CO4006 - Loudspeaker Proel - Free user manual and instructions

Product Type	2-way HF column speaker
Model	CO4006
Brand	Proel
Speakers	Woofer: 6 x 2" / Tweeter: 1"
Power Taps @ 100V	40W (Red), 20W (Yellow), 10W (Green)
Frequency Response	180 Hz - 18 kHz
SPL (1W/m)	91 dB
SPL MAX (Pmax @ 1m)	107 dB
Coverage Angle (1 kHz / 4 kHz, -6 dB)	Vertical: 40° / 30°; Horizontal: 170° / 140°
Construction Materials	Aluminium body, metal grille
Color	White (RAL 9010)
Dimensions (W x H x D)	78 x 505 x 66 mm
Weight	2.2 kg
Fixing System	Bracket (included)
Transformer	Internal, for 100V line systems
Installation	Wall-mounted via joint/support; recommended height: 1.4 m (seated) or 1.7 m (standing)
Input Connection	Shared COM (Black) and color-coded wires (Red/Yellow/Green) for power selection
Access to Transformer	Unscrew base of column speaker

Frequently Asked Questions - CO4006 Proel

What is the Proel CO4006 speaker type?

The Proel CO4006 is a 2-way HF column speaker designed for acoustically demanding environments, providing high sound directivity.

What are the power taps available on the CO4006?

The speaker offers three power taps at 100V: 40W (Red wire), 20W (Yellow wire), and 10W (Green wire).

What is the frequency response of the CO4006?

The frequency response is 180 Hz to 18 kHz.

How do I select the desired power on the CO4006?

Connect the input signal line to the shared COM torque (Black cable) and the colored cable (Red/Yellow/Green) corresponding to the desired power as per the label on the internal transformer.

What is the recommended installation height for the CO4006?

For a seated audience, mount the speaker with the center at 1.4 m from the ground. For standing listeners, the recommended height is 1.7 m.

How do I access the transformer on the CO4006?

You can access the transformer by unscrewing the base of the column speaker.

What are the dimensions and weight of the CO4006?

Dimensions: 78 x 505 x 66 mm (W x H x D). Weight: 2.2 kg.

What materials is the CO4006 made of?

The body is made of aluminium and it has a metal protection grille. Color: White (RAL 9010).

How is the CO4006 mounting bracket installed?

Separate the joint parts by undoing the central screw. Secure the left part to the speaker's rear slide nuts, then fix the right part to the wall using dowels. Anchor the speaker-mounted part to the wall part with the screw, then tighten to lock.

What are the coverage angles of the CO4006?

Vertical coverage: 40° at 1 kHz / 30° at 4 kHz. Horizontal coverage: 170° at 1 kHz / 140° at 4 kHz.

USER MANUAL CO4006 Proel

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Model	CO4006
Type	Column Speaker
Speakers	W: 6 x 2”T: 1”
Power taps @ 100V	40/20/10W
Frequency response	180Hz -18KHz
SPL(1W/m)	91 dB
SPL MAX (Pmax @ 1m)	107 dB
Coverage Angle1KHz/4KHz (-6dB)	V:40°/30°H:170°/140°
Construction materials	Aluminium
Colour	White (RAL 9010)
Dimensions (W x H x D)	78 x 505 x 66 mm
Weight	2.2Kg
Fixing system	Bracket

CO4006

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

2-way HF column speaker, easy to install, fitted with an internal transformer, metal protection grille and aluminium body, which makes it a very resistant appliance from a mechanical point of view. Particularly suitable for acoustically demanding environments, where thanks to its special design it ensures high sound directivity.

The C04006 speaker is extremely simple to install in just a few minutes.

[1] To obtain the best sound effect with a seated audience, secure the speaker with the central part at 1.4 m from the ground, while in the case of standing listeners, the recommended height is 1.7 m.
[2] The output power of the speaker is set by connecting the input signal line to the shared COM torque (Black cable) and the coloured cable (Red-Yellow-Green) depending on the desired power reported on the label of the internal transformer.

Note:

Red - 40W

Yellow - 20W

Green - 10W

You can access the transformer by unscrewing the base of the column speaker.

[3] To install the column speaker correctly, position and secure the designated joint/support supplied with it to the wall as follows (refer to the figure):

a. Undo the central screw and separate the parts of the joint
b. Secure the left part to the designated nuts in the rear slide of the column speaker by using the nuts supplied
c. Use dowels to secure the right part to the wall
d. Anchor the part already secured to the column speaker to the other part of the joint by using the screw removed earlier
e. Turn the product towards the listening area and finally block the joint by tightening the screws

INSTALLATION PROCEDURE

Model	CO4006
Type	Column Speaker
Speakers	W: 6 x 2”T: 1”
Power taps @ 100V	40/20/10W
Frequency response	180Hz -18KHz
SPL(1W/m)	91 dB
SPL MAX (Pmax @ 1m)	107 dB
Coverage Angle	V:40°/30°
1KHz/4KHz (-6dB)	H:170°/140°
Construction materials	Aluminium
Colour	White (RAL 9010)
Dimensions (W x H x D)	78 x 505 x 66 mm
Weight	2.2Kg
Fixing system	Bracket