SB4 V2 - Uncategorized PURE - Free user manual and instructions
Find the device manual for free SB4 V2 PURE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Radio & Speaker |
| Model | SB4 V2 |
| Brand | Pure |
| Dimensions (W x H x D) | approx. 250 x 150 x 80 mm |
| Weight | approx. 0.8 kg |
| Power Supply | AC 100-240V, 50/60Hz or 6 x AA batteries (not included) |
| Radio Bands | DAB/DAB+, FM |
| Bluetooth | Yes, for audio streaming |
| Alarm Functions | Dual alarm with sleep timer |
| Display | LCD screen with adjustable brightness |
| Presets | 30 presets (15 DAB, 15 FM) |
| Audio Output | 3.5mm headphone jack |
| Speaker Power | 2 x 3W RMS |
| Frequency Range | DAB: Band III, FM: 87.5-108 MHz |
| Material | Plastic casing with fabric grille |
| Cleaning | Wipe with a soft, dry cloth |
| Safety | Do not expose to water or extreme temperatures |
| Accessories Included | AC adapter, user manual |
| Warranty | 2 years |
Frequently Asked Questions - SB4 V2 PURE
How do I set the alarm on my Pure SB4 V2?
Press and hold the Alarm button until the display flashes. Use the Tune knob to set the hour and minute, then press Select. Choose the alarm source (buzzer, DAB, or FM) and set the frequency (once, daily, etc.). Press Select to confirm.
Can I connect my phone via Bluetooth?
Yes. Press the Menu button, select Bluetooth, then Pairing. On your phone, search for Pure SB4 V2 and select it. Once paired, you can stream audio.
Why is my radio not picking up DAB stations?
Ensure the antenna is fully extended. Perform a full scan by pressing Menu then selecting Full Scan. If still no stations, try moving the radio near a window or away from interference.
How do I replace the backup battery?
The SB4 V2 uses a CR2032 coin cell battery for clock backup. Open the battery compartment on the underside, remove the old battery, and insert a new one with the + side facing up.
Can I use the radio while on battery power?
Yes. Insert 6x AA batteries (not included) into the compartment. The radio will automatically switch to battery if AC power is disconnected.
How do I reset the radio to factory settings?
Press and hold the Menu button for about 5 seconds until 'Factory Reset' appears. Press Select to confirm. All presets and settings will be erased.
What should I do if the screen is dim?
Go to Menu > Display > Brightness and adjust to a higher level. Also check if the radio is in nighttime dimming mode.
Does the SB4 V2 support DAB+?
Yes, it supports DAB and DAB+ digital radio bands, as well as FM with RDS.
How do I update the firmware?
The SB4 V2 does not support over-the-air firmware updates. If an update is necessary, it would require connection to a computer via USB (not typical for this model). Contact Pure customer support for assistance.
Can I connect external speakers?
Yes, you can connect external speakers or headphones via the 3.5mm headphone jack on the rear panel.
User questions about SB4 V2 PURE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SB4 V2 - PURE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SB4 V2 by PURE.