AccuSync PV32 - TV NEC - Free user manual and instructions

USER MANUAL AccuSync PV32 NEC

3D rendering of a flat-screen television with 'NEC' branding on the front panel (no additional text or symbols)

English

English

Table of Contents

Important Information .... English-2

Safety Precautions and Maintenance .... English-3

Recommended Use English-4

Package Contents .... English-5

Part Names and Functions

Control Panel English-6

Terminal Panel - APV32/APV40 English-7

Terminal Panel - APV46 English-8

Remote Control English-9

Battery Installation English-10

Connections

Connect Antenna English-11

Connect VCR English-11

Connect Cable TV English-12

Connect External AV Source English-12

Connect DVD Player English-13

Connect HDMI .... English-13

Connect Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-14

Connect PC (DTV) English-14

Connect Digital Audio .... English-14

Basic Operation

Power On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-15

Volume Adjustment .... English-15

On Screen Language Selection .... English-15

Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-16

Channel Programming .... English-17

Add/Delete Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-18

Fine Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-19

Favorite Channel English-20

DTV Channel Edit English-21

Color Temperature ..... English-22

Picture Mode .... English-23

Manual Picture Control .English-23

Picture Format .... English-24

Sound ...... English-25

Important Information

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINETAS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

1. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: "How to Identify and Resolve Radio-TV Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.

Safety Precautions and Maintenance

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UPAND USING THE MONITOR:

• DO NOT OPEN THE MONITOR. There are no user-servicable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.
• Do not spill any liquids into the cabinet or use your monitor near water.
• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.
• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.
• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor.
• When operating the monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply voltage of the AC power outlet being used. The power supply cord you use must have been approved by and comply with the safety standards of your country. (Type H05VV-F 3G 1mm² should be used in Europe)
• Do not place any objects onto the monitor and do not use the monitor outdoors.
  • The lamps in this product contain mercury. Please dispose according to state, local, or federal law.

CAUTION

Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged.
• If liquid has been spilled on, or objects have fallen into the monitor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet damaged.
• If the monitor does not operate normally by following operating instructions.

Recommended Use

CAUTION

CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SIOLLDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN POSITIONING THE MONITOR:

• For optimum performance, allow 20 minutes for warm up.
• Rest your eyes periodically by focusing on an object at least 5 feet away. Blink often.
• Position the monitor at a 90° angle to windows and other light sources to minimize glare and reflections.
• Clean the LCD monitor surface with a lint-free, nonabrasive cloth. Avoid using any cleaning solution or glass cleaner.
• Adjust the monitor's brightness and contrast controls to enhance readability.
• A void displaying fixed patterns on the monitor for long periods of time to avoid image persistence (afterimage effects).
• Get regular eye checkups.

Ergonomics

Torealize the maximum ergonomic benefits, we recommend the following:

• Use the preset Size and Position controls with standard signals.
• Use the preset Color Setting.

Cleaning the LCD Panel

• When the liquid crystal panel becomes dusty or dirty, wipe gently with soft cloth.
• Do not rub the LCD panel with coarse material.
• Do not apply pressure to the I.CD surface.
• Do not use OA cleaner. OA cleaner will cause deterioration or discolor the LCD surface.

Cleaning the Cabinet

- Unplug the power supply

• Gently wipe the cabinet with a soft cloth

- T o clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the cabinet and follow with a dry cloth.

NOTE: The surface of the cabinet is composed of plastic. DO NOT clean with benzene thinner, alkaline detergent, alcoholic system detergent, glass cleaner, wax, polish cleaner, soap powder, or insecticide. Rubber or vinyl should not be in contact with the cabinet for an extended period of time. These types of fluids and materials can cause the paint to deteriorate, crack or peel.

Package Contents

LCD Monitor Power Cord x 1 VGA Cable

English

User's Manual

Wireless Remote Control and AAA Batteries

Part Names and Functions

Control Panel

* 46inch model only 9 On/Off 8 6 7 ON INPUT MENU VOL CH 1 2 3 4 5

Part Names and Functions - continued

Terminal Panel - APV32/APV40

English

40inch model only 1 2 3 4 5 AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO (RGB/AN) AUDIO

Part Names and Functions - continued

Terminal Panel - APV46

5 10 11 HDMI IN HDMI IN HDMI IN FEE IN AUDIO IN RIGOTV SERVICE IF/AUDICULY COMPONENT P/P ONALDOUL AVIN ONALDOUL AVIN VIDEO 3 VIDEO ANT. IN VIDEO DIGITAL AUDIO CAPITAL CUT AC IN 1 2 12 13 3 4 5 6 7 8 9

Part Names and Functions - continued

■ Remote Control Functions

POWER ON POWER OFF 1 2 3 4 5 6 7 8 9 TV/DTV - 0 5 6 PICTURE ASPECT SOUND MENU FAVORITE INPUT MTSMUTE CC EXIT 10 14 12 13 15 16 OK 17 Q VIEW CH EDIT INFO SLBSER 18 19 20 21 UP DOWN STOP SLPS 22 SOD UP INPUT AGWAP RCH 23 SELL 40 45 48 24 SAVE Z CNTEN PULSE HUNT

8. SOUND

Recalls preferred sound settings.

9. MENU

Activates menu.

10. INPUT

Selects input source.

11.MUTE

Mutes audio output.

12. MTS

Multi-track sound system selection.

13. CC

Closed captioning.

14. FAVORITE

Selects favorite channel.

15. EXIT

Exits each mode.

16. CHANNEL UP/DOWN (▲ / ▼)

Selects a channel or a menu item.

Switches the set on from standby.

VOLUME UP/DOWN (▼) ▶

Adjusts the volume.

Adjusts menu settings.

Accepts your selection or displays the current mode.

17. Q.VIEW

Returns to previous channel.

18. CH EDIT (Digital Mode only)

Displays channel edit menu.

19. SLEEP

Part Names and Functions - continued

■ Battery Installation

The remote control is powered by two AAA batteries.

