ELG-200-C2100DA - LED Controller Mean Well - Free user manual and instructions
Find the device manual for free ELG-200-C2100DA Mean Well in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Driver / Controller |
| Brand | Mean Well |
| Model | ELG-200-C2100DA |
| Category | LED Controller |
| Output Current | 2100 mA (constant current) |
| Output Power | 200 W |
| Input Voltage | 100 – 277 VAC (full range) |
| Dimming Interface | DALI (DA version) |
| Efficiency | > 87% typical |
| Dimensions (L x W x H) | 244 x 68 x 38 mm |
| Weight | 1.1 kg |
| Ingress Protection | IP67 (NEMA 6) |
| Protections | Over-voltage, Over-load, Short-circuit, Over-temperature |
| Cooling | Convection cooled (no fan) |
| Operating Temperature | -40°C to +70°C |
| Safety Standards | UL 8750, EN 61347, FCC Part 15B |
| Maintenance | Wipe with dry cloth; check connections periodically |
| Repairability | Unit not user-repairable; replace entire driver |
| Warranty | 5 years typical (Mean Well standard) |
Frequently Asked Questions - ELG-200-C2100DA Mean Well
How do I dim the ELG-200-C2100DA?
The DA version supports DALI dimming protocol. Connect a DALI bus controller to the dimming wires (purple and pink). Refer to the manual for addressing and setup.
What is the input voltage range?
The driver accepts 100-277 VAC (universal input) at 50/60 Hz. It can also operate on 127-250 VDC for emergency applications.
Can I adjust the output current?
The ELG-200-C2100DA is a fixed constant current model at 2100 mA. It is not adjustable. For adjustable current, consider the ELG-200-C series with built-in potentiometer.
Is the driver waterproof?
Yes, the driver has IP67 rating, meaning it is dust-tight and can withstand temporary immersion in water up to 1m depth.
What is the recommended dimming controller?
Any standard DALI master controller (e.g., Mean Well DALI-01) can be used. Ensure the DALI bus voltage is within 9.5-22.5V.
Can I use this driver in parallel for higher current?
No, Mean Well does not recommend parallel operation for constant current drivers. Use a single driver per LED load.
What are the dimensions and mounting options?
Dimensions are 244 x 68 x 38 mm. The driver includes mounting brackets and can be mounted vertically or horizontally with ventilation clearances.
How do I wire the input and output?
Input: L (brown), N (blue), Ground (green). Output: +V (red) and -V (blue). For DALI dimming, connect purple (DA+) and pink (DA-) to the bus. See the manual for wire cross-section and tightening torque.
What is the typical lifespan of this driver?
Mean Well driver lifespans typically exceed 50,000 hours at full load and 70°C case temperature, based on electrolytic capacitor ratings.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com or the Mean Well official website. It contains detailed wiring, dimming, and troubleshooting instructions.
User questions about ELG-200-C2100DA Mean Well
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your LED Controller in PDF format for free! Find your manual ELG-200-C2100DA - Mean Well and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ELG-200-C2100DA by Mean Well.