KEW 8178 - Measuring Equipment Kyoritsu - Free user manual and instructions

Product Type	Digital Clamp Meter
Brand	Kyoritsu
Model	KEW 8178
Dimensions (approx.)	250 x 100 x 50 mm
Weight (approx.)	300 g
Power Supply	9V battery (6F22 or equivalent)
Display	4000 counts LCD with backlight
AC Current Range	0-1000 A
DC Current Range	0-1000 A
AC Voltage Range	0-600 V
DC Voltage Range	0-600 V
Resistance Range	0-40 MΩ
Capacitance Range	0-100 µF
Frequency Range	0-10 kHz
Diode Test	Yes
Continuity Buzzer	Yes
Safety Rating	CAT III 600V
Auto Range	Yes
Data Hold	Yes
Max Jaw Opening	40 mm
Maintenance	Clean with a dry cloth; replace battery when low
Included Accessories	Test leads, carrying case, battery, manual
Spare Parts Availability	Battery and test leads are replaceable

Frequently Asked Questions - KEW 8178 Kyoritsu

How do I measure AC current with the KEW 8178?

Turn the dial to the AC current range (A~). Clamp the jaw around a single conductor. The reading appears on the display. Ensure the conductor is centered for accuracy.

What battery does the KEW 8178 use?

It uses a standard 9V battery (6F22 or equivalent). When the battery icon appears, replace it promptly.

How do I measure resistance?

Select the resistance (Ω) range. Connect the test leads to the component. The meter will display resistance. For best results, ensure the circuit is de-energized.

Is the KEW 8178 auto-ranging?

Yes, it features auto-ranging for most functions, but you can manually select ranges if needed.

What is the safety rating of the KEW 8178?

It is rated CAT III 600V, suitable for measuring in building installations and distribution boards.

Can I measure DC current?

Yes, the KEW 8178 can measure DC current up to 1000 A. Use the DC current range (A=) and ensure proper zero adjustment before measurement.

How do I test continuity?

Turn the dial to the continuity/beep position. Touch the probes together; a beep confirms continuity. Then connect to the circuit under test.

What does the 'Data Hold' button do?

Pressing the Data Hold button freezes the current reading on the display for later viewing. Press again to release.

How do I maintain the clamp meter?

Keep it clean and dry. Wipe the casing with a damp cloth if necessary. Do not use solvents. Store in the carrying case when not in use.

What is the maximum conductor size for the clamp?

The jaw opens up to 40 mm, accommodating conductors up to about 500 MCM or a busbar.

USER MANUAL KEW 8178 Kyoritsu

Two medical imaging devices with digital display and device labels (no readable text or symbols)

for Leakage Current Clamp Sensor

CLAMP SENSOR Series

KEW 8177/8178

© KLM 8102 8176 for mechanical clamp sensor (Sensor) has been designed, manufactured and best according to UC 8100. Salary requirements for Electronic Electronics apparatus, and delivered in the test collector who passenger publicly control tools. The utilization manual contains warnings and safety rules which have to be observed by the user to ensure safe operation of the Sensor and to maintain it in safe condition. Therefore, read through these operating instructions before using the Sensor.

WARNING - Read through and understand instructions contained in this manual before starting to use the Sensor. - Keep the manual of hand to enable quick reference whenever necessary. - The Sensor as to be used only on its extended replacement. - Undescended and follow all the safety instructions combined at the manual. If a manufactured part the above instructions are adhered by. Future to follow the above instructions may cause injury and or damage the Sensor.

The symbol ^A marked on the Sonso, means that the user must refer to the related parts in the manual for whole operation of the Sonso. It is essential to read the instructions wherever ^A symbol appears in the manual.

△ DANGER is reserved for conditions and actions that can have to cause serious or fatal injury. △ WARNING is reserved for conditions and actions that can cause serious or fatal injuries. △ CAUTION is reserved for conditions and actions that can have a minor injury or damage the Services.

- DANGER - Do not attempt to make measurement in the presence of Fanmable genes. Consider, I'm use of the Sensor may increase spiking, which can be found in an example. - When unselected protection genes to reduce the rates such as a mechanism attack in the working space. - Never make measurement in CAT III environment if elected potentials of 300 VAC or higher occur in the circuit to be tested. - Do not assume the maximum allowable impact of any measuring手段. - The Sensor is to be used only by its internal applications to find them. - Otherwise, safety functions equipped with the Sensor will not work, see the Sensor damage or serious personal injury may occur. - Very proper action on a known course before acting to use the Sensor.

• Do not make measurement when thunder numbling. If the Sensor is in use, stop the measurement immediately and remove the Sensor from the measured object.
  The transformer past are designed no so not to show-cruiting the effect under loss; however, he especially raised about the periodic shock where the measured impact can remain undetected.
  ● Never attempt to use the Sensor if it's surface or your hand is well.
  △ WARNING
  ● Observe keep your fingers and hands behind the carmer on the Street to avoid the proclining which touched.
  ● Never attempt to make any measurement, if any abnormal
  сметалей или техноз, auch на Technique Science, AND Representation of parts.
• Do not revisit substitute parts or make any modification to the Sensor.
  Return the Soncoe in your local distribution for repair a social lesion in public supported body regeneration.
  (二) 本报告标题为“《关于公司2017年度利润分配预案的议案》”。
• CAUTION ● The Sensor is not dust nor water proof. Don't use the Sensor at
  clusty places or to be spattered.
  Take a lot of rams in snow shock when carding the sense and sien to prevent lough sublamps from snow shock between the
  transformer pass.
• Do not stop on or put on the cable to proven. The jacket of calls from being damaged.
• Do not bend or pull the cable of the clamp sensor.
• General clamping line is for limited width clamps only
• Contact: 1983; 2004; 2005; 2006; 2007; 2008; 2009; 2010; 2011; 2012; 2013; 2014; 2015; 2016; 2017; 2018; 2019; 2020; 2021; 2022; 2023; 2024; 2025; 2026; 2027; 2028; 2029; 2030; 2031; 2032; 2033; 2034; 2035; 2036; 2037; 2038; 2039; 2040; 2041; 2042; 2043; 2044; 2045; 2046; 2047; 2048; 2049; 2050; 2051; 2052; 2053; 2054; 2055; 2056; 2057; 2058; 2059; 2060; 2061; 2062; 2063; 2064; 2065; 2066; 2067; 2068; 2069; 2070; 2071; 2072; 2073; 2074; 2075; 2076; 2077; 2078; 2079; 2080; 2081; 2082; 2083; 2084; 2085; 2086; 2087; 2088; 2089; 2090; 2091; 2092; 2093; 2094; 2095; 2096; 2097; 2098; 2099;
• On oil, propane the Sambor to direct sunlight. High temperature,
  ● Never give shocks, such as vibration or drop, which may damage
  the Sensor ● Use a game ship and document for cleaning the Fares. Do not
• Use of clamp gel and vorgent for cleaning the gel gel. Do not use abrasives or solvents.
  Safety symbol
  小. Just just refers to the provisions in the extension manual.
  出 0.21 × 0.24 × 0.25 × 0.26 × 0.27 × 0.28 × 0.29 × 0.30 × 0.31 × 0.32 × 0.33 × 0.34 × 0.35 × 0.36 × 0.37 × 0.38 × 0.39 × 0.40 × 0.41 × 0.42 × 0.43 × 0.44 × 0.45 × 0.46 × 0.47 × 0.48 × 0.49 × 0.50 × 0.51 × 0.52 × 0.53 × 0.54 × 0.55 × 0.56 × 0.57 × 0.58 × 0.59 × 0.60 × 0.61 × 0.62 × 0.63 × 0.64 × 0.65 × 0.66 × 0.67 × 0.68 × 0.69 × 0.70 × 0.71 × 0.72 × 0.73 × 0.74 × 0.75 × 0.76 × 0.77 × 0.78 × 0.79 × 0.80 × 0.81 × 0.82 × 0.83 × 0.84 × 0.85 × 0.86 × 0.87 × 0.88 × 0.89 × 0.90 × 0.91 × 0.92 × 0.93 × 0.94 × 0.95 × 0.96 × 0.97 × 0.98 × 0.99 × 1
  instrument with double or rainforced insulation
  relieves that this return can blow on the have on course when the collapse is by a light is below. (Cuffe-Gourland-Early village
  against the industry: 500 million Company
  \~ AD
  Crossed out wheel bin symbol (according to IEEE Directive)
  3022841-C) marking that the electrical product may be present as household waste, but just I must be accelerated and
• тягні: нікітня

Measurement Category

To ensure safe operation of measuring instruments, IEC 61010 establishes safety standards for various electrical environments, categorized as G to CAT IV, and cited measurement categories. High-circumscribed categories represent to medical environments with greater momentary energy, so a measuring instrument designed for CAT III measurements can further generate momentary energy based for CAT II.

Office One: Circuits which are not directly connected to the mains

power supply. CAT II : Electrical circuits of equipment connected to an 4C

2.41 of the primary commercial sector of the equipment companies directly to the distribution panel and smokers from the

distribution pare to outlets. CST. V. The city has the service drip to the reverse export

and to the power meter and primary overcurrent

protection device (distribution panel)

2. Features

- KSW 2177: 8178 are clamp sensors in trans-cre arc voltage

- Poresby the best shares which are certified and made

with our KEW 505C for leakage luggage.

- Designed to meet EC 61010-2-032 (CAT III. Pollution degree 2)

1. Sensor layout
   

Barrier provides protection against electrical shock and securing the

required minimum an and procedure instances. Show your fingers behind the barrier during a measurement.

4. DIN plug pin assignment

● Акция (соки) хлока не рот индикател, Meeting the info; защая

from spiral arcminor port. The frame of the pH arrangement of corona-laminol is symmetrical at steps frame.

● Power to the Surface is supplied from KEV 5050 in packs. Demand

- The internal memory stores the information about sensor types

serial no. and phase occlusion value. The Sensor is automatically

* (EVA SSO) is on for business revenue which are a reference value.

Input, kinned and four earned input hamnds and cur masons

and record resistive discharge current (up to four systems. For by space and hiccings, please see the instructions manual for

1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 500.

5. Operating instructions

RANGER

The rated ground-to-voltage is CAT III 300 V. Never made
The International, the potential of the electrical under test, exceeds 300 V.
the project write (ref: Inwood, be especially special noted. The
patriotikar sharing; W-AR & A-THA/CHEN SEJES: The CIP-SPINION CONDUCTORS.
- Taxe sufficient care to avoid shock, vibration or expensive line
when handling the Sensor. Otherwise, precisely adjusted
- When transforma jewe do not fully close, never try to close them
By force, but make them free to move and try again. If a foreign substance is quick in the way, return is
● Hold the meeting part (except for the cable) and disconnect the
output terminal from the measuring instrument so as not to cause a peak in the cable.
● Do not physically open the pass if they are loosen

单位：元

DISTRIBUTOR

KYORITSU ELECTRICAL

INSTRUMENTS

WORKS, LTD.

2-5-20 Nakano, Meguro-ku,

Tokyo, 152-0133 Japan Phone: [phone]

Fax: [phone]

Factory: Ehime, Japan

www.kew-ltd.co.jp

1122

2020

Notes:

The Sensor is dedicated to our "KEW 5000 for Leakage Logge". When connecting to our other models, such as KEW 5010.0120, the sensor auto-detecting function doesn't work

- Ensure that the transformer pipe are fully closed while clamping into a conductor to be tested, otherwise, accurate measurements cannot be taken. Sep 6. Specification in this manual for medium conductor use.

