507356 - Audio/video switch Intellinet - Free user manual and instructions

USER MANUAL 507356 Intellinet

14-Slot Media Converter Chassis Instructions

Model 507356

Black rectangular electronic device with multiple ports and connectors, no visible text or symbols on the body

14-Slot Media Converter Chassis Instructions

Product Information

Product Overview

The Intellinet Network Solutions 507356 Media Converter Chassis accommodates up to 14 media converters in a single unit. The media converter Chassis allows hot-swapping the media converters, and provides strong redundancy due to its two integrated power supplies. Two high-volume cooling fans ensure a cool operating environment.

Features

• High-quality 19" rackmount steel chassis
• Supports up to 14 stand-alone media converters
- Two internal 100 – 260V universal switching power supplies avoid network
downtime and protect your converter investments
• Power supplies support load sharing, and circuit-breakers
protect against over voltage and short circuits
- Two high-volume cooling fans ensure perfect ventilation
- Slot power isolation ensures each slot is electrically isolated from the next

Specifications

• Capacity: 14 slots for up to 14 media converters
• Occupies 2 height units (2U)
• Certifications: FCC Class A, CE
• LED for each power supply
• Power Input: 100 – 260 VAC, output: 5 VDC
• Material: aluminum/steel
• Dimensions: 440 (L) x 231 (W) x 90 (H) mm
- Operating temperature: 0 – 50°C (32 – 122°F)
- Operating humidity: 5 – 95% RH, non-condensing
• Storage temperature: -20 – 85°C (-4 – 185°F)

Package Contents

• Media Converter Chassis with 2 integrated power supplies
• 14 media converter carries brackets

14-Slot Media Converter Chassis Instructions

Installation

1. Remove the slot cover by turning the screw counter clockwise.

Exterior view of industrial equipment cabinets with a white arrow pointing to a section (no visible text or symbols)

1. Attach the carrier bracket to the media converter.

Close-up of a black rectangular electronic component with ventilation slots and two circular mounting holes (no text or symbols visible)

First, unscrew the two screws on the side of the media converter housing, as indicated by the circles.

1. Next, use these screws to affix the bracket to the media converter housing. You will need a screw driver with a Phillips - head ("crosshead").

Mechanical device with a lever and adjustment knob, no visible text or symbols

Note: You need to attach the bracket to the side of the media converter, on which the power plug is located. Check the rear of the media converter housing to find out on which side the carrier brackets needs to be connected to.

14-Slot Media Converter Chassis Instructions

1. Insert Media Converter into the chassis, and then tighten the screw by turning it clock-wise.

2. Install the chassis in a standard 19" rack or cabinet. Connect both power supplies with a power outlet and set them both to the on position.

Maintenance

• Always power on both power supplies by setting both power buttons to the on position. Doing so will significantly increase the life-span of the power supplies.

- At dangerous power levels, the rear POWER LED will turn red. Disconnect the chassis from the power at once.

- If the fuse on the rear has blown, the POWER LED will turn off. Disconnect the chassis from the power and replace the fuse. Power the chassis back on. If the fuse breaks again, discontinue use of the chassis at once.

- If one of the chassis fans stops working, discontinue use of the chassis at once. Contact your place of purchase concerning the possible warranty replacement.

- If a media converter stops functioning, try resetting the media converter in the chassis to ensure proper contact of the power connectors.

14-Slot Media Converter Chassis Instructions

Warranty Information

English: For warranty information, go to intellinet-network.com/warranty.

North & South America

IC Intracom Americas

550 Commerce Blvd.

Oldsmar, FL 34677 USA

Asia & Africa

IC Intracom Asia

4+, No. 77, Sec. 1, Xintai 5th Rd.

Xizhi Dist., New Taipei City 221, Taiwan

Europe

IC Intracom Europe

Lohbacher Str. 7, D-58553

Halver, Germany

14-Slot Media Converter Chassis Instructions

Waste Electrical & Electronic Equipment

Disposal of Electric and Electronic Equipment

(applicable in the European Union and other European countries with separate collection systems)

English

This symbol on the product or its packaging indicates that this product shall not be treated as household waste. Instead, it should be taken to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential oxidative consequences to the environment and human health

which could otherwise be caused by inappropriate waste handling of this product. If your equipment contains easily removable batteries or accumulators, dispose of these separately according to your local requirements. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, contact your local city office, your household waste disposal service or the shop where you purchased this product. In countries outside of the EU: If you wish to discard this product, contact your local authorities and ask for the correct manner of disposal.

Deutsch

Regulatory Statements

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manufacturer could result in the product not meeting the Class A limits, in which case the FCC could void the user's authority to operate the equipment.

CE / R&TTE

English: This device complies with the requirements of R&TTE Directive 1999/5/EC.

The Declaration of Conformity for this product is available at: