GD24JS - Saw GREENWORKS - Free user manual and instructions

Name: GD24JS
Brand: GREENWORKS
Rating: 9 (118 reviews)

Find the device manual for free GD24JS GREENWORKS in PDF.

📄 136 pages

EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs

View the manual :

Pick your language and provide your email: we'll send you a specifically translated version.

This manual is not available in your language

Desired language Your email address

Product Type	Cordless jigsaw
Brand	Greenworks
Model	GD24JS
Rated voltage	24 V
Power source	Lithium-ion battery (not included)
Stroke length	20 mm
Maximum no-load stroke rate	3200 min⁻¹
Maximum cutting angle	45°
Maximum cutting depth in wood	80 mm
Maximum cutting depth in steel	10 mm
Weight without battery	2.3 kg
Dimensions (L x W x H)	250 x 80 x 200 mm
Variable speed	Yes, with adjustment dial
Dust blower	Yes, adjustable
LED light	Yes, integrated
Blade change system	Tool-less quick change
Compatible blade type	T-shank blades
Safety device	Lock-off switch and trigger lock
Maintenance	Clean ventilation slots regularly, lubricate guides
Available spare parts	Blades, batteries, charger, base plate
Warranty	2 years

Frequently Asked Questions - GD24JS GREENWORKS

How to change the blade on the GD24JS jigsaw?

Unlock the quick-change lever, insert the T-shank blade with teeth facing forward, then release the lever to lock. Ensure the blade is securely fastened before use.

What type of battery does the GD24JS use?

It uses a Greenworks 24 V lithium-ion battery (not included). Compatible models include G24B2, G24B4, etc.

How to adjust the cutting speed?

Turn the speed adjustment dial on the handle. Positions 1 to 6 allow you to adapt speed to the material: slower for metal, faster for wood.

Can I cut at 45° with this saw?

Yes, the base plate can be tilted up to 45° left or right. Loosen the locking screw under the base plate, tilt to the desired angle, and retighten.

How to activate the dust blower?

The blower activates automatically when running. You can deactivate it by pressing the button on top of the housing to avoid blowing dust toward your eyes.

What to do if the saw does not start?

Check that the battery is charged and properly inserted. Ensure the safety switch is pressed before pulling the trigger. If the problem persists, contact customer service.

How to clean the saw after use?

Disconnect the battery. Use a dry or slightly damp cloth to clean the housing. Blow dust from the ventilation slots with compressed air. Do not use solvents.

What is the maximum cutting depth in wood?

With a suitable blade, the maximum cutting depth in wood is 80 mm. For metal, it is 10 mm. These values vary depending on the blade type.

Is the saw compatible with universal blades?

Yes, it accepts standard T-shank blades. U-shank blades are not compatible. Use blades designed for cordless jigsaws.

How to store the saw when not in use?

Remove the battery. Store the saw in a dry, frost-free place. Use the carrying case if provided. Protect the blade with the blade guard.

User questions about GD24JS GREENWORKS

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

No questions yet. Be the first to ask one.

Download the instructions for your Saw in PDF format for free! Find your manual GD24JS - GREENWORKS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GD24JS by GREENWORKS.

USER MANUAL GD24JS GREENWORKS

5.1 Clean the machine....6
5.2 General manintenance....6

6 Technical data......6

7 Warranty......6

8 EC Declaration of conformity......6

1 DESCRIPTION

1.1 PURPOSE

You may use this product for cutting purposes:

• cutting all types of wood
- cutting plastic
- cutting metals

1.2 OVERVIEW

Figure 1.

1	Trigger	6	Blade
2	Tube	7	Edge Guide Knobs
3	Angle Adjustment	8	Edge Guide
	Trigger	9	Finger Guard
4	Footplate	10	Lock-off Button
5	Blade Orbit Selector Lever

1.3 PACKING LIST

1	Jig saw	6	Footplate
2	Dust tube	7	Manual (operation manual, safety instruction manual, figure sheet)
3	Edge guide
4	Wood blade
5	Steel blade

2 SAFETY

WARNING

Make sure that you do/obey all safety instructions.

Refer to Safety Manual.

3 INSTALLATION

3.1 UNPACK THE MACHINE

WARNING

Make sure that you correctly assemble the machine before use.

WARNING

·If the parts are damaged, do not use the machine.

·If you do not have all the parts, do not operate the machine.

·If the parts are damaged or missing, speak to the service center.

Open the package.
Read the documentation in the box.
Remove all the unassembled parts from the box.
Remove the machine from the box.
Discard the box and package in compliance with local regulations.

3.2 INSTALL THE BATTERY PACK

Figure 2.

WARNING

If the battery pack or charger is damaged, replace the battery pack or the charger.
Stop the machine and wait until the motor stops before you install or remove the battery pack.
Read, know, and do the instructions in the battery and charger manual.
Align the lift ribs on the battery pack with the grooves in the battery compartment.
Push the battery pack into the battery compartment until the battery pack locks into place.
When you hear a click, the battery pack is installed.

3.3 REMOVE THE BATTERY PACK

Figure 2.

Push and hold the battery release button.
Remove the battery pack from the machine.

3.4 INSTALL THE BLADE

Figure 3.

Remove battery pack.
Rotate the blade clamp lock counterclockwise. Hold the lock in the open position.
Insert saw blade between blade clamp and saw bar.
Close blade clamp lock.
Reinstall the battery pack.

3.5 REMOVE THE BLADE

Figure 3.

Remove battery pack.
Rotate the blade clamp lock counterclockwise. Hold the lock in the open position.
Remove the saw blade.

3.6 INSTALL THE EDGE GUIDE

Figure 4.

Put the edge guide through the two slots in the base of the machine.

Adjust to the necessary width and lock in place with the edge guide screw.

4 OPERATION

WARNING

Always wear eye protection.

WARNING

Do not use any attachments or accessories not recommended by the manufacturer of this product.

4.1 START THE MACHINE

Figure 5.

i NOTE

The machine can not work when the lock-off button is on the center.

Push the lock-off button to the left or right side to unlock the trigger.
Pull the trigger to turn the machine ON.

Variable speed

The machine has a variable speed switch that delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.

4.2 STOP THE MACHINE

Figure 5.

Release the switch trigger.

4.3 ORBITAL MOTION

Orbital motion provides faster, more efficient cutting.

Choose from four orbital adjustment position for fine to aggressive cutting.

	0
	Hard materials such as metals or thin sheet metals. This setting can be used with knife blades, grit edge blades, rasp work, and down cutting blades.
	1
	Soft materials where cleaner cutting or delicate scrolling work is performed.
	2
	Medium density materials such as harder woods or particle board.
	3
	Soft materials such as wood, plastics, etc. and when fast cutting is more important than a clean cut.

4.4 ADJUST THE FOOTPLATE ANGLE

Figure 6.

The footplate may be tilted to allow angle cuts up to 45° in either direction.

Switch the trigger to the right.
Adjust the angle as needed.
Switch the trigger to the original position.

For best performance, always select a specified blade for the particular application and type of material you wish to cut.

General cutting

Put the front of the saw base on the workpiece
Align cutting edge of the blade with the line on your workpiece
Start the saw and move it forward on the work surface.

Plunge cutting

Make the line of cut clearly on the workpiece.
Set the cutting blade at 0.
Put the front of the saw base on the workpiece
Use high speed to start the machine and slowly lower the blade into the workpiece until the blade cuts through the wood.

WARNING

To decrease the risk of injury, keep hands away from the blade and all moving parts. Always wear safety gloves or glasses with side shields.

5 MAINTENANCE

CAUTION

Do not let brake fluids, gasoline, petroleum-based materials touch the plastic parts. Chemicals can cause damage to the plastic, and make the plastic unserviceable.

CAUTION

Do not use strong solvents or detergents on the plastic housing or components.

WARNING

Remove the battery pack from the machine before maintenance.

5.1 CLEAN THE MACHINE

CAUTION

The machine must be dry. Humidity can cause risks of electrical shocks.

Clear the unwanted material out of the air vent with a vacuum cleaner.
Do not spray the air vent or put the air vent in solvents.
Clean the housing and the plastic components with a moist and soft cloth.

5.2 GENERAL MANINTENANCE

Before each use, examine the machine for damaged, missing, or loose parts such as screws, nuts, bolts and caps.
Clean the machine with a dry cloth. Do not use slovents.

WARNING

Do not let brake fluids, gasoline, petroleum-based materials touch the plastic parts. Chemicals can cause damage to the plastic, and make the plastic unserviceable.

CAUTION

Use only approved replacement parts.

6 TECHNICAL DATA

Voltage 24 V
Strokes per minute 0-3000 min	-1
Cutting angle 0-45°
Orbital motion 4 settings
Blade changing Tool-Free
Weight without battery 2.2 kg
Battery model G24B2/G24B4	and other BAG series
Charger model 2913907 and other CAG series
Measured sound pressure level	88.5dB(A), K_pA = 3 dB(A)
Measured sound power level	99.5dB(A), K_wA = 3 dB(A)
Vibration 4.204 m/s	² , K = 1.5 m/s ²

The recommended ambient temperature range:

Item	Temperature
Appliance storage temperature range	32°F (0°C) - 113°F (45°C)
Appliance operation temperature range	32°F (0°C) - 113°F (45°C)

Item	Temperature
Battery charging temperature range	39°F (4°C) - 104°F (40°C)
Charger operation temperature range	39°F (4°C) - 104°F (40°C)
Battery storage temperature range	32°F (0°C) - 113°F (45°C)
Battery discharging temperature range	32°F (0°C) - 113°F (45°C)

7 WARRANTY

(The full warranty terms and conditions can be found on Greenworks webpage)

The Greenworks warranty is 3 years on the product, and 2 years on batteries (consumer/private usage) from the date of purchase. This warranty covers manufacturing faults. A faulty product under warranty might be either repaired or replaced. A unit that has been misused or used in other ways then described in the owner's manual might be rejected for warranty. Normal wear, and wear parts are not considered as warranty. The original manufacturer warranty is not affected by any additional warranty offered by a dealer or retailer.

