VT-TTAR1620 - Digital Video Recorder Vitek - Free user manual and instructions
Find the device manual for free VT-TTAR1620 Vitek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Digital Video Recorder (DVR) |
| Brand | Vitek |
| Model | VT-TTAR1620 |
| Video channels | 16 BNC inputs |
| Video input | NTSC/PAL auto-detect |
| Video output | 1 x HDMI (up to 4K), 1 x VGA, 1 x CVBS |
| Audio | 1 x RCA input, 1 x RCA output |
| Compression | H.264/H.265 |
| Recording resolution | Up to 1080p per channel |
| Recording speed | Up to 30 fps per channel |
| Storage | 2 x SATA II ports (up to 8TB each) |
| Network | 1 x RJ-45 10/100/1000 Mbps |
| USB | 2 x USB 2.0 ports |
| PTZ control | Pelco-D/P, RS-485 supported |
| Mobile app | Vitek Mobile for iOS/Android (P2P) |
| Operating system | Embedded Linux |
| Power supply | DC 12V, 5A (AC adapter included) |
| Power consumption | ≤18W without HDD |
| Dimensions | 440 x 340 x 50 mm |
| Weight | 2.8 kg |
| Operating temperature | -10°C to +55°C |
| Cleaning | Wipe with soft dry cloth; avoid liquids |
| Security | Password protection, IP blocking, tamper alarm |
| Spare parts | Replacement adapter, remote control, HDD rails |
Frequently Asked Questions - VT-TTAR1620 Vitek
How do I connect the DVR to my monitor?
Connect the DVR to your monitor using the HDMI or VGA output. Then power on the unit and follow the setup wizard to select video format and recording mode.
Can I use IP cameras with this DVR?
No, the VT-TTAR1620 is an analog DVR designed for traditional CCTV cameras with BNC connectors. To use IP cameras, you would need an NVR instead.
What is the maximum hard drive capacity?
It supports two SATA II hard drives, each up to 8TB, giving a total of 16TB. We recommend using surveillance-grade drives.
How do I configure motion detection?
Go to Menu > Camera > Motion. Enable motion detection, draw the detection area, and set the sensitivity. Then link it to recording or alarm outputs.
How do I access the DVR remotely?
Download the Vitek Mobile app and add the DVR via its P2P QR code in the menu. You can also use Internet Explorer or a dedicated CMS tool on your PC.
What should I do if the DVR doesn't detect the hard drive?
Check the SATA cable and power connector. Make sure the drive is formatted under Menu > Storage > HDD. If the drive is new, initialize it in the system.
How do I backup recorded video?
Plug a USB flash drive into the USB port. Go to Menu > Playback, select the time and channel, then click Backup to export the clip in AVI format.
Can I reset the admin password if I forget it?
Contact Vitek technical support and provide the security code shown in the login window. They will supply a reset code based on your device serial number.
Does the DVR support PTZ control?
Yes, it supports Pelco-D and Pelco-P protocols via the RS-485 port. You can control PTZ cameras from the DVR interface or the app.
How often does the DVR need maintenance?
For optimal performance, clean the ventilation fans every 6 months and check that the hard drive's health status is normal using S.M.A.R.T. monitoring in the menu.
User questions about VT-TTAR1620 Vitek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Digital Video Recorder in PDF format for free! Find your manual VT-TTAR1620 - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-TTAR1620 by Vitek.
USER MANUAL VT-TTAR1620 Vitek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vitek
Model : VT-TTAR1620
Category : Digital Video Recorder