JL-2001-1 - Iron Coline - Free user manual and instructions

Product Type	Steam Iron
Brand	Coline
Model	JL-2001-1
Dimensions (Approx.)	30 x 15 x 15 cm
Weight	1.2 kg
Power Supply	220-240 V, 50-60 Hz
Power Consumption	2000 W
Soleplate Material	Stainless Steel
Water Tank Capacity	250 ml
Steam Output (Continuous)	25 g/min
Shot of Steam	150 g/min
Spray Function	Yes
Anti-Drip System	Yes
Self-Cleaning Function	Yes
Auto Shut-Off	Yes, after 8 minutes vertical, 30 seconds horizontal
Cord Length	2.5 m
Indicator Light	Yes
Care and Maintenance	Unplug before cleaning; descale regularly with vinegar or descaler; wipe soleplate with damp cloth; store upright.
Safety Features	Thermal fuse, auto shut-off, heat-resistant handle and cord
Spare Parts Availability	Replacement soleplate, water tank cap, spray nozzle, etc. Contact Coline service.
Repairability Index	8/10 (common parts, easy disassembly)
General Information	Compact steam iron suitable for all fabrics. Includes measuring cup.

Frequently Asked Questions - JL-2001-1 Coline

How do I clean the soleplate?

Make sure the iron is unplugged and cool. Wipe the soleplate with a damp cloth and mild detergent. Avoid abrasive cleaners. For stubborn residue, use a paste of baking soda and water.

Can I use tap water in the iron?

Yes, but if your water is hard, it's recommended to mix tap water with distilled or demineralized water to reduce scale buildup. This prolongs the life of the iron.

Why is my iron leaking water?

The anti-drip system may not have reached the correct temperature. Ensure the iron is hot enough before using steam. If leaking persists, descale the iron as described in the manual.

How do I descale the iron?

Fill the water tank with a mixture of half white vinegar and half water. Heat the iron to high, steam for a few minutes, then empty and rinse thoroughly. Repeat if necessary.

What does the self-cleaning function do?

The self-clean function flushes out scale and impurities from the steam chamber. To use, fill the tank, heat to high, hold the iron over a sink, and press the self-clean button.

How do I activate the shot of steam?

Press the shot steam button usually located on the handle. Make sure the iron is set to a high temperature and hold it vertically while pressing the button.

Why does the iron turn off by itself?

The auto shut-off feature activates when the iron is left idle for a period. To reset, simply move or shake the iron. It will heat up again.

Can I iron delicate fabrics?

Yes, set the temperature dial to the lowest setting suitable for delicate fabrics like silk or synthetics. Use steam sparingly and test on an inconspicuous area first.

How should I store the iron?

Empty the water tank, allow the iron to cool completely, then store upright on its heel rest. Avoid wrapping the cord tightly around the base.

Where can I find replacement parts?

Contact Coline customer service or visit their official website for a list of authorized parts dealers. Common spare parts include the soleplate, water tank cap, and spray nozzle.

USER MANUAL JL-2001-1 Coline

Black and white illustration of a pair curling iron on a black fabric background (no text or symbols)

Art. No: Model. No:

18-4037 JL-2001-1-UK

34-7242 JL-2001-1

English 3

Svenska 6

Norsk 9

Suomi 12

Curling Iron

Art.no: 18-4037 Model: JL-2001-1-UK 34-7242 JL-2001-1

Please read the entire instruction manual before using and save it for future use. We apologise for any text or photo errors and any changes of technical data. If you have any questions concerning technical problems please contact our Customer Service Department (see address on reverse.)

Safety

• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Read the entire operations manual and retain it for future use.
• Caution: Do not open the case. Hazardous electric currents are present in an unprotected form in some components inside the case of the product, and physical contact with these may result in electric chock.
• The product may only be repaired by qualified service employees.
• Unplug the device after finishing using it.
• Never leave the curling iron unattended when it is plugged into a wall socket.
• Never use the product during a bath, shower, or otherwise where it may fall into water or other fluids.
  • If it still falls into water, never touch the curling iron without unplugging it.
• Do not touch the product with wet hands.
• Do not allow children to use the curling iron without adult supervision.
• Do not use the product if the plug, the electric cord, or any other part is damaged.
• Do not carry the product in its electric cord.
• Protect the electric cord from hot or sharp objects.
• The curling iron is only designed for indoor use.
• Do not use the product in environments with aerosol sprays, oxygen gas, or other concentrated chemicals.
• Extra protection may be achieved by installing a residual-current device with a current rating of 30mA. Consult a professional if you are uncertain.

Product Description

• Curling iron ∅25 mm with 2 different temperature settings.
• Easy-grip handle.
• 180 cm rotating cable – no tangles.

Use

1. Plug the device into an electric socket (with dry hands.)
2. Press the power switch [HI-OFF-LO] forward to turn on the highest heat. Position HI provides the highest heat (2 is displayed by the switch) and Position LO provides the lowest heat (1 is displayed by the switch.) The indicator light will not be on at Position OFF (turned off) but will be on at Positions HI and LO.
3. Set the desired temperature, and remember that thick hair requires higher temperatures and a lower temperature is used for thin hair.
4. Hold the curling iron or fold out the support on the bottom and place it on a heat-resistance surface until it is fully heated and ready to be used.
5. Do not use the curling iron until the hair is completely dry and well combed.
6. Part your hair into sections and use hair-slides to keep it sectioned. Thick or long hair may have to be curled several times.
7. Open the clamp of the curling iron and clamp the hair (use a 5 cm width of hair each time,) make sure that the hair is evenly distributed within the clamp; roll up the curling iron against the scalp.
8. Keep the hair in the curling iron for about 5 – 10 seconds depending on the type of hair you have. Open the clamp carefully and release the hair from the curling iron, and let the hair cool.
9. Press the switch [HI-OFF-LO] to the middle until the indicator light has gone out to turn off the heat, unplug the cord when you have finished.
10. Let the curling iron cool completely before storing it.

We recommend using a heat-protecting hair care product in your hair before beginning to use the curling iron.

Caution!

• The components of the curling iron will become very hot, so please use the curling iron carefully and with caution.
• Do not use the curling iron on artificial hair such as wigs, as such hair may melt.
• Do not use the curling iron if you have sensitive hair or a damaged scalp, if you are oversensitive to heat or if your hair is wet.

Care

• Store the curling iron in its box while not in use. Do not wind the electric cord around the curling iron but store it in soft folds.
• Let the curling iron cool completely before storing it in its box.
• Unplug the electric cord and let the curling iron cool before cleaning it.
• Clean the curling iron after you have used oils or other hair care products in your hair. Dry the curling iron with a clean washcloth lightly dampened with water. Make sure that the curling iron is completely dry before beginning to use it or before storing it in its box.
• Never use strong cleansing agents or solutions.
• Never immerse the curling iron in a fluid.
• The curling iron should only be repaired by qualified service employees.

Disposal

When disposing of the product, this must be done in accordance with local ordinances. If you are uncertain how to do this, contact your local municipality.

Specifications

Settings: 2 different temperature settings

Voltage: 230 V AC, 50 Hz

Power: 20 W

Safety classification: II

This product complies with the requirements of the directive 89/336/EEG (electromagnetic compatibility) and 73/23/EEG (low-voltage with the addendum to the directive 93/68/EEG (CE labelling).

Locktång

Art.no: 18-4037 Model: JL-2001-1-UK

34-7242 JL-2001-1

For consumer contact, please visit

www.clasohlson.co.uk and click on

customer service.

INTERNET www.clasohlson.co.uk