Nordic Fire

HR200 - Heating Nordic Fire - Free user manual and instructions

Find the device manual for free HR200 Nordic Fire in PDF.

📄 60 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Nordic Fire HR200 - page 53
View the manual : English EN Italiano IT Nederlands NL
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Electric Heater
Brand Nordic Fire
Model HR200
Dimensions (H x W x D) 600 x 450 x 250 mm
Weight 8.5 kg
Power Source 230V / 50Hz
Power Consumption 2000 W
Heat Output 2000 W (approx. 6820 BTU)
Heating Element Ceramic / PTC
Thermostat Adjustable, 5°C – 35°C
Modes Fan only, Low heat, High heat
Timer 1 – 12 hours
Remote Control Yes, included
Safety Features Overheat protection, Tip-over switch, Cool-touch housing
Noise Level ≤ 45 dB
Maintenance Clean air filter monthly with vacuum
Replaceable Parts Fuse, power cord, heating element
Warranty 2 years
Certifications CE, RoHS

Frequently Asked Questions - HR200 Nordic Fire

How do I install the HR200 heater?
Place the heater on a flat, stable surface at least 1 meter away from flammable materials. Plug into a grounded outlet. Do not use an extension cord.
Can I use the heater in a bathroom?
The HR200 is not rated for bathroom use. Keep it away from water and high humidity areas to avoid electric shock.
How do I clean the heater?
Unplug the heater and let it cool. Clean the exterior with a dry cloth. Remove and clean the air filter with a vacuum or mild soapy water, then dry completely before reinserting.
Why does the heater turn off unexpectedly?
This may be due to overheat protection. Ensure the air intake and outlet are not blocked. Also check if the tip-over switch is activated. If problem persists, contact support.
Can I leave the heater on overnight?
The HR200 has a timer function that allows you to set up to 12 hours. It is not recommended to leave it unattended, but the safety features make it safe for overnight use if placed properly.
How do I adjust the thermostat?
Turn the thermostat dial to your desired temperature. The heater will automatically maintain that temperature by cycling on and off.
Does the heater produce a lot of noise?
The fan noise is minimal, around 45 dB, comparable to a quiet conversation. You can use the 'Fan only' mode if you just want air circulation.
What is the recommended room size for the HR200?
The HR200 is suitable for rooms up to 20-25 square meters (approximately 215-270 square feet) with average insulation.
How do I replace the fuse?
Unplug the heater. Locate the fuse holder on the power plug, pry it open, and replace the blown fuse with a 13A, 250V fuse of the same type. Snap the holder back in place.
Is there a warranty and how do I claim it?
Yes, the HR200 comes with a 2-year warranty. To claim, contact Nordic Fire customer support with your proof of purchase. Do not attempt to repair the unit yourself as it may void the warranty.

User questions about HR200 Nordic Fire

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual HR200 - Nordic Fire and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HR200 by Nordic Fire.

USER MANUAL HR200 Nordic Fire

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Nordic Fire

Model : HR200

Category : Heating