FPMA-D1110 - Support de panneau plat Newstar - Free user manual and instructions

Product Type	Flat Panel Mount
Brand	Newstar
Model	FPMA-D1110
Compatible VESA Patterns	75x75 mm, 100x100 mm
Max Screen Size	27 inches
Max Weight Capacity	15 kg
Tilt Range	+15° / -15°
Swivel Range	±90°
Rotation	0° (fixed)
Material	Steel
Color	Black
Distance from Wall	10 mm
Installation Type	Wall mount with included hardware
Package Contents	Mount bracket, screws, wall anchors, manual
Warranty	2 years
Certifications	RoHS compliant
Maintenance and Cleaning	Wipe with a soft, dry cloth. Do not use harsh chemicals.
Safety	Do not exceed weight limit. Ensure secure wall attachment. Use appropriate anchors for wall type.
Spare Parts and Repairability	Spare parts not available separately. Contact support for replacement.
General Information	Designed for VESA-compliant flat panels. Suitable for most monitors and TVs up to 27 inches.

Frequently Asked Questions - FPMA-D1110 Newstar

How do I install the FPMA-D1110 mount?

First, attach the mounting bracket to the wall using the included screws and anchors suitable for your wall type. Then, align the VESA plate on the back of your monitor and secure it with the provided screws. Finally, hang the monitor onto the wall bracket and tighten the locking mechanism.

What VESA patterns does the FPMA-D1110 support?

It supports standard VESA patterns of 75x75 mm and 100x100 mm.

Is this mount compatible with a 24-inch monitor?

Yes, the FPMA-D1110 is compatible with monitors up to 27 inches and VESA 75x75 or 100x100. A 24-inch monitor typically uses one of these patterns.

Can I tilt the screen with this mount?

Yes, this mount offers a tilt range of +15° to -15° to reduce glare and improve viewing angle.

Does it allow swiveling?

Yes, the mount provides a swivel of ±90° for flexible orientation.

What tools are needed for installation?

You will need a Phillips screwdriver and a drill (for wall anchors if mounting on drywall or concrete). All necessary screws are included.

How much weight can the FPMA-D1110 hold?

The maximum weight capacity is 15 kg (33 lbs). Do not exceed this limit to ensure safety.

Does the mount come with screws for my monitor?

Yes, the package includes a set of M4, M5, and M6 screws along with spacers to fit most monitors.

Can I mount it on a concrete wall?

Yes, but you must use suitable concrete anchors (included) and drill pilot holes. Follow the manual for proper installation.

How do I clean the mount?

Clean the mount with a soft, dry cloth. Avoid using water, solvents, or abrasive cleaners to prevent damage.

USER MANUAL FPMA-D1110 Newstar

NewStar user's Manual

LCD Monitor Arm

FPMA-D1110.FPMA-D1120.FPMA-D1130

Technical line drawing of a mechanical clamp assembly mounted on a base frame, with no visible text or symbols.

NEWSTAR

computerproducts

www.NewStar.nl

Phone: [phone]

Check-List

01

To mount your flat panel monitor or any parts at an ergonomically correct position, start at step 1 and continue as directed.

Part Check-List

FPMA-D1130

FPMA-D1120

FPMA-D1110

Clamp Check-List-

01

X1

02

X1

03

FPMA-D1110(not provided)(5mm)

X1

Tool Check-List

(5mm)

X1

(4mm)

X1

X4

X4

LCD Monitor Arm

LCD Monitor Arm Range of use angle:
FPMA-D1130

PMA-D1130 50 200 70 37 55 50.5 20 24 340-80° 104.5 15-40° 40° 180° 190° 200° 180°

FPMA-D1120

125 200 55 35.5 24 246-365 104.5 125-85 80 180° 260° 180°

FPMA-D1110

120 55 80.5 240-805 104.5 10-305 30 180° 180° 180°

Unit : mm

Assembly Guide

02

Step 1 "Clamp" assembly step

Adhere the pad to the clamp base. Desk thickness from 15mm\~70mm. Then fix the clamp on the desk. If desk thickness over 70mm, please adjust screws with 5mm Allen Key. (as figure a.)

Adhere 15-10mm

15mm Fig. a (5mm)

Step 2 "Pole" assembly step

First, take the plastic cover up, than use 4mm Allen Key to secure the pole and clamp with 4 screws. Final, put the plastic cover down and check the pin position with the screw together. (as figure b.)

Fig. b Notice: □ Please take the plastic cover up (# figures left), when assemble the pol clamp on the des

Notice:

☐ Please take the plastic cover up (as figures left), when you assemble the pole with clamp on the desk.

Step 3

(1) Please loosen the knob at frist, and then apart the fixing lump.
(2) Then, take VESA up

(1)

Please avoid to pinch your hand during assembling the arm. (fixing lump)

(2)

Mechanical assembly diagram showing a bracket with mounting holes and a separate cross-shaped component (no text or symbols)

Step 4

Place LCD with facing downward on flat surface. Place VESA on the LCD back as figure and align to the screwholes. Secure them together with four screws. And then tighten them up with screwdriver(not provided).

75mmx75mm 100mmx100mm VESA interface.

X4 00/185 UPWARD

Adjusting the arm height as follows

1
Please move arm to flat position first.

Mechanical linkage assembly diagram showing a lever mechanism with rotating arm (no text or labels)

2

Loosen the knob by two cycle clockwise direction.

two cycle Note To stop action when see red sign.

③
Please move arm to flat position as figure 1. Then use one hand to push down from the top of pole.

Technical line drawing of a mechanical clamp or valve assembly with a 246-365 dimension label (no text or symbols on the diagram itself)

4

Tighten the knob by counterclockwise direction to secure arm.

Assembly Guide

Step 5

Insert the VESA(with LCD display on already)into the arm and press it down. Then secure fixing lump on VESA with knob. (as figure down step 1.2.3)

Upward Please avoid to pinch your hand during assembling the arm. ① ② ③

Step 6

(1) Use cable tie supplied to finish cable management.
(2) When the screw is loose, please use the Allen Key(5mm) to tighten the arm.

(1) Upward Cable tie

(2)

Not loosen (5mm)

Cautions

Mechanical linkage diagram showing a bracket with arrows indicating motion direction (no text or symbols)

0 Fig.2

Fig. 3

# Fig.4

Not loosen Fig.5

Fig. 6