A faulty product must be returned to the point of purchase in order to claim for warranty, together with the proof of purchase (receipt).

8 EC DECLARATION OF CONFORMITY

Name and address of the manufacturer:

Name: GLOBGRO AB

Globe Group Europe

Address: Riggaregatan 53, 211 13 Malmö, Sweden

Name and address of the person authorised to compile the technical file:

Name: Peter Söderström

Address: Riggaregatan 53, 211 13 Malmö, Sweden

Herewith we declare that the product

Category: Jig saw

Model: 3601407 (JSD401)

Serial number: See product rating label

Year of Construction: See product rating label

- is in conformity with the relevant provisions of the Machinery Directive 2006/42/EC.

- is in conformity with the provisions of the following other EC-Directives:

• 2011/65/EU & (EU)2015/863
• 2014/30/EU

Furthermore, we declare that the following parts, clauses of harmonised standards have been used:

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Place, date: 1.22.20 Signature: Ted Qu, Quality Director

Ted Qu

Deutsch

DE

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Ort, Datum: 1.22.20

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

8 DÉCLARATION DE CONFORMITÉ CE

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

3.4 SETT PÅ KNIVBLADET

Figur 3.

3.6 SETT PÅ KANTSKINNEN

Figur 4.

5.2 GENERELT VEDLIKEHOLD

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Sted, dato: 1.22.20 Signatur: Ted Qu, kvalitetsdirektor

Ted Qu

Dansk

1 Beskrivelse.... 59

1.1 Formål....59
1.2 Oversigt.... 59
1.3 Liste over dele.... 59

2 Sikkerhed....59

3 Isætning....59

3.1 Pak maskinen ud....59
3.2 Sæt batteripakken i.... 59
3.3 Fjern batteripakken....59
3.4 Montering af klingen.... 59
3.5 Tag klingen af.... 59
3.6 Sæt kantstyret på....59

4 Betjening.... 59

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Sted, dato: 1.22.20

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Kraj, datum: 1.22.20 Podpis: Ted Qu, direktor za preverjanje kakovosti

Ted Qu

Hrvatski

1 Opis....84

1.1 Namjena....84
1.2 Pregled....84
1.3 Sadržaj pakiranja.... 84

2 Sigurnost.... 84

3 Ugradnja.... 84

3.1 Vađenje stroja iz ambalaže.... 84
3.2 Umetnite bateriju.... 84
3.3 Uklonite baterijski modul.... 84
3.4 Ugradnja noža....84
3.5 Demontaža lista pile 84
3.6 Postavljanje rubne vodilice....84

4 Rukovanje.... 85

4.1 Pokretanje stroja.... 85
4.2 Zaustavite rad stroja....85
4.3 Orbitalno kretanje....85
4.4 Podešavanje kuta podnožne ploče.... 85
4.5 Rukovanje strojem....85

5 Održavanje......85

5.1 Očistite stroj....86
5.2 Općenito održavanje....86

6 Tehnički podaci....86

7 Jamstvo....86

8 EZ izjava o sukladnosti......86

Hrvatski

1 OPIS

1.1 NAMJENA

Ovaj proizvod možete upotrebljavati za svrhe rezanja:

rezanje svih vrsta drveta
rezanje plastike
rezanje metala

1.2 PREGLED

Slika 1.

1	Okidač	6	Nož
2	Cijev	7	Gumbi rubne vodilice
3	Okidač za podcšavanje kuta	8	Rubna vodilica
3	Okidač za podcšavanje kuta	9	Štitnik za prste
4	Podnožna ploča	10	Gumb za deblokadu
5	Ručica za odabir putanje noža

1.3 SADRŽAJ PAKIRANJA

1 Ubodna pila
2 Cijev za prašinu
3 Rubna vodilica
4 List ubodne pile za drvo
5 List ubodne pile za čelik

6 Podnožna ploča

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Mjesto, datum 1.22.20 Potpis: Ted Qu, direktor za kvalitetu

Ted Qu

Magyar

1 Leírás......89

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Locul, data: 1.22.20 Semnătura: Ted Qu, Director Calitate

Ted Qu

Английски език

BG

1 Описание......99

IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC

62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC

62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

The image contains no legible text or symbols.

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

4.2 MAŠINAS APTURŠANA

Attēls Nr. 5.

4.5 DARBMAŠINAS LIETOŠANA

Attēls 7.

i PIEZIME

• EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8