TEAM KA VT 17 - Fan

KA VT 17 - Fan TEAM - Free user manual and instructions

Find the device manual for free KA VT 17 TEAM in PDF.

📄 20 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice TEAM KA VT 17 - page 4
View the manual : Български BG English EN Español ES Português PT
Pick your language and provide your email: we'll send you a specifically translated version.
BrandTEAM
ModelKA VT 17
Product TypeFan (Stand fan)
Power Supply220-240 V ~ 50 Hz
Speed Settings3 (Low, Medium, High)
OscillationYes (horizontal)
Timer0.5 to 7.5 hours
Natural Breeze ModeYes (variable speed alternating)
Sleep ModeYes (step down sequence)
Remote ControlIncluded, operates with 2 x AAA batteries (not included)
Control PanelPush buttons on base (Power, Speed, Oscillation, Timer, Natural Breeze, Sleep)
AssemblyBase screws together, front and rear base snap
Safety GrilleYes
Cord LengthApprox. 1.5 m
MaterialPlastic (ABS)
CleaningWipe with damp cloth, vacuum grille; never immerse in water
Battery Type (Remote)2 x AAA
WeightApprox. 3.2 kg
HeightApprox. 130 cm
Base DiameterApprox. 35 cm

Frequently Asked Questions - KA VT 17 TEAM

How do I assemble the KA VT 17 fan?
Unplug the fan. Pass the power cord through the rear base. Align and slide the front and rear base parts together until they click. Insert the case into the base and tighten the screws clockwise with the provided screws. Place the fan on a flat, stable surface.
How do I use the remote control?
Point the remote control at the fan and press ON/OFF to turn on/off. Use SPEED to cycle through low, medium, high. Press SWING for oscillation, TIMER to set timer (0.5-7.5h), WIND for natural breeze, and SLEEP for sleep mode. Replace batteries with 2 AAA when needed.
What are the speed settings?
The fan has three speeds: I (Low), II (Medium), and III (High). Press the speed button on the control panel or the SPEED button on the remote to cycle between them.
How does the timer function work?
Press the TIMER button repeatedly to cycle through settings from 0.5 to 7.5 hours in 0.5-hour increments. The indicator lights will show the selected time. As time progresses, the lights indicate remaining time.
What is natural breeze mode?
Natural breeze mode simulates a variable wind by alternating between different speeds and stops. Press the WIND or button to activate. The fan will cycle through speeds depending on the current setting, e.g., at High it alternates between High, Medium, Low, and Stop.
What is sleep mode?
Sleep mode sequences like natural breeze but gradually steps down to a lower speed after preset times. Press or SLEEP again to select. For example, starting at High, after 30 minutes it changes to Medium, then after another hour to Low. Press again to return to constant speed.
How do I clean the fan?
Always unplug before cleaning. Wipe plastic parts with a damp cloth. Use a vacuum cleaner to remove dust from the grille without disassembling. Never immerse the fan in water or use abrasive cleaners.
Why is my fan not oscillating?
Press the SWING button (or on control panel) to start oscillation. If it does not work, check that the fan is on a flat surface and the base is properly assembled. If still not oscillating, the mechanism may be jammed; contact service.
Can I use the fan outdoors?
No, the fan is designed for indoor domestic use only. Never use it outside or in wet areas to avoid electrical hazard.
What should I do if the fan stops working?
Check the power cord and plug. Ensure the fan is assembled correctly and the base screws are tight. Verify the mains voltage matches the rating. If it still does not work, contact a qualified electrician or the after-sales service.

User questions about KA VT 17 TEAM

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Fan in PDF format for free! Find your manual KA VT 17 - TEAM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KA VT 17 by TEAM.

USER MANUAL KA VT 17 TEAM

  1. Air outlet grille
  2. Front case
  3. Control panel
  4. Remote control
  5. Front base
  6. Screws
  7. Rear base
  8. Power cord

SP

Please read these instructions carefully before using the appliance, and always follow the safety and operating instructions.

Important: People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instructions concerning the safe use of the appliance. Close supervision is necessary to prevent children from using the appliance as a toy.

☐ Check that your mains voltage corresponds to that stated on the appliance.
☐ Never leave the appliance unsupervised when in use.
From time to time check the appliance for damages. Never use the appliance if cord or appliance shows any signs of damage but have it checked and repaired by a competent qualified service ^[1] . Should the cord be damaged, it must be replaced by a competent qualified service ^[2] .
☐ Only use the appliance for domestic purposes and in the way indicated in these instructions.
☐ Never immerse the appliance in water or any other liquid for any reason whatsoever. Avoid splashes on the appliance.
☐ Never use the appliance near hot surfaces.
☐ Unplug the appliance before cleaning it.
☐ Never use the appliance outside and always place it in a dry environment.
☐ Never use accessories that are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.
☐ Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it.
☐ It is absolutely necessary to unplug the appliance before assembling the base or any other part or before disassembling it.
☐ Make sure the assembly is correctly made before plugging in the appliance. Never try to start the appliance without its protection guard.
☐ Make sure the appliance is switched to the off position before unplugging it.
☐ Do not insert your fingers, pencils, or any other objects in the protection guard.
☐ Do not touch the appliance with wet hands.
☐ Do not put the fan on the outside of a window or any other unsteady place. Make sure the appliance is put on a flat surface in order to avoid vibrations.
☐ When used in an inappropriate manner the appliance could constitute a danger to the user, in that case the producer cannot be held responsible for any kind of possible damages.
☐ Do not let the fan in use for long periods during your absence. Make sure it is switched off before leaving.
☐ Do not point the fan in the direction of a sick or sleeping person.
☐ When cleaning the appliance, do not disassemble the guards, check the cleaning section.

