VT-3410 W - Blender Vitek - Free user manual and instructions

Product Type	Blender
Brand	Vitek
Model	VT-3410 W
Dimensions (H x W x D)	Approx. 400 x 200 x 200 mm
Weight	1.5 kg
Power Supply	220-240 V, 50/60 Hz, 600 W
Jar Capacity	1.5 L (maximum)
Material	Plastic body, glass jar
Speed Settings	2 speeds + pulse
Main Functions	Blending, pureeing, crushing ice, mixing
Safety Features	Overload protection, non-slip feet, locking lid
Care and Cleaning	Detachable parts dishwasher safe; wipe motor base with damp cloth
Spare Parts	Replacement jar, lid, and blade assembly available
Repairability	Serviceable by qualified technician; spare parts sold separately
Warranty	1 year limited warranty
General Information	Designed for household use; not for commercial purposes

Frequently Asked Questions - VT-3410 W Vitek

What is the capacity of the blender jar?

The blender jar has a maximum capacity of 1.5 liters.

Can I blend hot liquids?

No, do not blend hot liquids as they can cause pressure buildup and splashing. Allow liquids to cool to room temperature before blending.

How do I clean the blender?

Detachable parts such as the jar, lid, and blade assembly are dishwasher safe. For the motor base, wipe with a damp cloth and dry thoroughly. Do not immerse the base in water.

What safety features does the blender have?

The blender includes overload protection to prevent motor damage, non-slip feet for stability, and a locking lid that prevents operation if not properly closed.

Can I crush ice with this blender?

Yes, the blender can crush ice. Use the pulse function to achieve the desired consistency.

What should I do if the blender stops working?

Check if the overload protection has tripped. Unplug the blender, let it cool for 15-20 minutes, then try again. If it still doesn't work, contact Vitek customer service.

Are spare parts available for this model?

Yes, spare parts such as the jar, lid, and blade assembly are available. Contact Vitek or authorized dealers for replacement parts.

Can I use the blender for dry grinding?

This blender is designed for wet blending. For dry grinding, it is recommended to use a dedicated grinder attachment. Avoid grinding hard dry ingredients as they may damage the blades.

How do I assemble the blender correctly?

Place the jar onto the base and turn clockwise until it clicks. Attach the blade assembly to the jar, add ingredients, then secure the lid firmly. Ensure the lid is locked before using the pulse or start buttons.

What is the power consumption of this blender?

The blender operates at 600 watts and requires a 220-240 V power supply.

USER MANUAL VT-3410 W Vitek

1. Detachable blender attachment

2. Motor unit

3. Minimal speed button «I»
4. Maximal speed button "II"
5. Power cord
6. Whisk gear
7. Whisk for beating/mixing of liquid products
8. Measuring cup

Press attachment

1. Press attachment gear
2. Flask
3. Axis
4. Plunger
5. Clamp
6. Cookie cutter
7. Pastry attachment holder
8. Nut
9. Pastry attachment

Attention!

For additional protection it is reasonable to install a residual current device (RCD) with nominal operation current not exceeding 30 mA. To install an RCD, contact a specialist.

SAFETY MEASURES

Read this instruction manual carefully before using the unit and keep it for the whole operation period.

Use the unit according to its intended purpose only, as it is stated in this user manual. Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.

• Before connecting the unit to the mains, make sure that the voltage specified on the unit corresponds to your home mains voltage.
• Place the unit on a flat moisture-resistant surface away from sources of heat and open flame.
• Provide that the power cord does not contact with hot surfaces and sharp furniture edges.

- Do not use the unit outdoors.

• Always unplug the unit when you are not using it.

- In case the knives stop rotating suddenly, unplug the unit first and only after that remove the ingredients that hinder knives' rotation.

- The blender set allows quick and effective operation. However, the continuous operation time while working with the blender attachment and the whisk should not exceed 1 minute, and with the press attachment no more than 5 minutes. Make at least a 3-5 minute break between operation cycles.

• Maximum temperature of the processed products should not exceed 40^ C. Do not switch the unit on without food.

• When disconnecting the power plug from the mains, do not pull the cord, but hold the plug with your hand.
• Do not touch the motor unit body and power plug with wet hands.
• Do not use the unit near the kitchen sink, do not expose the unit to moisture.

• To avoid electric shock, do not immerse the power cord, the power plug or the motor unit body into water or any other liquids.
  • If the unit was dropped into water:

• do not touch the water;

• unplug the unit immediately, only after that you may take the unit out of water;
  – apply to the authorized service center for testing or repairing the unit.

