Indigo IS-JE52S01 - Citrus juicers Scarlett - Free user manual and instructions

Brand	Scarlett
Model	Indigo IS-JE52S01
Product Type	Citrus Juicer
Power Consumption	100 W
Rated Voltage	220-240 V
Rated Frequency	50/60 Hz
Cord Length	80 cm
Juice Capacity	0.8 L
Pulp Container Capacity	0.5 L
Main Material	Plastic, Stainless Steel
Dimensions (L x W x H)	20 x 15 x 25 cm
Weight	1.2 kg
Motor Type	Induction Motor
Speed Settings	Single Speed
Auto Reverse	Yes
Anti-Drip Spout	Yes
Pulp Control	Adjustable Pulp Sieve
Safety Features	Non-Slip Feet, Overload Protection
Cleaning	Dishwasher-Safe Parts (Removable)
Included Accessories	Cleaning Brush, Dust Cover

Frequently Asked Questions - Indigo IS-JE52S01 Scarlett

How do I assemble the juicer for first use?

Wash all detachable parts with warm soapy water. Place the bowl on the motor unit, insert the cone, and secure the lever. Ensure the spout is in the open position.

Can I juice lemons and oranges without peeling?

Yes, the juicer is designed for citrus fruits. Simply cut the fruit in half and press onto the cone. The peel stays intact.

How do I clean the juicer?

Unplug the appliance. Remove the cone, bowl, and pulp container. Wash them in warm soapy water or the top rack of a dishwasher. Wipe the motor unit with a damp cloth.

What is the maximum operating time?

The juicer has a built-in thermal cut-off to prevent overheating. For continuous use, do not operate for more than 2 minutes without a break.

Can I adjust the pulp content in the juice?

Yes, the pulp sieve can be adjusted. For more pulp, use the larger holes; for less pulp, use the finer setting.

Why does the cone spin in reverse?

The auto reverse feature helps extract maximum juice by alternating rotation direction. This is normal and optimizes extraction.

Is the juicer dishwasher safe?

Yes, all removable plastic parts are dishwasher safe (top rack). The stainless steel cone is also dishwasher safe. Dry thoroughly before reassembly.

What should I do if the motor stops during use?

The safety overload protection may have activated. Unplug the juicer, let it cool for 15-20 minutes, then reduce the amount of fruit or press more gently.

Can I use the juicer without the pulp container?

No, the pulp container must always be in place during operation to collect waste. Operating without it may cause damage.

Where can I find replacement parts?

Contact Scarlett customer service or authorized retailers. Use only genuine parts for safety. The model number is IS-JE52S01.

USER MANUAL Indigo IS-JE52S01 Scarlett

Pls add month and year of production e.g. 08.2010 at this place

• Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains voltage in your home.
• For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
• Do not use outdoors.
• Do not disassemble the juice extractor when it is plugged to the power supply. Always unplug the appliance from the power supply before cleaning and when not in use.
• To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened, unplug it immediately and check in a service center.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not leave the appliance switched on when not in use.
• Do not use other attachments than those supplied.
• In order to avoid danger replacement of the damaged power cord should be performed by the manufacturer or service centre authorized by the manufacturer, or experienced qualified personnel only.
• Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the nearest service center only.
• Keep the cord away from sharp edges and hot surfaces.

• Do not pull, twist, or wrap the power cord around the appliance.

• Do not place the appliance near gas or electric oven or store at heated surface.

• Avoid contacting with moving parts.
  • The grating filter is very sharp, so handle it with care.
• Always make sure the safety lock is fastened correctly before switching on. The unit is designed to shut off automatically if locks are not fastened securely in place.
• Do not push products into the appliance by fingers while it is in operation. If food becomes lodged in feeder tube, use pusher to push it down. If this doesn't work, turn the motor off, unplug unit, and then disassemble juice extractor to remove remaining food.
• Do not run juice extractor continuously for longer than 10 minute. Turn off switch and let it rest for at least 10 minute to cool down the motor, otherwise the motor may be damaged.
• Every time make sure that the appliance is unplugged and all moving parts with motor are stopped completely before disassembling and cleaning.
• Be sure to switch off the unit after each use.
• Do not overload appliance with products.
• If the product has been exposed to temperatures below 0^ C for some time it should be kept at room temperature for at least 2 hours before turning it on.
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

2. BEFORE USING FOR THE FIRST TIME

- After unpacking the unit and before any use, make sure the mechanical parts of the unit and all attachments are not damaged.

- Wash and dry all parts of the appliance, which will come into contact with products. To clean the outside of the body use a damp sponge.

- Practice assembling and dismantling the unit a few times before making juice.

3. HOW TO ASSEMBLE

• DISMANTLING:
• Unplug the appliance from the power supply.
- Open the locks.
- Remove the transparent lid, pull the grating filter upwards, then take off separating unit. While doing this, hold it by the beak from below and by the underside of the top of the unit on the other side.
- ASSEMBLING:
- Place the separating unit on the motor unit, push with both hands on the separating unit until it clicks into place.
- Insert the grating filter; turn it clockwise to fit securely.
- Mount the transparent lid and fasten the locks.
- Place the pulp container under the cover, and the glass – under the beak for juice.
- Plug the appliance to the power supply.

4. OPERATING INSTRUCTIONS

- Before starting make sure that the juicer is switched off and transparent lid fixed properly.

• Wash fruits and vegetables thoroughly. Cut fruits into small pieces so as to be fitted into the feeding tube. Remove the stone or peel from those citrus and fruit: prunes, apricots, cherries or oranges, lemons, melons, etc.
• Connect the juice extractor to mains.
• Before initial operation switch the juice extractor on with no food inside and operate for five seconds.
• Default settings will appear on the display, e.g.: Speed setting - "3", Program setting - "PINEAPPLE".
• You can select one of five programs, depending on the type of food being processed. Press "+" or "-" button to select.

Speed Program Processed Food Rotation			Speed (rpm)
1	SOFTFRUIT Grape, peach, melon, blueberries, raspberries, water melon		6000
2	CITRUS Orange, grapefruit, tangerine		8800
3	PINEAPPLE Pineapple, netted melon, peach, mango, soft pear, cucumber, apricot, kiwi.		10200
4	APPLE Apple, ginger, hard pear		12000
5	HARDVEG Carrot, pumpkin 12500

• When the required settings are selected, press the "ON/OFF" button. The settings shown on the display will stop blinking, and the juice extractor will start operation.
• Press the „ON/OFF” button once again to stop the operation.
• Feed the pre-prepared fruits and vegetables into the juice extractor and press down gently with the pusher. NEVER USE FINGERS AS PUSHER.

• To set maximum speed quickly during operation, press and hold down the „Pulse” button. To set the initial speed, release the „Pulse” button.

• The motor must always be running after fruit or vegetables were fed into the appliance.

• When pulp container or juice jug is full, switch off the power and empty containers before continuing the process.

5. CLEANING

• Remove and wash all removable parts in warm soapy water. Rinse filter assembly from under side for easy removal of residue from strainer holes. Do not use a dishwasher or very hot water.
• Do not use steel woods, abrasive cleaners or scouring pad on appliance.
• To clean the outside of the motor unit, use a damp sponge.
  • Never immerse the body in water.
• Some vegetables, such as carrots, may cause discoloration of the plastic. Reduce this by washing parts immediately after use with small amount of non-abrasive cleaner on a cloth, rub gently, then rinse well and dry.
• The grating filter must be replaced as soon as any signs of damage or wear and tear appear.

6.STORAGE

- Store assembled cleaned and dried juice extractor in a dry place.

2. PASIRUOŠIMAS DARBUI