(1) Competent qualified electrician: after-sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In case of need you should return the appliance to this electrician.

ASSEMBLY (see picture page 2)

  • Before mounting the appliance, make sure it is unplugged.
    • Pass the power cord (8) through the central gate of the rear base (7).
    • Assemble the base by matching and sliding the front and the rear base together.
  • Insert the case (2) into the base and tighten the screws (6) clockwise.
    • Pass the cord (8) into through the wire casing in the base.
  • Put the fan on its base. It is now ready for use.

OPERATION

  • Plug in the appliance and press ⏻ on the control panel or ON/OFF on the remote control to turn the fan on.
  • To increase the speed setting of the fan, press 🌐 again or press SPEED on the remote control. The light on the indicator panel will come on to show the selected speed. I Low II Medium III High
  • To switch on the oscillation function, press the ⬆ on the control panel or SWING on the remote control, press again to stop. The oscillation will stop with the fan in the last position before pressing the button.
  • The fan can be used continuously or on a timer. To select the timer, press ⏻ on the control panel or TIMER on the remote control and continue to press to cycle through the settings (0.5 to 7.5 hrs). The lights will come on to show the time selected. For example, all lights will be lit when 7.5hrs is selected, the 0.5, 1 & 2 lights will be lit when 3.5hrs is selected. The light combination will change as the time progresses to show the time remaining before the fan will stop.
  • For natural breeze movement (variable fan speed), press △ on the control panel or WIND on the remote control. The 📋 will light on the indicator panel and the fan speed will now alternate. For example if the fan speed setting is high (III) and natural breeze selected, the fan will alternate between high, medium, low and stop to simulate a natural breeze. For example if fan speed setting is at low (I) and natural breeze selected, the fan will alternate between low and stop to simulate a natural breeze.
  • Press △ again to select the sleep setting, the 📁 will light on the indicator panel. This programme has the same sequences as natural breeze but will step down the lower speed sequence after the preset time until the lowest fan speed sequence is reached. For example, if the fan speed setting is at high (III) and the sleep setting is selected, after half an hour the sequence will change to medium speed sequence and after another hour it will change to the low speed sequence. Press △ again to return to constant fan speed.
  • Press ⏻ on the control panel or ON/OFF on the remote control to switch the fan off.

REPLACING THE BATTERIES

- To replace the batteries of the remote control, press the indentations on the back of the remote control and remove the cover. Insert 2 AAA batteries as shown inside the remote control and replace the cover.

TEAM KA VT 17 - REPLACING THE BATTERIES - 1

Fax +32 2 359 95 50

Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don't change the page numbering. Keep the language integrity.

- When you decide to throw away the appliance, make sure to remove the battery and to dispose of it in an ecological manner by handing it in a place intended for this end.

CLEANING AND CARE

  • Always disconnect the power supply cable from the power supply before carrying out any cleaning operation.
  • To remove dirt from the plastic surfaces, use a cloth moistened with a little water. Never use abrasive products, as these could damage the appliance.
  • Use a vacuum cleaner to remove the dust from the ventilation grille without having to disassemble it.
  • Never immerse the fan in water or any other liquid.

PROTECTION OF THE ENVIRONMENT - DIRECTIVE 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and electronic equipment should be disposed of in accordance with specific rules with the

TEAM KA VT 17 - PROTECTION OF THE ENVIRONMENT - DIRECTIVE 2002/96/EC - 1

implication of both suppliers and users. For this reason, as indicated by the symbol — the rating label or on the packaging, your appliance should not be disposed of as unsorted municipal waste. The user has the right to bring it to a municipal collection point performing waste recovery by means of reuse, recycling or use for other applications in accordance with the directive.

SP MANUAL DE INSTRUCCIONES

Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don't change the page numbering. Keep the language integrity.

TEAM KA VT 17 - SP MANUAL DE INSTRUCCIONES - 1

Fax +32 2 359 95 50

Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don't change the page numbering. Keep the language integrity.

TEAM KA VT 17 - SP MANUAL DE INSTRUCCIONES - 2

Fax +32 2 359 95 50

Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don't change the page numbering. Keep the language integrity.

TEAM KA VT 17

natural_image Abstract black-and-white geometric design with a circle and arrow-like shape (no text or symbols)

KALORIK

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : TEAM

Model : KA VT 17

Category : Fan