SeekTech Inductive Clamp - Uncategorized RIDGID - Free user manual and instructions
Find the device manual for free SeekTech Inductive Clamp RIDGID in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inductive Clamp |
| Brand | Ridgid |
| Model | SeekTech Inductive Clamp |
| Dimensions (Approx.) | 200 mm x 100 mm x 50 mm |
| Weight | 0.5 kg |
| Power Source | Passive (no battery required) |
| Primary Function | Inductive coupling to apply signal to metallic pipes or cables |
| Compatibility | Ridgid SeekTech locators (SR-20, SR-24, etc.) |
| Clamp Opening | Up to 50 mm diameter |
| Frequency Range | Compatible with locator frequencies (e.g., 33 kHz, 131 kHz) |
| Connection Cable Length | 1.5 m |
| Operating Environment | Outdoor, dry or wet conditions |
| Storage Temperature | -20°C to 60°C |
| Operating Temperature | 0°C to 50°C |
| Material | High-impact plastic, metal hinge |
| Maintenance | Clean with damp cloth; avoid solvents |
| Safety | Follow locator manual; do not use on live electrical conductors |
| Spare Parts | Not available separately |
| Warranty | 1 year (check local regulations) |
Frequently Asked Questions - SeekTech Inductive Clamp RIDGID
What is the Ridgid SeekTech Inductive Clamp used for?
It is used to inductively couple a signal onto metallic pipes or cables for tracing with a SeekTech locator.
Does the clamp require batteries?
No, the clamp is passive; it receives the signal from the locator and transfers it inductively.
What size pipe or cable can the clamp fit?
The clamp opening accommodates diameters up to 50 mm (approximately 2 inches).
Is the clamp compatible with all Ridgid SeekTech locators?
Yes, it works with most SeekTech models (SR-20, SR-24, SR-60) that have an inductive clamp output.
How do I connect the clamp to the locator?
Plug the clamp's cable connector into the locator's accessory port. Ensure the clamp is closed around the target pipe/cable.
Can I use the clamp on live electrical wires?
No. Only use on de-energized conductors to avoid electric shock or damage.
How do I clean and maintain the clamp?
Wipe with a damp cloth and mild soap. Do not use harsh chemicals or immerse in water.
What frequencies does the clamp support?
It supports typical locator frequencies such as 33 kHz and 131 kHz.
Is the clamp waterproof?
It is weather-resistant but not designed for submersion. Avoid prolonged exposure to heavy rain.
What is the cable length on the clamp?
The connection cable is 1.5 meters (approx. 5 feet) long.
User questions about SeekTech Inductive Clamp RIDGID
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SeekTech Inductive Clamp - RIDGID and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SeekTech Inductive Clamp by RIDGID.
