OKP6751TH - Range hood Hansa - Free user manual and instructions
Find the device manual for free OKP6751TH Hansa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Installation Type | Built-in / Wall-mounted |
| Width | 60 cm |
| Height | 12 cm |
| Depth | 50 cm |
| Weight | 10 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 200 W |
| Extraction Rate (Max) | 350 m³/h |
| Noise Level (Max) | 65 dB |
| Lighting | LED, 2 x 1 W |
| Control Type | Push buttons |
| Grease Filter | Washable metal mesh |
| Carbon Filter | Optional, for recirculation |
| Duct Diameter | 120 mm |
| Energy Efficiency Class | A |
| Timer Function | Yes |
| Remote Control | No |
| Safety Features | Automatic shut-off, thermal protection |
| Spare Parts Availability | Available via Hansa service |
| Warranty | 2 years |
Frequently Asked Questions - OKP6751TH Hansa
How to install the range hood?
Installation must be done by a qualified technician. Ensure the hood is mounted at least 65 cm above the cooking surface (for gas hobs) or 50 cm (for electric). Follow the manual for ducting or recirculation setup.
How to clean the grease filter?
Remove the metal grease filter and wash it with warm water and mild detergent, or place it in the dishwasher at low temperature. Allow to dry completely before reinstalling. Clean every 2-3 months depending on use.
How often to replace the carbon filter?
If the hood is used in recirculation mode, replace the carbon filter every 3-6 months. It cannot be washed. Overused filters reduce efficiency and increase noise.
Why is the hood noisy?
Excessive noise may be due to loose installation, a blocked filter, or an object in the fan. Check that the hood is securely mounted and the filters are clean. Also ensure the duct is not obstructed.
How to change the LED lights?
The LED lights are integrated and should only be replaced by a qualified technician. Contact Hansa service for assistance. Do not attempt to replace yourself.
Does it have a remote control?
No, this model does not include a remote control. It is operated via push buttons on the front panel.
What is the recommended duct size?
The recommended duct diameter is 120 mm. Use smooth, non-flammable pipes for best airflow. Keep the duct length as short as possible and minimize bends.
How to switch between extraction and recirculation?
The hood is factory-set for extraction mode. To switch to recirculation, you must install a carbon filter (sold separately) and seal the duct outlet. Follow the manual for conversion instructions.
Why is the hood not working?
Check if the power supply is connected and the circuit breaker is on. Ensure the filter is properly seated. If it still doesn't work, the motor or control board may be faulty. Contact Hansa service.
Where can I find spare parts?
Spare parts such as filters, lights, and motors are available from Hansa authorized service centers. Order online or visit a local dealer. Always use genuine parts.
User questions about OKP6751TH Hansa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual OKP6751TH - Hansa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OKP6751TH by Hansa.