1. To insert batteries, turn the remote control handset over and remove the battery cover.

2. Put the two batteries into the compartment, observing battery polarity.

3. Replace the cover.

To avoid damage from possible battery leakage, remove the batteries if the remote will not be used for an extended period time. Do mix old and new batteries.

Do not mix battery types.

Always dispose of batteries properly.

Connections

Additional equipment (VCRs, camcorders, etc.) can be connected to the set. Check with your equipment manufacturer's instructions for specific information. Unplug the set and all equipment before connecting to avoid damage to the set or equipment.

Items shown may be different than actual equipment.

Connect Antenna

To connect an Antenna or Cable Service without a Cable Box Connection. For optimum picture quality, adjust antenna direction if needed

Multi-family Dwellings / Apartments (Connect to wall antenna socket)

graph TD
    A["Wall antenna socket"] --> B["RF coaxial wire (75 ohms)"]
    B --> C["Ant T780"]
    D["VHF antennas UHF antenna outdoor antenna"] --> E["Single-family Dwellings / Houses (Connect to wall jack for outdoor antenna)"]
    F["Internal Wire"] --> G["Back panel of the set >"]
    style A fill:#f9f,stroke:#333
    style D fill:#ccf,stroke:#333
    style F fill:#cfc,stroke:#333
    style G fill:#fcc,stroke:#333

Connections - continued

■ Connect Cable TV

Cable Box

Subscription to a local cable TV service and cable converter required. For further cable TV information, contact a local cable service provider.

Connection 1

1. Select 3 or 4 with channel switch on cable box.
2. Tune the TV channel to the same selected output channel of cable box.
3. Select channels at the cable box or with the cable box remote control.

Connection 2

1. Connect the audio/video output jacks on Cable Box to the corresponding input jacks on the TV. When connecting the TV to Cable Box, match the jack color (Video = yellow, Audio Left = white, and Audio Right = red).
2. Use the INPUT button on the remote control to select AV1, AV2 or AV3.
3. Select channels with the cable box remote control.

■ Connect External AV Source

Connect the audio/video output jacks on the external A/V equipment to the corresponding input jacks on the TV. When connecting the TV to external A/V equipment, match the jack color (Video = yellow, Audio Left = white, and Audio

●	○	○

Connections - continued

■ Connect DVD Player

V V V V V V DVD

Connect the DVD video outputs to the COMPONENT (Y, Pb, Pr) jacks and connect the DVD audio outputs to the AUDIO jacks.

Viewing Setup

1. Turn on the DVD player, insert a DVD.

2. Use the INPUT button on the remote control to select Component.

3. Refer to the DVD player's manual for operating instructions.

- Component Input ports

Toget better picture quality, connect a DVD player to the component input ports as shown.

Component input signal : 480i / 480p / 720p / 1080i

Component input on Set	Y	Pb	Pr
Video Output on DVD	Y	PB	PR
	Y	B-Y	R-Y
	Y	Cb	Cr
	Y	Pb	Pr

■ Connect HDMI(DTV)

This TV SET can receive High-Definition Multimedia Interface (HDMI) or Digital Visual Interface (DVI) signals.

English

Connections - continued

■ Connect Headphones

< Side panel of the set > AVOUT R/LAUDIO L VIDEO AVIN R/LAUDIO L VIDEO

Insert the headphone plug to the headphone socket of the set.

You can listen to the sound through the headphone. To adjust the headphone volume, press the ◀ / ▶ button.

Control the volume of the headphone to the appropriate level.

Hearing for a long time with the high volume will damage the eardrum.

■ Connect PC (DTV)

< Back panel of the set > F5001 (R:001-8429 R:001) A:001 P:001 B:001 P:001 D:0 Df

The set can be used as a PC monitor.

Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the RGB IN socket of the set.

Connect the audio cable from the PC to the AUDIO IN sockets of the set.

Press the INPUT button to select PC-RGB.

Switch on the PC, and the PC screen appears on the Menu.

Select the AUTO PROGRAM function in the PC setup Menu to adjust the screen automatically.

RCR-DTV input signal: 480n-60Hz, 720n-50Hz, 720n-60Hz, 1080n-50Hz

Basic Operation

■ On and Off

After the set is properly connected to the correct power outlet with the proper rating, it enters the standby mode.

When the set is in standby mode, press the POWER, or the ▲ /▼ buttons on the remote control to switch it on fully.

Press the POWER button on the remote control to go back into the standby mode.

Volume Adjustment

Press the ◀ / ▶ button to adjust the volume.

Press the MUTE button to silence the audio.

Press MUTE, ◀ / ▶, SOUND or the MTS buttons to cancel.

■ On Screen Language Selection

Press the MENU button and then use ▲ / ▼ button to select the SETUP menu.

Press the ▶ button and then use ▲ / ▼ button to select your desired language.

All the text of the on screen displays will appear in the selected

Basic Operation - continued

Menu

Use the on screen display menu to access various functions and features and to change settings of the set.

Press the MENU button and then use ▲ / ▼ button to display each menu.

Press the ▶ button and then use ▲ / ▼ button to select a menu item.

Press the ▶ button to display the sub menu.

Change the setting of an item in the sub menu with ▲ / ▼ or ◀ / ▶.

Move to the previous menu using the ◀ button and move to the next menu using the ▶ button.

NOTE: Menus may vary according to input mode.

Basic Operation - continued

■ Channel Programming

For the Auto Program function to work properly, the TV must be receiving signals either from a cable-type source or over the air.

Press the MENU button and then use ▲ / ▼ button to select the STATION menu.

Press the ▶ button and then use ▲ / ▼ button to select DTV (Digital TV) Antenna Select.

Press the ▶ button and then use ▲ / ▼ button to select Antenna or Cable.

Press the OK button to save.

Press the ▲ / ▼ button to select Auto Program.

Press the ▶ button and then use ▲ / ▼ button to select System.

Press the ◀ / ▶ button to select Analog, Digital, ALL.

