CW-SR1000-A - Radio REVO - Free user manual and instructions

Product Type	Counterweight for Shoulder Support Rig
Model	CW-SR1000-A
Brand	REVO
Weight	4.6 lb (2 kg)
Length	6.1 in (15.4 cm)
Width	3.3 in (8.5 cm)
Height	0.9 in (2.5 cm)
Compatibility	REVO SR-1000 Shoulder Support Rig
Materials	Metal (assumed)
Mounting Hardware Included	Mounting plate, hex screws (4), hex key
Installation	Attach mounting plate to shoulder pad, then counterweight to plate
Care Instructions	Clean with soft, dry cloth; handle with care
Safety Warnings	Use only manufacturer parts; ensure secure attachment before use
Warranty	1-year limited warranty against defects
Warranty Provider Contact	Revo Customer Service: 212-594-2353 or www.revocinegear.com
Country of Origin	Not specified (assumed China or USA)
Repairability	Not user-serviceable; contact manufacturer for repairs
Spare Parts Availability	Contact manufacturer or authorized retailers
Intended Use	Provides balance and stability for camera rigs

Frequently Asked Questions - CW-SR1000-A REVO

How do I attach the CW-SR1000-A counterweight to the SR-1000 rig?

First, align the screw holes in the narrow end of the angled mounting plate with the slot on the outside of the shoulder pad. Attach the mounting plate using two hex screws and the included hex key. Then, align the counterweight's screw holes with the mounting plate and secure with the remaining two screws.

What tools are required for installation?

The included hex key is the only tool needed. All necessary screws are provided.

What is the weight of the counterweight?

The counterweight weighs 4.6 lb (2 kg).

What are the dimensions of the CW-SR1000-A?

Length: 6.1 in (15.4 cm), Width: 3.3 in (8.5 cm), Height: 0.9 in (2.5 cm).

Is the CW-SR1000-A compatible with other shoulder rigs?

The counterweight is specifically designed for the REVO SR-1000 Shoulder Support Rig. Compatibility with other rigs is not guaranteed.

How should I clean the counterweight?

Clean the unit with a soft, dry cloth. Do not use liquids or abrasives.

What is the warranty on this product?

The REVO CW-SR1000-A comes with a one-year limited warranty against defects in materials and workmanship for the original purchaser.

How do I obtain warranty service?

Contact Revo Customer Service at 212-594-2353 or visit www.revocinegear.com to obtain an RMA number. Return the defective product with proof of purchase.

What should I do if I encounter resistance when tightening the screws?

If you feel resistance, stop and turn the counterweight over, then repeat the alignment and attachment steps. The screws should go in easily.

Can I order spare parts for the CW-SR1000-A?

Contact Revo or authorized retailers for spare parts. Use only manufacturer-provided parts to ensure safety and compatibility.

USER MANUAL CW-SR1000-A REVO

Black REVO-branded electronic device with a curved handle and mounting bracket (no visible text or symbols)

Shoulder Support Rig

Counterweight

for SR-1000

REVO®

Thank you for choosing Revo, and congratulations on your purchase of the Revo CW-SR1000-A Counterweight for the SR-1000 Shoulder Support Rig.

The CW-SR1000-A provides everything necessary for easy attachment.

Components

Warnings

- Please read and follow these instructions, and keep this manual in a safe place.

- Handle the unit with care.

- Clean the unit with a soft, dry cloth.

- Use only parts provided by the manufacturer.

- Make sure everything is secure before proceeding.

• Make sure the item is intact and that there are no missing parts.

-All images are for illustrative purposes only.

Attaching the counterweight to the SR-1000 Shoulder Support Rig

1 Align the screw holes in the narrow end of the angled mounting plate with the slot on the outside of the shoulder pad.

Line drawing of a curved mechanical component with mounting holes (no text or symbols)

2 Attach the mounting plate by threading two of the included hex screws through the slot and into the screw holes. Use the included hex key to fasten the screws until fully tightened.

Line drawing of a curved mechanical component with mounting holes and a handle (no text or symbols)

3 Align the counterweight's screw holes with the corresponding screw holes on the outside of the mounting plate.

Technical line drawing of a mechanical component with no visible text or symbols

4 Attach the counterweight by threading the remaining two screws through the mounting plate and into the counterweight. Use the hex key to fasten the screws until fully tightened.

Line drawing of a mechanical linkage or bracket with a base and mounting bracket (no text or symbols)

Important: The screws should go easily into the holes of the counterweight. If you feel resistance when turning the screws, turn the counterweight over and repeat the previous instruction.

Line drawing of a curved mechanical bracket or clamp (no text or symbols)

Specifications

Weight: 4.6 lb. (2 kg)

Length: 6.1" (15.4 cm)

Width: 3.3" (8.5 cm)

Height: 0.9" (2.5 cm)

One-Year Limited Warranty

This Revo product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider's discretion, of any product that falls during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Revo Customer Service Department to obtain a return merchandise authorization ("RMA") number, and return the defective product to Revo along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser's own risk and expense.

For more information or to arrange service, visit www.revocinegear.com or call Customer Service at 212-594-2353.

| REVO

L+crude

Resin is a registered Inalienack of The Cardinal Group

© 2018 Gradus Group LLC. All Rights Reserved

Enquired exclusively provided by the Directors Group.

www.gractusgroup.com

CCE