- Do not allow children to touch the motor unit body and the power cord during unit operation.

- Do not leave children unattended not to let them use the unit as a toy.

- This unit is not intended for usage by children under 8 years of age.

- During the operation and the breaks between operation cycles the unit should be placed out of reach of children under 8 years of age.

- Children aged 8 and over as well as disabled persons can use the unit only under supervision of a person who is responsible for their safety, if they are given all the necessary and understandable instructions concerning the safe usage of the unit and information about danger that can be caused by its improper usage.

- For children safety reasons do not leave polyethylene bags, used as a packaging, unattended.

- Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

- Check the power cord and plug periodically. Do not use the unit if the motor unit body, the power plug or the power cord have damages.

- Do not disassemble and repair the unit by yourself. If you find any damages, unplug the unit and apply to an authorized service center.

To avoid damages, transport the unit in original package only.

- Keep the unit out of reach of children and disabled persons.

After unit transportation or storage at low temperature, it is necessary to keep it for at least two hours at room temperature before switching on.

ENGLISH

• Unpack the unit completely and remove any stickers that can prevent unit operation.
• Check the unit for damages; do not use it in case of damages.
• Before switching the unit on, make sure that your home mains voltage corresponds to the unit operating voltage.
• Before using the unit, wash all removable parts in warm water with a neutral detergent: the blender attachment (1), the whisk (7), the measuring cup (8) and the press attachment (10-17).
• Wipe the motor unit (2), whisk gear (6) and press attachment gear (9) with a soft slightly damp cloth, then wipe it dry.

Attention!

Do not immerse the motor unit (2), the gears (6, 9), the power cord and the power plug into water or any other liquids.

Do not put the attachments and bowls in a dishwashing machine.

Continuous operation time

The continuous operation time while working with the blender attachment and the whisk should not exceed 1 minute, and the break between operations should be no less than 2 minutes. The continuous operation time while using the press attachment is no longer than 5 minutes; make at least a 5-minute break between operation cycles.

USING THE BLENDER ATTACHMENT

WARNING: Before installing the attachment, make sure that the power plug is not inserted into the mains socket.

• Attach the blender attachment (1) to the motor unit (2), matching the mark ▼ with the mark 📞 on the attachment and turn it clockwise till bumping. The mark ▼ should match the mark 🔍 in the fixed position.
• Insert the power plug into the mains socket.
• Immerse the blender attachment (1) into the bowl with products that you want to chop or mix. You can use the measuring cup (8) as a bowl.
• To switch the unit on, press and hold the button (3) «I». Use this mode for mixing liquid products.
• If you press and hold the button (4) «|», the unit will operate at maximum rotation speed. Use this mode for combined processing of liquid and hard products.

Notes:

Products should be put into the bowl before the unit is switched on. The amount of processed products should not exceed 2/3 of the capacity of the bowl in which they are processed.

Before starting to chop/mix, we recommend to peel fruit, remove inedible parts, such as stones, and cut fruit into cubes approximately 2x2 cm in size.

- After you finish using the unit, unplug it and remove the blender attachment (1) by turning it

counterclockwise so that the mark ▼ is opposite the mark □.

Attention!

Do not remove the blender-attachment (1) during operation.

To avoid damaging the blades, do not process too hard products such as cereals, rice, spices, coffee beans, cheese, frozen food, and ice.

If the products are difficult to process, add some water.

USING THE WHISK

Use the whisk attachment (7) only for beating cream, making biscuit dough or mixing ready desserts.

WARNING: Before assembling make sure that the power plug is not inserted into the mains socket.

• Insert the whisk (7) into the gear (6).
• Install the gear (6) with the whisk (7) on the motor unit (2) so that the mark ▼ is opposite the mark □. Turn the gear (6) clockwise till bumping. The mark ▼ should match the mark ⚙ in fixed position.
• Insert the power plug into the mains socket.
• Sink the whisk (7) into the bowl with products.
• To switch the unit on, press and hold the button (3) «I». Use this operation mode for mixing liquid products.
• If you press and hold the button (4) «Il», the unit will operate at maximum rotation speed.
• After you finish using the unit, take the power plug out of the mains socket and disconnect the whisk (7) from the gear (6). Remove the gear (6) from the motor unit (2) turning it so that the mark ▼ is opposite the mark □.

Attention!

• Do not use the whisk (7) to knead stiff dough.
- Products should be put into the bowl before the unit is switched on.

USING THE PRESS ATTACHMENT

Use the press attachment with cookie cutters and use the pastry attachments for making dough or confectionary cream decorations.

WARNING: Before assembling make sure that the power plug is not inserted into the mains socket.

Installing the pastry attachment

• Insert the pastry attachment (17) into the nut (16).
• Insert the holder (15) in the nut (16) opening and rotate the holder (15) clockwise until it is fixed.
• Install the holder (15) inside the clamp (13).

Installing the cookie cutter

- Install the cutter (14) inside the clamp (13).

Further assembling instructions

- Install the flask (10) into the clamp (13) with unmarked side. Then turn the clamp in the direction of the mark.

ENGLISH

• Set the gear (9) on the motor unit (2). To do this match the marks ▼ and □, then turn the gear clockwise so that the marks ▼ and □ are opposite to each other.
• Install the plunger (12) on the axis (11).
• Insert the axis (11) end with the plunger (12) into the gear (9) opening and press till clicking.
• Pour the dough/confectionery cream into the flask (10). The product level in the flask should not exceed the «MAX» mark. If you filled the flask (10) till the maximal mark, make sure that the plunger (12) is installed as close to the end of the axis (11) as possible.
• Immerse the axis (11) end without the plunger into the flask (10) with the product; make sure that the ledges on the flask match the grooves on the plunger (12).
• The mark □ on the flask (10) should be opposite the mark ▼ on the gear (9). Turn the flask clockwise so that the marks ▼ and □ match.
• Insert the power plug into the mains socket.
• Select the rotation speed with the button (3) «I» or (4) «II».

Note: If the flask is empty and the plunger is close to the cookie cutter or the pastry attachment, the axis motion is blocked; the motor overload protection system is switched on and the gear is clicking. It is normal. Switch the unit off, unplug it, set the plunger to the starting position and add a new portion of dough/confectionery cream into the press attachment.

Basic dough recipe

200 g flour

130 g butter

100 g powdered sugar

1 egg

• Cut the butter into small cubes, put it in the bowl and leave at room temperature till melting.
• Add powdered sugar and whip carefully with the whisk.
• Whip the egg with a fork in a separate bowl.
• Gradually add the egg to the butter mixture, continue whipping the mixture with the whisk.
• Sift out flour; add it to the butter mixture. Stir the dough thoroughly with a spatula.
• Grease the cooking sheet with butter.
• To form a cookie properly put the press attachment to the cooking sheet. Press and hold the button (3) «I» for 3-4 seconds.
• Bake cookies at 190^ during 10-12 minutes.

Cleaning

– Unplug the unit before cleaning.
- Remove the attachments.

• Use a slightly damp cloth to clean the motor unit (2) and the gears (6, 9), then wipe them dry.
• After processing of salty or sour products it is necessary to rinse the blender attachment (1) with water immediately.
• While possessing products with strong dyeing properties (for instance, carrot or beet-root), the attachments or the bowls can get colored; wipe them with a cloth dampened in vegetable oil.
• Wash all removable parts in warm soapy water, rinse and dry them.

DO NOT IMMERSE THE MOTOR UNIT (2) AND THE GEARS (6, 9) INTO ANY LIQUIDS, DO NOT WASH THEM UNDER WATER JET OR IN A DISHWASHING MACHINE.

Storage

• Clean and dry the unit thoroughly before taking it away for storage.
• Do not wind the power cord around the motor unit.
• Keep the blender set away from children in a dry cool place.

Delivery set

Motor unit - 1 pc.

Blender attachment - 1 pc.

Whisk gear - 1 pc.

Whisk - 1 pc.

Measuring cup - 1 pc.

Press attachment (without cutter and pastry attachment) - 1 pc.

Cookie cutters - 12 pcs.

Pastry attachment holder - 1 pc.

Nut - 1 pc.

Pastry attachments - 6 pcs.

Instruction manual - 1 pc.

Technical specifications

Power supply: 220-240 V \~ 50 Hz

Maximal power consumption: 700 W

The manufacturer preserves the right to change the specifications of the unit without a preliminary notification.

Unit operating life is 3 years

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 2004/108/EC and to the Low Voltage Regulation (2006/95/EC)

русский

БЛЕНДЕРНЫЙ НАБОР

Описание

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxxx means that the item was manufactured in June (the sixth month) 2006.

RUS