ALL: Digital & Analog search

Digital: Digital search only

Analog: Analog search only

Press the ▲ / ▼ button to select Search.

Press the ▶ button to begin the channel search.

- Wait for auto channel to complete the channel search cycle before choosing a channel. The TV scans first for over-the-air channels and then channels provided by a cable service.

NOTE: When the channel search is complete, use the ▲ / ▼ buttons to review the channel.

STATION DTV Antenna Select Auto Program Manual Favorite Channel DTV Channel Edit Antenna ✓ Cable on thru STATION DTV Antenna Select Auto Program Manual Favorite Channel DTV Channel Edit System Search >> ALL

English

Basic Operation - continued

■ Add/Delete Channels

You can manually add or delete individual channels. The channel being displayed is either added to or erased from memory.

Press the MENU button and then use ▲ / ▼ button to select the STATION menu.

Press the ▶ button and then use ▲ / ▼ button to select Manual.

Press the ▶ button and then use ▲ / ▼ button to select Channel.

Press the ◀ / ▶ button to select the channel number.

Press the ▲ / ▼ button to select Storage.

Press the ◀ / ▶ button to select Memory (add) or Erase (Not Viewable).

Your choices are DTV mode: The Not Viewable channel is modified to Viewable from the channel edit.

Press the MENU button repeatedly to return to normal TV viewing.

STATION DTV Antenna Select Auto Program Manual Favorite Channel DTV Channel Edit Channel TV 45 Storage Memory Fine 0 OK DOWN

STATION DTV Antenna Select Auto Program Manual Favorite Channel DTV Channel Edit Channel TV 45 Storage Memory Fine 0

Basic Operation - continued

■ Fine Tuning

Adjusts poor picture stability and image quality.

Press the MENU button and then use ▲ / ▼ button to select the STATION menu.

Press the ▶ button and then use ▲ / ▼ button to select Manual.

Press the ▶ button and then use ▲ / ▼ button to select Fine.

Use the ◀ / ▶ button to adjust the picture to your preference.

Repeatedly press the MENU button to return to normal TV viewing.

English

STATION DTV Antenna Select Auto Program Manual Favorite Channel DTV Channel Edit Channel TV 45 Storage Memory Fine +1 >>>>

Basic Operation - continued

■ Favorite Channel

Favorite Channel lets you quickly tune in up to 8 channels of your choice without having to wait for the TV to scan through all the in-between channels.

Press the MENU button and then use ▲ / ▼ button to select the STATION menu.

Press the ▶ button and then use ▲ / ▼ button to select Favorite Channel.

Press the ▶ button and then use the ▲ / ▼ buttons to select the first favorite channel position.

Press the ◀ / ▶ buttons to set the desired channel number for the first favorite channel.

- Repeat this step to store the other 7 channels.

Press the OK button to save.

Press the FAVORITE button to cycle through the stored favorite channels.

Repeatedly press the MENU button to return to normal TV viewing.

NOTE: The 8 favorite channels appear on the screen one after another.

STATION DTV Antenna Select Auto Program Manual Favorite Channels DTV Channel Edit TV 45 0x 0001

Basic Operation - continued

■ DTV Channel Edit

The Edit function enables the user to delete or skip stored channels or to move to programmed channels to different positions.

Press the MENU button and then use ▲ / ▼ button to select the STATION menu.

Press the ▶ button and then use ▲ /▼ button to select DTV Channel Edit.

Press the ▶ button and then use the ▲ / ▼ buttons to select the channel.

Press the ◀ / ▶ button to select the Viewable. Not Viewable, or FCR Channel.

Press the OK button to save.

Press the FAVORITE button to cycle through the stored favorite channels.

Repeatedly press the MENU button to return to normal DTV viewing.

English

Basic Operation - continued

■ Color Temperature

Press the MENU button and then use ▲ / ▼ button to select the PICTURE menu.

Press the ▶ button and then ▲ / ▼ button to select Color Temperature.

Press the ▶ button and then ▲ / ▼ button to select the desired color temperature.

Repeatedly press the MENU button to return to normal TV viewing.

- Y ou can adjust red, green, or blue to any color temperature you prefer.

Press the MENU button and then use ▲ / ▼ button to select the PICTURE menu.

Press the ▶ button and then use ▲ / ▼ button to select Color Temperature.

Press the ▶ button and then use ▲ / ▼ button to select User.

Press the ▶ button and then use ▲ / ▼ button to make appropriate adjustments.

Toreset default settings, select the Normal option.

Repeatedly press the MENU button to return to normal TV viewing.

PICTURE Color Temperature Picture Mode Contrast Brightness Color Sharpness Tint COOL Normal Warm User OK OKOM

Basic Operation - continued

■ Picture Mode

Picture Mode adjusts the TV for the best picture appearance.

Press the MENU button and then use ▲ / ▼ button to select the PICTURE menu.

Press the ▶ button and then use ▲ / ▼ button to select Picture Mode.

Press the ▶ button and then use ▲ / ▼ button to select a picture setting on the Picture Mode pulldown menu.

Repeatedly press the MENU button to return to normal TV viewing.

You can also recall a desired picture setting (Dynamic, Standard, Mild, Game or User) by pressing the PICTURE button on the remote control.

The Dynamic, Standard, Mild and Game settings are set for good picture reproduction and cannot be changed.

English

PICTURE Color Temperature Picture Mode Contrast Brightness Color Sharpness Tint ✓ Dynamic Standard Mild Game User OK OKOM

■ Manual Picture Control

Press the MENU button and then use ▲ / ▼ button to select the PICTURE menu.

Basic Operation - continued

■ Picture Format

You can watch TV in various picture formats; 16:9, 14:9, 4:3, ZOOM1, ZOOM2, and SPECTACLE.

1. Press the ASPECT button repeatedly to select a desired picture format.

- Y ou can only select 16:9, 14:9, 4:3, ZOOM1, ZOOM2. SPECTACLE in TV, AV1, AV2, AV3, and S-Video modes only. - Y ou can select 16:9, 4:3 in Component, PC-RGB, HDMI, and DTV mode only.

