LM 3001 - Blender MOULINEX - Free user manual and instructions
Find the device manual for free LM 3001 MOULINEX in PDF.
Download the instructions for your Blender in PDF format for free! Find your manual LM 3001 - MOULINEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LM 3001 by MOULINEX.
USER MANUAL LM 3001 MOULINEX
BESCHRIJVING VAN HET APPARAAT
DESCRIPTION OF THE APPLIANCE
Motor unit Speed selector Blender unit: - c1 Blade unit - c2 Gasket - c3 Graduated blender jug - c4 Lid - c5 Measuring cup
Herb chopper (*accessory depending on model) (*accessory depending on model) - e1 Gasket - e2 Spice blade unit Herb chopper and Spice grinder bowl The accessories contained in the model you have bought are represented on the label on the top of the packaging. SAFETY INSTRUCTIONS
- Read the instructions for use carefully before using your appliance for the first time: the manufacturer shall accept no liability in the event of any use that does not comply with the instructions.
- This appliance is not designed to be used by persons (including children) with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety. Children should not be allowed to play with the appliance.
- It is designed to work with alternating current only. Please check that the supply voltage indicated on the name plate of the appliance corresponds to your electrical installation.
- This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
- Be sure to unplug the appliance if you must leave it unattended, before inserting or removing accessories or before cleaning it. Never pull on the power cord to unplug the appliance.
- Do not use your appliance if it does not operate correctly, if it has been damaged or if the power cord or plug is damaged. To maintain safety, these parts must be replaced by an approved service centre (see list in the service booklet).
- Any maintenance other than routine cleaning and upkeep by customers must be carried out by an approved service centre.
- Do not immerse the appliance, cord or plug in liquid. The power cord must be kept out of the reach of children and must not be placed near or come into contact with the hot parts of the appliance, sources of heat or sharp corners.
- For your safety, only use accessories and spare parts that correspond to your appliance, sold by an approved service centre.
- The blades are very sharp: handle them with caution to avoid injury.
- Never use the blender or its accessories without ingredients and never pour boiling liquids into the jug.
- Always use the blender jug with its lid (c4).
- Always pour the liquid ingredients into the jug first, before adding the solid ingredients, without exceeding the maximum level.
- Never place your fingers or any other object in the blender when the appliance is running.
- Do not use the bowls as containers for freezing, cooking or sterilisation.
- Do not use the blender for more than 3 minutes continuously.
- Place the blender on a flat, stable, heat-resistant, clean and dry worktop.
- Do not let long hair, scarves, ties, etc. hang over the blender jug or accessories when in operation.
- Do not use the blender outside in the open air.
- Do not remove the lid (c4) before the blades have stopped completely.
- Never use this appliance for blending or mixing items other than food ingredients. SAFETY LOCKING correctly positioned and locked on the motor unit (A). The appliance can run only when the jug (C) or accessories (D or E) are
USING FOR THE FIRST TIME
- Before using your appliance for the first time, clean all the accessories (C, D, E, F) in warm soapy water, except for the motor unit (A). CAUTION: The blades are extremely sharp; handle them with caution when using or cleaning the appliance.
- Make sure all the packaging has been removed before operating the appliance.
- Important note: Turn the speed selector (B) to “0” before placing the blender jug or accessories on the motor unit.
- The appliance starts only if the jug or accessory is correctly positioned and locked on its body.
- Do not operate the blender if the lid is not in place.
USING YOUR APPLIANCE
- Place the assembly (c1+c2) on the base of the jug (c3). Lock it by rotating the blade unit through a quarter turn in the anticlockwise direction. (Fig. 2).
- Introduce the ingredients into the assembled jug without exceeding
- Moisten the gasket (c2) and position it correctly on the blade unit (c1): the 3 folds of the gasket must be visible once it is in place. If it is positioned in the other direction, you will not be able to lock the blade unit on the jug. (Fig. 1).
the maximum level indicated:
- 1.25L for thick mixtures
- 1L for liquid preparations.
- Lock the lid (c4) on the jug. Place the measuring cup (c5) in its recess on the lid.
- Place the blender jug assembly (C) on the motor unit (A). The red lock (open is aligned in the slot on the motor unit. (Fig. 3 - position 1)
- Then rotate the blender jug (C) through a quarter turn until the green lock (closed) appears. (Fig. 3 position 2). 2 jug positions are possible: handle on the right or left of the motor unit.
- With the herb chopper (D) you can chop ingredients like onions, garlic, meat (cut into pieces) and dry fruits in a few seconds, make crumbs (rusk) and prepare baby food. Do not use the herb chopper for liquid preparations (fruit juices, etc.)
- With the spice grinder (E) you can grind spices in a few seconds: coriander seeds, pepper, etc.
