99-7526B - Kit d'installation auto Metra - Free user manual and instructions

USER MANUAL 99-7526B Metra

Interior view of a car showing the air intake console and dashboard (no visible text or symbols)

Mazda 3 2014-up\*

*Visit MetraOnline.com for up-to-date vehicle specific applications.

KIT FEATURES

• ISO DIN radio provision with pocket
- Painted matte black

KIT COMPONENTS

• A) Radio trim panel (a) • B) Radio trim panel (b) • C) Radio housing base • D) Radio brackets • E) Radio support bracket • F) (4) Panel clips
• G) (2) #8 x 1/2" Phillips screws

AE

Technical line drawing of a U-shaped metal bracket with mounting flanges (no text or symbols)

-

• 

D

E

F

G

TABLE OF CONTENTS

Dash Disassembly 2

Kit Preparation 2

Kit Assembly 3

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: 70-7903L (without amp)

Antenna Adapter: 40-HD10L

Steering wheel control interface: ASWC-1 & AX-MAZ28SWC-6V (will also retain backup camera)

TOOLS REQUIRED

• Panel removal tool
• Phillips screwdriver
  • 10mm Socket wrench • 1/8" drill bit

CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.

DASH DISASSEMBLY KIT PREPARATION

1. Unclip and remove the dashboard trim panel above the glovebox. This panel will also include the middle a/c vents. (Figure A)
2. Remove (1) 10mm screw securing the radio, then unclip, unplug, and remove the radio. (Figure B)

Continue to Kit Preparation

Interior view of a car dashboard and infotainment system (no text or symbols visible)

(Figure A)

Interior view of a car showing the dashboard, air vent, and control panel (no text or symbols visible)

(Figure B)

1. Secure the radio support bracket to the sub-dash using the factory 10mm screw removed in dash disassembly. Directly above this is the factory radio support brace. Bend this towards the front of the vehicle to allow room for the aftermarket radio. (Figure A)
2. Remove the panel clips from the factory radio, then attach them onto the radio housing base. (Figure B)
3. Clip the radio housing base to the dash. (Figure C)

Continue to Kit Assembly

Diagram of a mechanical assembly with a tool and directional arrow, no visible text or symbols

(Figure A)

Technical line drawing of a car interior frame with no visible text or symbols

(Figure B)

Interior view of a car showing the dashboard and air vent (no text or symbols visible)

(Figure C)

KIT ASSEMBLY

1. Attach the (4) panel clips provided onto the radio trim panel (a). (Figure A)
2. Remove the metal DIN sleeve and trim ring from the aftermarket radio.
3. Attach the radio brackets to the radio using the screws supplied with the radio. (Figure B)
4. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation.

Note: The wiring harness and antenna connector are located in the passenger kick panel, except for the 2014 i-Sport.

Technical line drawing of a mechanical bracket with hanging weights (no text or symbols)

(Figure A)

Technical line drawing of a mechanical device with labeled ports and components (no text or symbols)

(Figure B)

1. Insert the radio into the sub-dash and secure it using the (2) Phillips screws provided. New screw holes will have to be drilled into the sub-dash. Either drive the screws in, or pre-drill the holes with a 1/8" drill bit.
2. Attach radio trim panel (a) to the assembly.
3. Starting from the bottom, attach radio trim panel (b) to the assembly.
4. Reassemble the dash in reverse order of disassembly to complete the installation.

Meta®

99-7526B

INSTALLATION INSTRUCTIONS

IMPORTANT

If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by supplying in the most recognized and supported

mobile electronics school in our industry.

Log onto www.installennstitute.com or call

800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians