E310 - Uncategorized DJI - Free user manual and instructions
Find the device manual for free E310 DJI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drone Propulsion System (Motor & Propeller Set) |
| Motor Model | DJI 2312 |
| Motor Dimensions | Diameter 27.9 mm, Height 30.6 mm |
| Motor Weight | 33 g each |
| Propeller Model | DJI 9450 (Self-tightening) |
| Propeller Diameter | 9.4 inches (239 mm) |
| Propeller Pitch | 5.0 inches |
| Propeller Weight | 4 g each |
| Total Set Weight (4 motors + 4 props) | Approx. 148 g |
| Power Supply | 4S LiPo (14.8 V) |
| Max Thrust per Motor | Approx. 400 g at full throttle |
| ESC Requirement | 15A (compatible with DJI E310 ESC) |
| Mounting Hole Distance | 16 mm x 19 mm (M3 screws) |
| Compatible Drones | DJI Phantom 3, F450, F550, and DIY quadcopters |
| Main Primary Function | Propulsion and flight stability for multirotor drones |
| Maintenance | Clean with dry cloth; avoid moisture; check propeller balance regularly |
| Safety Warnings | Keep away from spinning propellers; disconnect battery before handling |
| Spare Parts Availability | Motors, propellers, screws, and ESCs sold separately |
| Repairability | Motors can be replaced; propellers are consumables |
Frequently Asked Questions - E310 DJI
What is the DJI E310?
The DJI E310 is a propulsion system designed for multirotor drones, consisting of four 2312 motors and four 9450 self-tightening propellers, commonly used with DJI Phantom 3 and other DIY builds.
What are the specifications of the DJI E310 motors?
Each motor is a 2312 brushless motor with a diameter of 27.9 mm, height 30.6 mm, and weight of 33 g. It operates on a 4S LiPo battery and requires a 15A ESC.
What propellers does the DJI E310 use?
The E310 uses DJI 9450 propellers, which are 9.4 inches in diameter with a 5.0 inch pitch, and weigh approximately 4 g each. They feature a self-tightening design.
How much thrust can the DJI E310 generate?
Each motor can produce up to approximately 400 g of thrust at full throttle on a 4S battery, resulting in a total thrust of about 1600 g for a quadcopter.
Is the DJI E310 compatible with the DJI Phantom 4?
No, the E310 is primarily designed for the DJI Phantom 3 and similar DIY frames. The Phantom 4 uses a different propulsion system.
How do I install the DJI E310 motors?
Mount each motor to the arm using M3 screws with a 16mm x 19mm hole pattern. Connect the motor wires to the corresponding ESC outputs, ensuring correct rotation direction.
How should I maintain the DJI E310 system?
Regularly clean the motors and propellers with a dry cloth to remove dust. Check propeller balance and replace any damaged parts. Avoid exposure to moisture.
Where can I buy spare parts for the DJI E310?
Spare motors, propellers, screws, and ESCs are available from DJI authorized dealers or online retailers like Amazon and eBay. Ensure genuine parts for optimal performance.
How do I balance DJI 9450 propellers?
Use a propeller balancer to check weight distribution. Add small pieces of tape to the lighter blade until balanced. Balanced props reduce vibration and improve flight quality.
What should I do if a motor fails to start?
Check connections, ESC calibration, and battery voltage. Ensure the motor is not physically obstructed. If the motor buzzes but doesn't spin, it may be a loose bullet connector or a faulty ESC.
User questions about E310 DJI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual E310 - DJI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E310 by DJI.
