CW-SR1500-A - Radio REVO - Free user manual and instructions

USER MANUAL CW-SR1500-A REVO

Close-up of a black firearm rifle with barrel and trigger mechanism (no visible text or symbols)

15 mm Rod Support

Counterweight

for SR-1500

REVO

Specifications

Weight: 4.6 lb. (2 kg)

Height: 6.22" (15.8 cm)

Width: 3.07" (7.8 cm)

Depth: 0.86" (2.2 cm)

Warnings

-Please read and follow these instructions, and keep this manual in a safe place.

- Handle the unit with care.

- Keep out of reach of children.

-Clean the unit with a soft, dry cloth.

- Use only parts provided by the manufacturer.

- Make sure the item is intact and that there are no missing parts.

- All images are for illustrative purposes only.

-Make sure the socket screws of the CW-SR1500-A, as well as the black thumbscrews of the SR-1500 Shoulder Support Rig and all other attachments to the support rig are secure before proceeding.

- Do not attempt to repair any part of this product.

- Make sure all connections and attachments are secure before using.

- Keep this product away from water and any flammable gases or liquids.

Thank you for choosing Revo, and congratulations on your purchase of the Revo CW-SR1500-A Counterweight for the SR-1500 Shoulder Support Rig.

The Revo CW-SR1500-A Counterweight is a unique accessory for use with the SR-1500 Shoulder Support Rig, but it can be added to any 15 mm rod support system. It increases stability, relieves arm fatigue, and creates a more balanced system for easier maneuvering and handling of fully-loaded or front-heavy camera setups.

The CW-SRISOO-A provides everything necessary for easy attachment.

Components

Counterweight with threaded holes Mounting plate 2 Socket screws Hex wrench

Attaching the Counterweight to the SR-1500 Shoulder Support Rig

Note: It is recommended that you attach all accessories to the support rig before mounting the camera.

1 Attach the mounting plate by inserting the two included screws through the mounting plate and into the threaded holes of the counterweight. Tighten them with the included wrench.

Simple line drawing of a device with a mounted sensor and connected components (no text or symbols)

Important: the screws should turn easily into the holes of the counterweight. If you feel resistance when turning the screws, turn the counterweight over and repeat the previous instruction.

- Either set of holes on the mounting plate can be used depending on your preference. Using the holes in the center of the mounting plate will make the counterweight feel heavier.

Two identical line drawings of a mobile phone device with ports and buttons, no text or symbols present.

2 Attach the mounting plate and counterweight assembly to the support rig by loosening the black thumbscrew (turning counterclockwise) and sliding the assembly onto the rails at the back of the support rig.

Line drawings of two different firearm components with no visible text or symbols

3 Tighten the black thumbscrews (turning clockwise) so that the counterweight is secure and doesn't slide.

Line drawing of a mechanical device with a handle and lever (no text or symbols)

One-Year Limited Warranty

This Revo product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider's discretion, of any product that falls during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Revo Customer Service Department to obtain a return merchandise authorization ('RMA') number, and return the defective product to Revo along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser's own risk and expense.

For more information or to arrange service, visit www.revocinegear.com or call Customer Service at 212-594-2353.

REVO® 4. Good an Group Don't

Revo is a registered trademark of the Grados Group © 2017 Grados Group LLC, St Rights Reserved. Product warranty provided by the Grados Group, www.gpmlgroup.com

(2)