RB-ALUCASEP4+01B - Boîtier Joy-It - Free user manual and instructions

USER MANUAL RB-ALUCASEP4+01B Joy-It

Black Jouv-it device with ports and ports, no visible text or symbols on body

Exterior view of a white rectangular electronic device with perforated top surface and internal ports (no text or symbols visible)

1. GENERAL INFORMATION

Dear customer,

Thank you for purchasing our product. In the following, we will show you which things should be noted during the use.

Should you encounter any unexpected problems, do not hesitate to contact us.

2. ASSEMBLY

1. Place the Raspberry Pi 4 in the housing base and srew it down with the silver screw.

Black metal panel with mounting holes and a small hole at the bottom (no text or symbols visible)

R021 Hospdberry Pi 著 Roscopercy Pi 2016 LUN GLOBAL ER FCC 1D 2AMCB-RP140 C: 20853-RP140 CE FC Made in the UK HDMI

1. Now you can slide the sides into the bottom of the housing and screw them tight.

Interior view of a Raspberry Pi connected to an open circuit board, showing internal components and external housing (no text or symbols visible)

Black textured surface with four red square markers highlighting corner points (no text or symbols)

1. Now insert the top on the side parts and screw it tight. Now you are finished with the assembly.

Two black metal panel substrates with perforated surfaces and small electronic components, no visible text or symbols.

3. OTHER INFORMATION

Our Information and Take-back Obligations according to the German Electronic Law (ElektroG)

Symbol on Electrical and Electronic Products:

This crossed-out bin means that electrical and electronic products do not belong into the household waste. You must hand over your old appliance to a registration place. Before you can hand over the old appliance, you must remove used batteries and replacement batteries which are not enclosed by the device.

Return Options:

As the end user, you can hand over your old appliance (which has essentially the same functions as the new one bought with us) free of charge for disposal with the purchase of a new device.

Small devices, which do not have outer dimensions bigger than 25 cm can be handed in for disposal independently of the purchase of a new product in normal household quantities.

1. Possibility of return at our company location during our opening hours Simac Electronics Handel GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn

2. Possibility of return nearby

We will send you a parcel stamp with which you can send us your old appliance free of charge. For this possibility, please contact us via e-mail at [e-mail] or via telephone.

Information about Package:

Please package your old appliance safe for transport. Should you not have suitable packaging material or you do not want to use your own material, you can contact us and we will send you an appropriate package.

4. SUPPORT

If any questions remained open or problems may arise after your purchase, we are available by e-mail, telephone and ticket support system to answer these.

E-Mail: [e-mail]

Ticket-system: http://support.joy-it.net

Telephone: [phone] - 66 (10 - 17 o'clock)

For further information visit our website:

www.joy-it.net