NOTE: A short term or permanent afterimage effect may remain on the screen as a result of displaying an unmoving image, such as text in a broadcasting name, or when using the 4:3 screen at the ARC adjustment for a long period of time.

graph LR
    A["Step 1: 18:19"] --> B["Step 2: 2:3:45"]
    B --> C["Step 3: 2:3:45"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

Basic Operation - continued

Sound

Sound Mode helps to provide the best sound without any special adjustment because the TV sets the appropriate sound options based on the channel content.

Press the MENU button and then use ▲ / ▼ button to select the SOUND menu.

Press the ▶ button and then use ▲ / ▼ button to select Sound Mode.

Press the ▶ button and then use ▲ / ▼ button to select a sound setting on the Sound Mode pulldown menu.

Repeatedly press the MENU button to return to normal TV viewing.

Sound Frequency Adjustment

a. Press the ▶ button in User.

b. Select a sound band by pressing the ◀ / ▶ button.

c. Make appropriate sound level with the ▲ / ▼ button.

d. Press the OK button to store it for the sound User.

You can also recall a desired sound setting (Flat, Music, Movie, Speech or User) with SOUND button on the remote control.

The Flat, Music, Movie and Speech sound options are default settings and cannot be changed.

English

SOUND Sound Mode Balance Auto Volume SRS TruSurround XT Audio Language TV Speaker Flat Music Movie Speech User OK DOWN

Basic Operation - continued

Balance

You can adjust the sound balance between the speakers to the levels you prefer.

Press the MENU button and then use ▲ / ▼ button to select the SOUND menu.

Press the ▶ button and then use ▲ / ▼ button to select Balance.

Press the ▶ button and then use ◀ / ▶ button to make appropriate adjustments.

Repeatedly press the MENU button to return to normal TV viewing

SOUND Sound Mode Balance Auto Volume SRS TruSurround XT Audio Language TV Speaker SO WMU LO O 'OK' (OK)

■ Auto Volume

Auto Volume automatically keeps the audio level the same when you change channels.

Basic Operation - continued

■ SRS TruSurround XT

SRS TruSurround XT is a trademark of SRS Labs, Inc.

TruSurround XT technology is incorporated under license from SRS Labs, Inc.

Manufactured under license form Dolby Laboratories.

Press the MENU button and then use ▲ / ▼ button to select the SOUND menu.

Press the ▶ button and then use ▲ / ▼ button to select SRS TruSurround XT.

Press the ▶ button and then use ▲ / ▼ button to select On or Off.

Repeatedly press the MENU button to return to normal TV viewing.

English

SOUND Sound Music Balance Auto Volumes SRS TruSurround XT Audio Language TV Speaker OK MODEL ✓ On Off

Basic Operation - continued

■ Audio Language (Digital Mode only)

This function lets you select preferred audio language.

Press the MENU button and then use ▲ / ▼ button to select the SOUND menu.

Press the ▶ button and then use ▲ / ▼ button to select Audio Language.

Press the ▶ button and then use ▲ / ▼ button to select English, French or Spanish.

Repeatedly press the MENU button to return to normal DTV viewing.

SOUND Sound Mode Balance Auto Volume SBS TruSurround XT Audio Language TV Speaker OK DOWN ✓ English French Spanish

TV Speaker

Turn TV speakers off when using external audio equipment.

Press the MENU button and then use ▲ / ▼ button to select the

Basic Operation - continued

■ Stereo/SAP Broadcasts Setup

The TV can receive MTS stereo channels and any SAP (Secondary Audio Program) that accompanies the stereo channel, if the broadcaster transmits an additional sound signal as well as the original one.

STEREO: The primary language is heard from left and right speakers. Signal mode is stereo.

SAP: The secondary language is heard from left and right speakers.

MONO: The same primary language is heard from left and right speakers. Signal mode is mono.

- Press the MTS button repeatedly.

Select mono sound mode if the signal is not clear or if signal reception is poor.

STEREO and SAP modes are available only if they are included on the broadcast signal.

Basic Operation - continued

Clock

Auto

The digital channel signal includes information for the current time provided by the broadcasting station and sets the clock automatically.

Set the clock manually if the time is set incorrectly by the auto clock function.

Press the MENU button and then ▲ / ▼ button to select the TIME menu.

Press the ▶ button and then ▲ / ▼ button to select Clock.

Press the ▶ button and then ▲ / ▼ button to select Auto.

Repeatedly press the MENU button to return to normal TV viewing.

Manual

If current time setting is wrong, reset the clock manually.

Press the MENU button and then ▲ / ▼ button to select the TIME menu.

Press the ▶ button and then ▲ / ▼ button to select Clock.

Press the ▶ button and then ▲ / ▼ button to select Manual.

Press the ▶ button and then ▲ / ▼ button to adjust the hour/minute.

Repeatedly press the MENU button to return to normal TV viewing.

TIME Clock Oil Time On Time Auto Sleep Time Zone Daylight Saving 00:00 AM Auto 10 30 AM

Basic Operation - continued

On/Off Time

The off timer automatically switches the set to standby after a preset time.

Press the MENU button and then ▲ / ▼ button to select the TIME menu.

Press the ▶ button and then ▲ / ▼ button to select Off Time or On Time.

Press the ▶ button and then ▲ / ▼ button to select On.

To cancel Off/On Time function, press the ▲ / ▼ button to select Off.

Press the ▶ button and then use ▲ / ▼ button to select DTV or TV.

Press the ▶ button and then ▲ / ▼ button to adjust the hour / minute.

Only for the On Time function; Press the ▶ button and then ▲ /▼ button to adjust volume level and channel number.

Repeatedly press the MENU button to return to normal TV viewing.

NOTE:

In the event of power interruption (disconnection or power failure) the clock must be reset.

