HR EVO 14 - Heating Nordic Fire - Free user manual and instructions
Find the device manual for free HR EVO 14 Nordic Fire in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Producttype | Pellet stove |
| Merk | Nordic Fire |
| Model | HR EVO 14 |
| Vermogen (warmteafgifte) | 14 kW |
| Verwarmd volume | Up to 350 m³ |
| Brandstoftype | Wood pellets (6 mm) |
| Pellettankinhoud | 20 kg |
| Rendement | > 90% |
| Afmetingen (B x H x D) | 50 x 100 x 50 cm |
| Gewicht | 80 kg |
| Rookgasafvoer | 80 mm diameter |
| Elektrische aansluiting | 230V / 50Hz |
| Opgenomen elektrisch vermogen | 200 W |
| Geluidsniveau | < 30 dB |
| Timer | Yes, programmable |
| Thermostaat | Yes, built-in |
| Bediening | LCD screen + remote control |
| Veiligheidsvoorzieningen | Overheating protection, child lock |
| Reiniging | Ash drawer, glass cleaning system |
| Onderhoud | Annual check by professional |
| Garantie | 2 years |
| CE-certificering | Yes |
| Kleur | Black / Stainless steel |
Frequently Asked Questions - HR EVO 14 Nordic Fire
How do I install the Nordic Fire HR EVO 14 pellet stove?
Installation must be carried out by a certified installer. Ensure a suitable chimney connection (80 mm) and adequate ventilation in the room. Consult the installation manual for all safety requirements.
How often should I empty the ash drawer?
The ash drawer should be emptied depending on usage, on average every 2-3 days under normal use (10-14 hours per day). A full ash drawer can reduce draft.
What type of pellets can I use?
Use only dry wood pellets of 6 mm diameter with an ash content lower than 1%. Low-quality pellets can cause blockages and reduced efficiency.
The stove does not start, what can I do?
Check if the plug is in the socket, if the pellet burner contains sufficient pellets, if the ash drawer is correctly placed, and if the safety switch is not activated. Consult the error codes in the manual.
How do I clean the door glass?
Use a special stove glass cleaner or a mixture of vinegar and water. Allow the stove to cool down before cleaning the glass. Do not use abrasive agents.
How do I set the timer?
Press the timer button on the control panel or remote control. Set the desired start and stop times using the +/- buttons. Confirm with OK. See the manual for detailed instructions.
What does error code E03 mean?
Error code E03 indicates a problem with the draft in the chimney. Check if the chimney is not blocked and if the flue pipe is correctly connected. Contact an installer if the problem persists.
Can I use the stove with a programmable thermostat?
Yes, the HR EVO 14 has a built-in thermostat and also supports external programmable thermostats. Connect it to the designated connection (consult the manual).
Does the stove have a child lock?
Yes, the HR EVO 14 is equipped with a child lock. Activate it by pressing the button combination as described in the manual (usually hold the OK button for 3 seconds).
Where can I buy spare parts?
Spare parts such as the pellet burner, fan or electronics are available from authorized Nordic Fire dealers or via customer service. Use only original parts for safety and warranty.
User questions about HR EVO 14 Nordic Fire
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual HR EVO 14 - Nordic Fire and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HR EVO 14 by Nordic Fire.