of this warranty does not give right to any extension or a new beginning of the period of warranty.

CLAIMS UNDER THE WARRANTY

To obtain Warranty Service, contact AmpliVox (800-267-5486) to be assigned a Return Authorization number (RA#). After receiving a RA#, the defective unit is to be returned to AmpliVox in either its original packaging or packaging affording an equal degree of protection. You will bear the cost of shipping the product to AmpliVox. If the product is covered by the warranty, AmpliVox will bear the cost of shipping product back to you after the completion of service under this warranty.

Return shipping will be charged to you for products not covered by the warranty or requiring no warranty repair.

The following information must be presented to obtain Warranty Service: (a) the RA# must be clearly and legibility marked on the outside of shipping carton, (b) proof of purchase, which clearly indicates the name and address of the seller, the date of purchase and the product type, which is evidence that this product is within the Warranty Period. Please further include (c) your return address, (d) daytime telephone number, and (e) reason for return.

LIMITATION OF WARRANTY