Two hours after the set is switched on by the On Time function it will automatically switch back to standby mode unless a button is pressed.

Once the on or off time is set, these functions will operate daily at the preset time.

English

TIME Clock Off Time On Time Auto Sleep Time Zone Daylight Saving OFF (RGB) DTV CH CAD TV 2-1 VOL 30 Off AM

Basic Operation - continued

■ Auto Sleep

If you select On in the Auto Sleep menu, the set will automatically switch itself to standby mode approximately ten minutes after it stops receiving external signals.

Press the MENU button and then ▲ / ▼ button to select the TIME menu.

Press the ▶ button and then ▲ / ▼ button to select Auto Sleep.

Press the ▶ button and then ▲ / ▼ button to select On or Off.

Repeatedly press the MENU button to return to normal TV viewing.

TIME Clock Off Time On Time Auto Sleep Time Zone Daylight Saving OK DOWN ✓ On Off

■ Time Zone (Digital Mode only)

Not available when clock is set manually.

Press the MENU button and then ▲ / ▼ button to select the TIME

Basic Operation - continued

■ Daylight Saving (Digital Mode only)

If your area observes Daylight Saving time, turn this setting On.

Press the MENU button and then ▲ / ▼ button to select the TIME menu.

Press the ▶ button and then ▲ / ▼ button to select Daylight Saving.

Press the ▶ button and then ▲ / ▼ button to select Auto, On or Off.

Repeatedly press the MENU button to return to normal DTV viewing.

English

TIME Clock Off Time On Time Auto Sleep Time Zone Daylight Saving OK DOWN ✓ Auto On Off

Sleep timer

The sleep timer automatically switches the set to standby after the preset time has elapsed.

Basic Operation - continued

■ Child Lock

The TV can be set so that the remote control handset is required to control it. This feature can be used to prevent unauthorized use of the control buttons on the unit.

Press the MENU button and then ▲ / ▼ button to select the SETUP menu.

Press the ▶ button and then ▲ / ▼ button to select Child Lock.

Press the ▶ button and then ▲ / ▼ button to select On or Off.

Repeatedly press the MENU button to return to normal TV viewing.

With the lock on, the display Child Lock appears on the screen if any button on the front panel is pressed while viewing the TV.

SETUP Language PC Control WXGA vGA Child Lock Front Light Caption Set ID OK DOWN ✓ On Off

■ Front Light

You can switch Front Light LED on or off.

Press the MENU button and then ▲ /▼ button to select the SETUP

Basic Operation - continued

■ Closed Caption

Use the CC button repeatedly to select the Closed Captions.

Not available in Component, RGB-PC, and HDMI modes.

Press the MENU button and then ▲ / ▼ button to select the SETUP menu.

Press the ▶ button and then ▲ / ▼ button to select Caption.

Press the ▶ button and then ▲ / ▼ button to select your caption selection.

Choices are: OFF, CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, and TEXT4.

Repeatedly press the MENU button to return to normal TV viewing.

English

SETUP Language PC Control WXGA VGA Chic Lock Front Light Caption Set ID Caption OFF OK DOWN

Basic Operation - continued

■ Closed Caption (Digital Mode)

Press the CC button repeatedly to select Closed Caption method.

Customize The DTV/CADTV captions that appear on your screen.

Not available in Component and RGB-PC modes.

Press the MENU button and then ▲ / ▼ button to select the SETUP menu.

Press the ▶ button and then ▲ / ▼ button to select Caption.

Press the ▶ button and then ▲ / ▼ button to select your caption selection.

Your choices are: OFF, English, Spanish, French, Service4, Service5, and Service6.

Caption Option

Press the ▲ / ▼ button to select Closed Caption Option.

Press the ▶ button and then ▲ / ▼ button to select the desired font style item.

Press the ◀ / ▶ button to make appropriate adjustments to the font style.

A preview icon is provided at the bottom of the screen, use it to see the closed caption language.

SETUP Language PC Control WXGA VGA Chic Lock Front Light Caption Set ID OK (OK) SETUP Language PC Control WXGA VGA Chic Lock Front Light Caption Set ID Caption ▶ Service4 ▶ Caption Option ▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▶▲

Basic Operation - continued

■ Lock Menu Options

Parental Control can be used to block specific channels, ratings, and other viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcast station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period. To use this function, the following must be set:

1. Ratings and categories to be blocked.
2. Set a password
3. Enable the lock of V-Chip ratings and categories

Rating guidelines are provided by broadcast stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.

Options for Movies previously shown in theaters:

• None
  • G and Above (general audience)
  • PG and Above (parental guidance suggested)
  • PG-13 and Above (13 years and older)
• R and Above (Restricted, Children under 17 should be accompanied by an adult.)
  • NC-17 and Above (18 years and older)

Content Categories:

• Dialog - sexual dialogue: (Applies to TV-PG and Above. TV-14)
  • Language - adult language: (Applies to TV-PG and Above, TV-14 and Above, and TV-MA)
• Sex scenes - sexual situations: (Applies to TV-PG and Above, TV-14 and Above, and TV-MA)
  • V violence: (applies to TV-PG and Above, TV-14 and Above, and TV-MA)
  • F V violence - fantasy violence: (Applies to TV-PG and Above, TV-14 and Above, and TV-MA)

Canadian English/French language rating system:

- None

• C and Above: (Children)
• C8+ and Above: (8 years and up)
• G and Above: (General programming. Suitable for all audiences.)
• PG and Above: (Parental guidance suggested)
• 14+ and Above: (Viewers 14 years and older)
• 18+: (Adult programming)

Canadian French language rating system:

Basic Operation - continued

■ Lock System

Press the MENU button and then use ▲ / ▼ button to select the LOCK menu. Then, press the ▶ button.

If Lock is already set, enter the password.

The initial password is "0-0-0-0".

Setting Lock on/off

Enables or disables the blocking scheme you set up previously.

Press the ▲ / ▼ button to select Lock System.

