RB-ALUCASE+02B - PC Case Joy-It - Free user manual and instructions
Find the device manual for free RB-ALUCASE+02B Joy-It in PDF.
User questions about RB-ALUCASE+02B Joy-It
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your PC Case in PDF format for free! Find your manual RB-ALUCASE+02B - Joy-It and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RB-ALUCASE+02B by Joy-It.
USER MANUAL RB-ALUCASE+02B Joy-It
natural_image
Black rectangular electronic device casing with ports and connectors (no visible text or symbols)Joy-IT Raspberry Pi3 Industry Aluminum-Case
incl. Dinrail-Holder
Index
- Introduction
- Assembling
- Support
1. Introduction
Dear customer,
Thank you for choosing our product.
In the following we will show you how to use your product.
If you encounter any unexpected problems during use, please feel free to contact us.
2. Assembling
First, the brass spacers are attached to the Raspberry Pi.
These are inserted through the holes on the underside of the Raspberry Pi and screwed on the top side with the enclosed nuts.
natural_image
Green printed circuit board with multiple electronic components and gold contacts (no readable text or symbols)
natural_image
Close-up of a green Raspberry Pi circuit board with visible components and mounting points (no readable text or symbols)
natural_image
Close-up of a green printed circuit board with visible traces and components (no readable text or symbols)Now push the Raspberry Pi into the case.
Please make sure that the Audio, HDMI & Micro-USB connector is located in the openings of the case.
Now the Raspberry Pi can be screwed to the housing on the bottom.
natural_image
Black electronic device with three Ethernet ports and a red-labeled connector (no text or symbols visible)
natural_image
Close-up of a black plastic electronic component with four mounting holes and a green internal structure, no visible text or symbols.Now the covers can be fixed with the screws.
natural_image
Close-up of a black electronic device rear panel showing three Ethernet ports with red circular markers pointing to ports (no text or symbols visible)
natural_image
Black plastic electronic component with four red circular markers on its side (no text or symbols visible)3. Support
We also support you after your purchase. If you encounter any problems or if there are any questions left please feel free to contact us by mail, phone or by our ticket-supportsystem on our website.
E-Mail: service@joy-it.net
Ticket-System: http://support.joy-it.net
Please visit our website for more informations:
www.joy-it.net