appTPV01WH - Cash register Approx - Free user manual and instructions

Product Type	Cash Register
Brand	Approx
Model	appTPV01WH
Power Supply	AC 100-240V, 50/60Hz
Display	LCD, 2 lines, 16 characters each
Printer	Thermal, 58mm paper width
Cash Drawer	Built-in, lockable, 4 coin compartments and 5 bill compartments
Keyboard	40 keys with numeric pad and function keys
Dimensions (W x D x H)	approx. 350 x 300 x 200 mm
Weight	approx. 3 kg
Functions	Tax calculation, subtotal, total, refund, report printing (X and Z), clerk keys, transaction memory
Memory Backup	CR2032 battery for memory retention
Accessories Included	Power cord, paper roll, user manual (PDF)
Maintenance	Clean exterior with dry soft cloth; use thermal paper only
Safety	Overload protection, cash drawer lock
Spare Parts	Thermal paper rolls, printer head, power adapter
Repairability	Modular design; printer head and keyboard replaceable by service technician

Frequently Asked Questions - appTPV01WH Approx

How do I load the paper roll into the printer?

Open the printer cover by pressing the latch. Place the thermal paper roll with the paper feeding from the bottom. Pull out a short length of paper and close the cover until it clicks. Then press the FEED key to advance the paper.

How do I print an X (daily) report?

Ensure the register is in REG mode. Press the #/NS key followed by SUB TOTAL, then X and AMT TEND.RPT (or similar sequence as per manual). The X report prints the current sales without resetting totals.

How do I change the memory backup battery?

Disconnect the power. Open the battery compartment (usually under the printer or on the bottom). Replace the CR2032 battery with a new one, observing polarity. Close the compartment and reconnect power. Re-enter date/time and tax rates if needed.

What should I do if the printer is not printing?

Check if paper is loaded correctly and the cover is closed. Ensure the printer head is clean (use a cleaning pen). If still not working, try a different paper roll (thermal side up). If the problem persists, the printer head may need replacement.

How do I set the date and time?

Turn the mode key to PROGRAM mode. Press the #/NS key, then 4 for date setting. Enter the date in MMDDYYYY format. Press SUB TOTAL. Then press #/NS and 5 for time, enter HHMM (24-hour format). Press SUB TOTAL. Turn mode back to REG.

How do I clear the total or reset the register?

To reset the transaction memory, perform a Z report which clears totals. Turn mode to Z and press SUB TOTAL then AMT TEND.RPT. This prints a report and resets daily totals. For a full factory reset, hold the #/NS key while powering on (refer to manual).

How do I perform a refund?

In REG mode, press the REFUND key. Enter the item amount and press the DEPARTMENT key. Then press SUB TOTAL followed by AMT TEND.RPT to complete the refund. The register will print a negative line.

What if the display is blank?

Check the power cord connection and ensure the outlet is working. If battery powered, replace batteries. If the display remains off, there may be an internal fuse blown - contact a service technician. Try pressing the RECEIPT key to wake it.

How should I clean the thermal printer head?

Turn off and unplug the register. Open the printer cover. Use a thermal printer cleaning pen or a lint-free cloth lightly moistened with isopropyl alcohol to gently wipe the print head. Let it dry completely before closing and using.

Where can I find spare parts or accessories?

Spare parts such as thermal paper rolls, printer heads, power adapters, and CR2032 batteries can be purchased from Approx authorized dealers or online marketplaces. Use only genuine parts to ensure compatibility.

USER MANUAL appTPV01WH Approx

Thank you for choosing appTPV01 Approx POS terminal. Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. The company reminds you that the proper use will improve the use affect and authentication speed. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference.

Approx will assume no liability for any technical inaccuracies or editorial or other errors or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including without limitation loss of data or profits, resulting from the furnishing, performance, or use of this material. This information is provided "as is" and Approx expressly disclaims any warranties, expressed, implied or statutory, including without limitation implied warranties of merchantability or fitness for particular purpose, good title and against infringement.

The information in this manual contains only essential hardware concerns for general user and is subject to change without notice. Approx reserves the right to alter product designs, layouts or drivers without notification. The system integrator shall provide applicative notices and arrangement for special options utilizing this product.

All data should be backed-up prior to the installation of any drive unit or storage peripheral. Approx will not be responsible for any loss of data resulting from the use, disuse or misuse of this or any other Approx's post terminal product.

Daily maintenance guide

For regular cleaning of POS touch screen, please use only soft haired brush or dry soft cloth. You may use moist soft cloth to remove stains when necessary. Apply only proper amount of mild neutral detergent for obstinate stains. Please note that never use Acryl dissolving solvent or Polycarbonate dissolving solvent. You may apply ammonia-based glass cleaner only on the screen surface.

Caution

• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to local regulations.
• Do not remove the cover, and ensure no user serviceable components are inside. Take the unit to the service center for service and repair.
• Lay this equipment on a reliable surface when install. A drop or fall could cause injury.

Specifications

Display size 15.1" L Touch Display Max. res	CD (LED back lit)
	solution 1024x768
	Touch type	Capacitive
Main Board Processor	Intel Celeron J1900 Quad Core 2.0GHz
	System memory	SO-DIMM		4GB
Storage	HDD	64GB	SSD	mSA
I/O Audio Port x	USB	x	5 (USB 2.0)
		x	1 (USB 3.0)
	COM	x	4
	HDMI	x	1
	1 line out x 1 line in
	LAN	x	1 (RJ45)	10/1C
	VGA	x	1
Environmental Relative		Operation temperature -10° to
		humidity 0% to 95% non-condensing
Power Supply 12V 5A		power adapter
OS Support Windows		7, 8.X, 10, Linux
Certifications		CE/RoHS

Operating system installation

This product is highly professionalized equipment. The installation of an OS into a machine without any preloaded OS could be a major difficulty for average user or obstacle by possibly unintentional negligence even for PC veterans to accomplish such a task. Therefore, OS installation into a system without preloaded OS is highly discouraged. Please kindly refer to our Motherboard User Guide.

Safety, maintenance and recycling instructions

1. Caution: Never open the device, the internal parts are danger, electrical shock.
2. Do not install this unit near water, for example, in a wet basement, in an unprotected outdoor installation or in any area classified as a wet.
3. Do not insert objects of any kind into this unit through openings as they may touch voltage points and short out parts that could result in fire or electric shock.
4. Do not spill any liquid on the unit. Danger of explosion!
5. Do not crush power cables, danger of short circuit!
6. Always connect to the manufacturer's recommended tension.
7. Clean the product with a soft and dry cloth.
8. Follow local regulations for disposing of the product.

Recycled

AEE REI-RAEE 5548 In this manual, the container (bin) symbol indicates that the product is subject to the European directive 2002/96 / EC, electrical and electronic products, batteries, and batteries and other accessories must necessarily be subject to a selective collection.

At the end of the life of the device, make use of the recycling bins. This gesture Will help reduce the

health risks and preserve the environment.

Municipalities and distributors, Will provide essential details on recycling your old device. If this device carries an internal battery, it must be removed and deposited separately for proper management.