Press the ▶ button and then use ▲ / ▼ button to select On or Off.

Set password

Change the password by inputting a new password twice.

Press the ▲ / ▼ button to select Set Password

Press the ▶ button.

Enter a four digit password.

As soon as the 4 digits are entered, re-enter the same 4 digits in the New, and Confirm areas.

Press the OK button to save.

If an invalid password is input in Confirm Password screen, "Password Mismatch" appears on screen.

Basic Operation - continued

Rating

To Select Canadian / English / French rating system press the ▲ / ▼ button to select Rating.

Press the ▶ button and then use ▲ / ▼ button to select TV Rating Limit or Canadian.

Press the ▶ button and then use ▲ / ▼ button to select type of ratings to block.

Press the ▲ / ▼/ ◀ / ▶ button to select your rating selection.

Press the OK button to lock or unlock.

Press the MENU button to rating save, return to normal TV viewing.

English

LOCK Lock System Set Password Rating Input Block OK UDDU TV & MPAA ▶▶▶▶ Canadian ▶▶▶▶▶

MP4A Rating ALL F9 L5 V/D NONE None G TV-Y PG TV-YY PG-13 TV-G R TV-PG NG-17 TV-14 X TV-MA

Basic Operation - continued

Input Block

Select an external source to block.

Press the ▲ / ▼ button to select Input Block.

Press the ▶ button and then use ▲ / ▼ button to select a source.

Press the ▶ button and then use ◀ / ▶ button to select Blocked or Unblocked for each source.

Repeatedly press the MENU button to return to normal TV viewing.

LOCK Lock System Set Password Rating Input Block AV1 Unbooked AV2 Unbooked AV3 Unbooked S-VIDEO Unbooked Comp. Unbooked PC-RG3 Unbooked HDMI 1 Unbooked HDMI 2 Unbooked HDMI 3 Unbooked (40/46inch model only)

Basic Operation - continued

PC Setup

The following items can be selected or adjusted: Horizontal/Vertical position, Clock, Phase, and Auto Program.

Press the MENU button and then use ▲ / ▼ button to select the SETUP menu.

Press the ▶ button and then use ▲ / ▼ button to select PC Control.

Press the ▶ button and then ▲ / ▼ button to select the desired picture item.

Press the ▲ / ▼ button to make appropriate adjustments.

H-Position / V-Position

Adjusts picture to left/right and up/down as you prefer.

Clock

This function is to minimize any vertical bars or stripes visible on the screen background. Horizontal screen size will also change.

Phase

Removes any horizontal noise. Clears or Sharpens text.

Auto Program

This function is for the automatic adjustment of the screen position, clock and phase. The displayed image will disappear for a few seconds while the Auto Program is in progress.

Reset

Restores factory settings.

NOTE: Some signals from some graphics boards may not function

English

SETUP Language PC Control WXGA VGA Child Look Front Light Caption Set ID H-POS V-POS Clock 0 Phase 0 Auto Program Reset OK MENU

Basic Operation - continued

■ WXGA or VGA (PC-RGB Mode only)

When a WXGA signal is present, select the desired resolution.

SETUP Language PC Control WXBA VGA Child Lock Front Light Caption Set ID 1024X768 1280X768 1360X768 1366X768

■ Information (Digital Mode only)

This function shows the present input information.

Press the INFO button while watching DTV. The information

Ch 9-1 KBS D1	Aug-10:2006 3:27 PM
Speed	3:00 PM-4:45 PM
16:9 HD 1080l Not Rating	DD Stereo

Basic Operation - continued

■ Picture in Picture

PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source will show a smaller inset image.

Press the PIP button to show the sub picture.

Each press of PIP button changes the screen display as shown below.