Sensitive transformer just are used for package clumps sensor because of the characteristics of epitome type transformer, it is impossible to eliminate the interference of estero magnetic field complexity. If there is a presence of strong magnet field, use the Sensor and distance as far as possible from it. The following are the total things which penetrate magnetic fields.

: Cenau

- Equipment which has made

(1) Attach the solar markets, supplied with KEW 5050 to change sensors for easy recognition. Colors of the market are harmonized with teal of current input terminals (red: A1, yellow: A2, blue: A3, green: M).

(2) Connect the output terminal to the current input terminal on KEW 5060. (3) Power on KEW 5050 and walk for a while until the connected sensor is identified. Sensor selection can be performed or "Black setting" screen. See '6.2 Busn settings' in the menu for KEW 5060 in the decade.

(a) Canned the clamp sensor and the voltage load lead properly.

Single phase 2-wire

graph TD
    A["Engine 1"] --> B["Actuator 1"]
    B --> C["Pressure Relief Valve"]
    C --> D["Stage-phase 3-arm"]
    D --> E["Actuator 2"]
    E --> F["Pressure Relief Valve"]
    F --> G["Three-phase 3-arm"]
    G --> H["Actuator 3"]
    H --> I["Pressure Relief Valve"]
    I --> J["Three-phase 3-arm"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333
    style F fill:#ffc,stroke:#333
    style G fill:#cfc,stroke:#333
    style H fill:#fcc,stroke:#333
    style I fill:#cfc,stroke:#333
    style J fill:#fcc,stroke:#333

[5] Lesons that the arrow mark on the clump sensor people loessers and saw lessons mailed at such tree movement. Ensure that the loss is the slumme paws see limits closed.

1. Specifications

Model name	NC 61217	RC 901175
Rated current	310 (rms) AC (14.1 MHz)
Output voltage	590 mV AC 10 AAG (50 min Ax
Measuring torque	6 - 10 AAG
Accuracy	-1.50% (≥0.05% max) /50 (20 Hz)
(p-up time max)	-4.50% (≥0.05% max) /20 - 5 Hz, with output at 100Hz or more
Phase characteristics	Within 2.1°C: 48 - 70 Hz while confirming with KEW 50Hz, lower than 100% or more of KEW 050Hz (balance current, in kg)
Current consumption	5.5 mA max
Temperature & temperature range	23.5°C, relative humidity 58% or less (no conductor scale)
(II-turium channel area max)
Operating temperature & TUR/KEG	-10 to 60°C, relative humidity by 56% or less
Storage temperature & temperature range	-20 to 40°C, relative humidity by 50% or more (no conductor scale)
Max. allowable rate*	100 A/min AG, set up max. (40 - 70 Hz)
Output impedance	Approx. 100 C or load impedance, 50 C or less
Location for use	20000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Appliance standard	IEC 01010-1, IEC 01010-2-002
	CAT 110 50 V Polution degree 2
	IEC 01010-28 (1MHz)
Environmental standard	EU 64000000000000000000
Vitochrome voltage	3470 V AC max. 60 V 50-kg to 5 kg
	Any capacity at engaged areas, endocrations, 100V max.
Performance saturation	50 V DC max. (1000 V)
	Any concentration of reference, minimum, maximum, maximum
Conductance ratio	Approx. 3cm max	Approx. 269 mm max
Outer conductivity	124, 1240mA/Ω/m2	1991.1240A ± 210μm
Cable length	Approx. 3cm
Weight	Approx. 260 g	Approx. 260 g
Accessories	Initial contact motor, Current contact motor, KEW 87-77 M, 0005, KEW 87-78 M, 000492

3) Alcoholic and various in the case of in control operators. According to not guaranteed or current inputs higher than the rated current. 4) Carrying case and passed with the comp. source supplied as standard accessory.

MEMO