KSV35CRC - Air Conditioning KELVINATOR - Free user manual and instructions
Find the device manual for free KSV35CRC KELVINATOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted split air conditioner |
| Model | KSV35CRC |
| Brand | Kelvinator |
| Cooling Capacity | 3.5 kW (12,000 BTU/h) |
| Heating Capacity | 3.5 kW (12,000 BTU/h) |
| Power Input (Cooling) | 1.2 kW |
| Power Input (Heating) | 1.2 kW |
| Energy Efficiency Ratio (EER) | 3.0 |
| Refrigerant | R32 |
| Voltage | 220-240 V ~ 50 Hz |
| Indoor Unit Dimensions (WxHxD) | 800 x 290 x 200 mm |
| Outdoor Unit Dimensions (WxHxD) | 700 x 550 x 250 mm |
| Indoor Unit Weight | 10 kg |
| Outdoor Unit Weight | 30 kg |
| Noise Level (Indoor/Outdoor) | 30-50 dB / 55-65 dB |
| Control | Remote control, timer, auto swing |
| Modes | Cool, Heat, Fan, Dry |
| Filter | Washable filter |
| Installation | Professional installation required |
Frequently Asked Questions - KSV35CRC KELVINATOR
How to clean the air conditioner filter?
Turn off the unit and unplug it. Open the front panel, remove the filter, and wash it with lukewarm water and mild detergent. Let it dry completely before reinstalling. Clean every two weeks during heavy use.
Why is my air conditioner not cooling?
Check if the filter is dirty or the thermostat is set correctly. Ensure the outdoor unit is not obstructed. If the problem persists, there may be a refrigerant leak or compressor issue. Contact a professional.
How to set the timer?
Press the Timer button on the remote. Use the + and - buttons to set the desired on/off time. Press Timer again to confirm. The unit will automatically turn on/off at the set time.
What does the error code E1 mean?
Error code E1 indicates a room temperature sensor failure. Turn off the unit and restart after a few minutes. If the error persists, contact a service technician.
How to use the remote control?
Point the remote at the indoor unit. Press Mode to select Cool, Heat, Fan, or Dry. Use Temp buttons to adjust temperature, Fan for speed, and Swing for louver direction. Replace batteries if unresponsive.
Is the unit quiet?
Yes, the indoor unit operates at 30-50 dB, similar to a whisper or library. The outdoor unit may be slightly louder at 55-65 dB, but it is designed for quiet operation.
How to switch between cooling and heating?
Press the Mode button on the remote repeatedly until Cool or Heat appears on the display. The unit will change modes accordingly. Note: Heating may take a few minutes to start.
What is the recommended maintenance?
Clean the filter every two weeks. Check the outdoor unit for debris monthly. Have the system professionally serviced annually to check refrigerant levels and electrical connections.
Can I install the unit myself?
No, installation requires professional expertise due to refrigerant handling, electrical connections, and proper drainage. Improper installation may void the warranty and cause damage.
What is the refrigerant type?
The unit uses R32 refrigerant, which is more environmentally friendly than older types. It has a low global warming potential and is efficient for cooling and heating.
User questions about KSV35CRC KELVINATOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual KSV35CRC - KELVINATOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KSV35CRC by KELVINATOR.