graph TD
    A["Grass on left"] --> B["Grass on right"]
    B --> C["Grass on top"]
    C --> D["Grass on bottom"]
    D --> E["Grass on top + 40-inch model only"]
    E --> F["Grass on bottom + 46-inch model only"]
    F --> G["Grass on top + 40-inch model only"]
    G --> H["Grass on bottom + 46-inch model only"]
    H --> I["Grass on top + 40-inch model only"]
    I --> J["Grass on bottom + 46-inch model only"]
    J --> K["Grass on top + 40-inch model only"]
    K --> L["Grass on bottom + 46-inch model only"]
    L --> M["Grass on top + 40-inch model only"]
    M --> N["Grass on bottom + 46-inch model only"]
    N --> O["Grass on top + 40-inch model only"]
    O --> P["Grass on bottom + 46-inch model only"]
    P --> Q["Grass on top + 40-inch model only"]
    Q --> R["Grass on bottom + 46-inch model only"]
    R --> S["Grass on top + 40-inch model only"]
    S --> T["Grass on bottom + 46-inch model only"]
    T --> U["Grass on top + 40-inch model only"]
    U --> V["Grass on bottom + 46-inch model only"]
    V --> W["Grass on top + 40-inch model only"]
    W --> X["Grass on bottom + 46-inch model only"]
    X --> Y["Grass on top + 40-inch model only"]
    Y --> Z["Grass on bottom + 46-inch model only"]
    Z --> AA["Grass on top + 40-inch model only"]
    AA --> AB["Grass on bottom + 46-inch model only"]
    AB --> AC["Grass on top + 40-inch model only"]
    AC --> AD["Grass on bottom + 46-inch model only"]
    AD --> AE["Grass on top + 40-inch model only"]
    AE --> AF["Grass on bottom + 46-inch model only"]
    AF --> AG["Grass on top + 40-inch model only"]
    AG --> AH["Grass on bottom + 46-inch model only"]
    AH --> AI["Grass on top + 40-inch model only"]
    AI --> AJ["Grass on bottom + 46-inch model only"]
    AJ --> AK["Grass on top + 40-inch model only"]
    AK --> AL["Grass on bottom + 46-inch model only"]
    AL --> AM["Grass on top + 40-inch model only"]
    AM --> AN["Grass on bottom + 46-inch model only"]
    AN --> AO["Grass on top + 40-inch model only"]
    AO --> AP["Grass on bottom + 46-inch model only"]
    AP --> AQ["Grass on top + 40-inch model only"]
    AQ --> AR["Grass on bottom + 46-inch model only"]
    AR --> AS["Grass on top + 40-inch model only"]
    AS --> AT["Grass on bottom + 46-inch model only"]
    AT --> AU["Grass on top + 40-inch model only"]
    AU --> AV["Grass on bottom + 46-inch model only"]
    AV --> AW["Grass on top + 40-inch model only"]
    AW --> AX["Grass on bottom + 46-inch model only"]
    AX --> AY["Grass on top + 40-inch model only"]
    AY --> AZ["Grass on bottom + 46-inch model only"]
    AZ --> BA["Grass on top + 40-inch model only"]
    BA --> BB["Grass on bottom + 46-inch model only"]
    BB --> BC["Grass on top + 40-inch model only"]
    BC --> BD["Grass on bottom + 46-inch model only"]
    BD --> BE["Grass on top + 40-inch model only"]
    BE --> BF["Grass on bottom + 46-inch model only"]
    BF --> BG["Grass on top + 40-inch model only"]
    BG --> BH["Grass on bottom + 46-inch model only"]
    BH --> BI["Grass on top + 40-inch model only"]
    BI --> BJ["Grass on bottom + 46-inch model only"]
    BJ --> BK["Grass on top + 40-inch model only"]
    BK --> BL["Grass on bottom + 46-inch model only"]
    BL --> BM["Grass on top + 40-inch model only"]
    BM --> BN["Grass on bottom + 46-inch model only"]
    BN --> BO["Grass on top + 40-inch model only"]
    BO --> BP["Grass on bottom + 46-inch model only"]
    BP --> BQ["Grass on top + 40-inch model only"]
    BQ --> BR["Grass on bottom + 46-inch model only"]
    BR --> BS["Grass on top + 40-inch model only"]
    BS --> BT["Grass on bottom + 46-inch model only"]
    BT --> BU["Grass on top + 40-inch model only"]
    BU --> BV["Grass on bottom + 46-inch model only"]
    BV --> BW["Grass on top + 40-inch model only"]
    BW --> BX["Grass on bottom + 46-inch model only"]
    BX --> BY["Grass on top + 40-inch model only"]
    BY --> BZ["Grass on bottom + 46-inch model only"]

English

Basic Operation - continued

■ PIP Audio Output

PIP mode - main and sub picture audio select.

Press the MENU button and then use ▲ / ▼ button to select the Main/PIP menu.

Press the ▶ button and then use ▲ / ▼ button to select Audio Output.

Press the ▶ button and then use ▲ / ▼ button to select Main or Sub.

Repeatedly press the MENU button to return to normal TV viewing.

Main/PIP Main Input Main Aspect Ratio PIP Mode PIP Input PIP Size PIP Position Audio Output √ Main Sub 1 2 OK MODE

■ Moving the PIP

Press the PIP POSITION button.

Press the PIP POSITION button repeatedly until desired position is

Basic Operation - continued

■ Channel selection for sub picture (Sub picture only TV mode)

Press the PIP CH +/- button. The selected channel number is displayed just below the channel number of main picture.

English

■ Channel Scan

Press the PIP POSITION button.

Look at all of the stored channels on 9 windows.

Press the SCAN button to show all 9 windows on the screen.

Press the EXIT button to return to normal viewing.

■ Swapping the PIP

Press the SWAP button to switch between the Main and Sub pictures.

Basic Operation - continued

■ External Control Device Setup

Connect the RS-232 input jack to a control device (such as a computer or an A/V control system) in order to control the set's functions externally.

■ Connect External Equipment

< Back panel of the set > Y Pb Pc CPU/RESET S VIDE 21 RS-232 SERVICE device to the RS-232 jack on

Connect the serial port of the control device to the RS-232 jack on the set.

RS-232 connection cables are not supplied with the Monitor.

The Monitor remote control and front panel controls (except main power) will not be functional if the set is controlled by a PC computer or other external device.

■ D1 /5 ORTH CONNECTOR

Basic Operation - continued

Set ID

Press the MENU button and then ▲ / ▼ button to select the SETUP menu.

Press the ▶ button and then ▲ / ▼ button to select Set ID.

Press the ▶ button and then ◀ / ▶ button to adjust Set ID to choose the desired monitor ID number.

The adjustment range of Set ID is 1 - 99.

Use this function to specify a monitor ID number.

English

SETUP Language PD Control WXGA VGA Child Lock Front Light Caption Set ID OK MENU

Basic Operation - continued

RGB Mode / HDMI Mode

MODE	Resolution	Vertical Frequency (Hz)
DOS	640X350	70.0
	720X400	70.0
		85.0
VGA	640X480	60.0
		72.0
		75.0
		85.0
SVGA	800X600	56.0
		60.0
		72.0
		75.0
		85.0
XGA	1024X76B	60.0
		70.0
		75.0
		85.0
SXGA	1280X1024	60.0
WXGA	1280X76B	60.0
		75.0
	1360X76B	60.0
	1366X76B	60.0