- These accessories are equipped with a bowl (F) that prevents access to the blades during use. Caution: leaks can occur if the accessory is not locked correctly.
3- Rotate the assembled assembly (D
or E) and position it on the motor unit. The red lock (open) aligned in the slot on the motor unit. (Fig 6 - position 1)
4- Then rotate the assembled
accessory (D or E) through a quarter turn clockwise until the green lock (closed) appears. (Fig. 6 - position 2).
5- Plug in the appliance and turn the
speed selector (B) to the desired position or apply a few pulses. Hold the bowl (F) when the appliance is running. To stop the appliance, turn the speed selector (B) back to position “0”.
6- Unlock the accessory by rotating it
through a quarter turn in the anticlockwise direction, until the red lock (open) appears. Remove the assembled accessory (D, E) from the motor unit. Turn it over on the worktop before unlocking the blade unit (d2, e2) from the bowl (F) in the reverse order of the assembly. The blades are very sharp: handle them with caution to avoid injury. You can then collect the preparation in the bowl.
1- Rotate the bowl (F) and pour the
2- Position the gasket (d1) or (e1) in
its recess on the blade unit (d2 or e2). (Fig. 4). Position the blade unit on the bowl aligning both the marks on the bowl and the blade unit. Lock the accessory by rotating the blade unit through a quarter turn in the anticlockwise direction. (Fig. 5).
- The colour of the bowl may change after blending certain very hard ingredients: (cloves, cinnamon, etc.).
Quantities (max.) Operating time Accessory Apricots / figs 40 g 3 s / speed 2
Crumbs 1 rusk In pulses
Onions 60 g 6 sec / speed 1
Parsley / fresh coriander 10 g In pulses
Coriander seeds 40 g 30 sec / speed 2
CLEANING YOUR APPLIANCE
- Unplug the appliance and remove the accessories
- Handle them with caution: the blades on the blender jug and accessories are sharp.
- Remove the jug and rinse it and its lid under running water.
- To clean the motor unit (A), use a moist cloth. Dry it carefully.
- Never immerse the motor unit (A) in running water.
- For easy cleaning, be sure to wash the removable parts in water and a little washing-up liquid immediately after use.
- The jug (C) and accessories (D, E) can be cleaned in the dishwasher in the top basket with the “ECO” or “LIGHTLY SOILED” programme.
- To clean the blender jug (C) easily, unlock the blade unit (c1) by rotating it through a quarter turn in the anticlockwise direction. Remove the gasket (c2) and clean them under running water or in the dishwasher.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ? Problems Product does not work. Excessive vibrations. Causes Solutions The plug is not fitted correctly into the socket . Plug the appliance into a socket and switch on. The jug or accessory is not correctly positioned or locked on the motor unit. Check that the jug or accessories are correctly positioned and locked onto the motor unit as shown in the figure in the manual. The product is not placed on a Place the product on a flat flat, stable, heat-resistant surface. surface. Volume of ingredients is too high. Reduce the quantity of ingredients processed. Volume of ingredients is too high. Reduce the quantity of ingredients processed. The lid is not correctly positioned. Leak from the base of the blender jug. The blender jug gasket (c2) is not positioned correctly or is missing. Reposition the gasket and lock the blade holder correctly. Leak from the base of the accessories. The gasket on the blade unit (d2) or (e2) is not positioned correctly or is missing. Reposition the gasket on the blade unit (d2) or (e2) and lock it correctly onto the bowl (F). The blade does not turn easily. Pieces of food too large or too hard. Reduce the size or quantity of ingredients processed. Add liquid Impossible to lock the blade unit with the gasket (c1+c2) on the jug (c3). The gasket (c2) is not positioned correctly. Reposition the gasket, the 3 folds should be visible as shown in Fig. 1. Leak from the lid. Your blender still does not work? service centre: Herb chopper accessory (D), Spice grinder accessory (E), or an additional blender jug (C). Contact an approved service centre (see list in service booklet). You can customise your blender and obtain the following accessories from your usual dealer or from an approved
- Disposal of the appliance and its packaging materials. The packaging is comprised exclusively of materials that present no danger for the environment and which may therefore be disposed of in accordance with the recycling measures in force in your area. For disposing of the device itself, please contact the appropriate service of your local authority.
- End of life electrical and electronic products: Your appliance is expected to last for many years. However, when the time comes to replace it, do not throw it into the bin, but take it to the recycling centre in your town (or to a waste reception centre where applicable). Think of the environment! Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point. HELPLINE: If you have any product problems or queries, please contact our Customer Relations Team first for expert help and advice: 0845 602 1454 – UK (01) 677 4003 – ROI or consult our website – www.moulinex.co.uk
Mandorle / nocciole sgusciate 60 g a impulsi
ManualGo.com