DTV	480p/60
	720p/50
	720p/60
	1080i/50
	1080i/60

Specifications

		ASPV32-AVT ASPV40-AVT	ASPV46-AVT
Panel	Size (Diagonal)	80cm/32"	101cm/40"	116cm/46"
	Aspect Ratio	16:9	18:9	16:9
	Resolution	WXGA (1366x768)	WXGA (1366x768)	WXGA (1366x768)
	Brightness	500 cd/m2	500 cd/m2	500 cd/m2
	Contrast Ratio	5000:1 (Dynamic)	5000:1 (Dynamic)	5000:1 (Dynamic)
	Viewing Angle	ovr 178°	ovr 178°	ovr 178°
	Color Depth	16.7M colors	16.7M colors	16.7M colors
Audio	Speaker Output	15W x 2	20W x 2	20W x 2
	7 Band Equalizer	Y	Y	Y
	Audio Volume Leveler	Y	Y	Y
Input	RF Input	Y	Y	Y
	AV Input	AV1, AV2, AV3, S-VIDEO	AV1, AV2, AV3, S-VIDEO	AV1, AV2, AV3, S-VIDEO
	Component Input	Y	Y	Y
	PC Input (ISP D-SUB)	ANALOG INPUT	ANALOG INPUT	ANALOG INPUT
	PC Audio Input	L+R	L+R	L+R
	HDMI (HDCP, DVI)	2	3	3
	SPDIF (Optical) Output	Y	Y	Y
Output	AV Output	Y	Y	Y
	Headphone Output	Y	Y	Y
Features	Closed Captioning	Y	Y	Y
	V-Chip	Y	Y	Y
	Picture in Picture	Y	Y	Y
	4 Language Menu	English / French / Spanish / Portuguese	English / French / Spanish / Portuguese	English / French / Spanish / Portuguese
	Sleep Timer	Y	Y	Y
Weight		15.1kg / 33.3 lbs	23.6kg / 52.1 lbs	38.6kg / 65.1 lbs

Troubleshooting

Symptoms

graph TD
    A["No picture, no sound"] --> B["Sound OK, poor picture"]
    B --> C["Picture OK, poor sound"]
    C --> D["Picture blurred"]
    D --> E["Lines or streaks in picture"]
    E --> F["Poor reception on some channels"]
    F --> G["No color"]
    G --> H["Poor color"]
    H --> I["Remote control does not work"]
    I --> J["Incorrect position"]
    J --> K["Vertical bars or stripes on background"]
    K --> L["Horizontal noise"]
    L --> M["Signal Cable message appears"]
    M --> N["Check these items and try to adjust these"]

    subgraph Screen Grid
        direction LR
        O1["The mains plug (plugged in and switched on)"]
        O2["Is the TV switched on"]
        O3["Try another channel (weak signal)"]
        O4["Check aerial (plugged into TV?)"]
    end

References

NEC Monitor Customer Service & Support

Customer Service and Technical Support:	[phone]
	Fax: [phone]

Parts and Accessories/Macintosh Cable Adapter:

[phone]

Warranty Information:

www.necdisplay.com

Online Technical Support:

www.necdisplay.com

Sales Information Line:

[phone]

Canadian Customers:

[phone], Ext#: 4037

Government Sales:

[phone]

Government Sales email:

[e-mail]

Electronic Channels

World Wide Web:

www.necdisplay.com

Product Registration:

www.necdisplay.com

European Operations:

www.ncc-display-solutions.com

Drivers and Downloads:

www.necdisplay.com

Limited Warranty

NEC Display Solutions of America, Inc. (hereinafter "NEC DISPLAY SOLUTIONS") warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NEC DISPLAY SOLUTIONS' sole option) any part of the enclosed unit which proves defective for a period of one (1) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or unit may be new or refurbished and will meet specifications of the original parts or unit.

This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. This warranty is limited to the original purchaser of the Product and is not transferable. This warranty covers only NEC DISPLAY SOLUTIONS-supplied components. Service required as a result of third party components is not covered under this warranty. In order to be covered under this warranty, the Product must have been purchased in the U.S.A. or Canada by the original purchaser. This warranty only covers Product distribution in the U.S.A. or Canada by NEC DISPLAY SOLUTIONS No warranty service is provided outside of the U.S.A. or Canada. Proof of Purchase will be required by NEC DISPLAY SOLUTIONS to substantiate date of purchase. Such proof of purchase must be an original bill of sale or receipt containing name and address of seller, purchaser, and the serial number of the product.

It shall be your obligation and expense to have the Product shipped, freight prepaid, or delivered to the authorized reseller from whom it was purchased or other facility authorized by NEC DISPLAY SOLUTIONS to render the services provided hereunder in either the original package or a similar package affording an equal degree of protection. All Products returned to NEC DISPLAY SOLUTIONS for service MUST have prior approval, which may be obtained by calling 1-800-632-4662. The Product shall not have been previously altered, repaired, or serviced by anyone other than a service facility authorized by NEC DISPLAY SOLUTIONS to render such service, the serial number of the product shall not have been altered or removed. In order to be covered by this warranty the Product shall not have been subjected to displaying of fixed images for long periods of time resulting in image persistence (afterimage effects), accident, misuse or abuse or operated contrary to the instructions contained in the User's Manual. Any such conditions will void this warranty.

NEC DISPLAY SOLUTIONS SHALL NOT BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR OTHER TYPES OF DAMAGES RESULTING FROM THE USE OF ANY NEC DISPLAY SOLUTIONS PRODUCT OTHER THAN THE LIABILITY STATED ABOVE. THESE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.

This Product is warranted in accordance with the terms of this limited warranty. Consumers are cautioned that Product performance is affected by system configuration, software, the application, customer data, and operator control of the system, among other

APV32, APV40, APV46

PROPRIETARY NOTICE AND LIABILITY DISCLAIMER

The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Display Solutions of America, Inc. and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent said rights are expressly granted to others.

The NEC Display Solutions of America, Inc. product(s) discussed in this document are warranted in accordance with the terms of the Limited Warranty Statement accompanying each product. However, actual performance of each such product is dependent upon factors such as system configuration, customer data and operator control. Since implementation by customers of each product may vary, the suitability of specific product configurations and applications must be determined by the customer and is not warranted by NEC Display Solutions of America, Inc.

To allow for design and specification improvements, the information in this document is subject to change at any time without notice.

Reproduction of this document or portions thereof without prior approval of NEC Display Solutions of America, Inc. is prohibited.

DECLARATION OF CONFORMITY

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

U.S. Responsible Party: NEC Display Solutions of America, Inc.

Address: 500 Park Blvd. Suite 1100

Itasca, IL 60143

Tel. No.: [phone]

Type of Product: Computer Monitor